Donator-Acceptor Komplex Chromatographie Tetrachlorphthalimidopropylsilica,eine neue,chemisch gebundene Phase,geeignet zur Trennung von Kohleverflüssigungsprodukten und anderen technischen aromatischen Gemischen mit der Hochleistungsflüssigkeitschromatographie

Summary The preparation of a new tetrachlorophthalimidophase for HPLC is described. The capacity ratios (k) of about forty aromatics and twenty nitrogen-containing aromatics were determined. Most of the compounds used were alkylated. It was shown that the aromatics were eluted according to the number of rings, only slightly influenced by the substituents. A similar elution order was not observed with the heteroaromatics. The performance of the stationary phase is demonstrated, performing separations of coal liquids and other aromatic mixtures.

---

Donator-Acceptor Komplex Chromatographie Tetrachlorphthalimidopropylsilica, eine neue, chemisch gebundene Phase, geeignet zur Trennung von Kohleverflüssigungsprodukten und anderen technischen aromatischen Gemischen mit der Hochleistungsflüssigkeitschromatographie

Zusammenfassung Es wird die Synthese einer neuen Tetrachlorphthalimid-Phase für die HPLC beschrieben. Anhand von Elutionsversuchen mit über vierzig Aromaten und zwanzig N-Heteroaromaten, die größtenteils alkyliert waren, konnte gezeigt werden, daß kondensierte Aromaten unabhängig vom Alkylierungsgrad streng nach der Zahl der aromatischen Ringe eluiert werden, was für die Heterocyclen nicht zutrifft. Die Kapazitätsverhältnisse (k) der untersuchten Verbindungen werden angegeben. Die Leistungsfähigkeit der Phase wird an der chromatographischen Trennung von Kohleverflüssigungsprodukten und anderen komplexen, aromatischen Gemischen demonstriert.

     

Determination of paraquat in human blood plasma using reversed-phase ion-pair high-performance liquid chromatography with direct sample injection

This report describes the determination of paraquat (PQ) in human blood plasma samples by a direct-injection reversed-phase ion-pair chromatographic method. Blood plasma filtrate was injected directly into the LiChrospher® RP-18 alkyl-diol silica (ADS) precolumn integrated in a column switching system using a mixture of 3% 2-propanol and 10 mM sodium octane sulfonate (SOS) in a 0.05 M phosphate buffer (pH 2.8). After washing with this phase, the ADS precolumn was back-flushed with the analytical mobile phase consisting of 40% of methanol and 10 mM SOS in a 0.05 M phosphate buffer (pH 2.8) at a flow rate of 1.0 ml min⁻¹, in order to carry the analyte to a conventional reversed-phase analytical column, where the separation of PQ was achieved and finally detected by UV at 258 nm. The recoveries of PQ from human blood plasma samples ranged between 95.0 and 99.5% at nine different concentrations (from 0.05 to 3.00 μg of PQ ml⁻¹) with coefficients of variation <2.5% (n=3). The precision expressed as relative standard deviation was below 3.5% for between-day and below 4.3% for within-day measurements (n=5). The detection limit (signal-to-noise ratio, S/N>3) was 0.005 μg ml⁻¹ with an injection volume of 200 μl. The proposed method is promising for the identification and quantification of PQ at low concentration levels and is suitable for its analysis in human blood plasma samples from intentional or accidental poisonings cases with a sample throughput of 5 samples per hour.     

Carbenium ion pairs on silica: UV-spectroscopic and electrokinetic measurements of triarylmethylium/halide-aerosil in 1,2-dichloroethane

The interaction of carbenium ion pairs with silica is studied by means of UV-spectroscopy, electrokinetic and adsorption measurements using triphenylmethyl derivatives, (RC₆H₄)₃CX, (X=F, Cl, Br, SCN, OH; R=Cl, I, H, CH₃, C(CH₃)₃, OCH₃, N(CH₃)₂) in interaction with silica particles suspended in 1,2-dichloroethane. The adsorption of triarylmethyl-halides onto silica is accompanied by the heterolytic dissociation of the tertiary carbonhalogen bond. The degree of ionization depends on the basicity of the counter anion and acidity of the cation, respectively. The influences of both concentration and structure of triarylmethyl halides on the zeta-potential are discussed with regard to steric and electronic factor. The zeta-potential values of the adsorbates decrease significantly, as compared with the free silica surface, from a certain triarylmethyl halide concentration where ionization takes place, to a constant level which is characteristic of the carbenium ion pair. These constant zeta-potential values of the adsorbates depend on the basicity of the counter ion and the _p Hammett constants of the ring substitutents, with exclusion of sterically hindered substituents and salt derivatives, e.g., crystal violet and malachite green.     

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO₂:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.     

High-performance liquid chromatography of sulfonamides and quinolones on p-tert-butyl-calix[6]arene-bonded silica gel stationary phase

The high-performance liquid chromatographic behavior of some sulfonamides and quinolones was studied on a p-tert-butyl-calix[6]arene-bonded silica gel stationary phase. The effect of mobile phase variables such as methanol content, ionic strength and pH on their chromatographic behavior was investigated. The retention behavior of sulfonamides on the stationary phase was compared with that on both Zorbax C₁₈-bonded silica gel and γ-(ethylenediamino)propyltriethoxylsilane-bonded silica gel (diamino-bonded phase). The retention mechanism of sulfonamides and quinolones on the stationary phase was also discussed. The results indicate that the stationary phase behaves as a reversed-phase packing and its separation selectivity is much better than that of not only Zorbax C₁₈ phase but also diamino-bonded phase. Some sulfonamides and quinolones were separated on the stationary phase, but the separation of sulfonamides is far more successful.     

One-phase supported titanium-based catalysts for polymerization of ethylene. III. ESR spectra of the ternary system Sio2—R3Al—TiCl4

The ternary catalyst systems based on activated silica, aluminum alkyl, and titanium tetrachloride were polymerized in an ethylene gas-phase polymerization process, and further studied using ESR spectroscopy. Two types of titanium (III) ESR-active centers were observed and a linear dependence between the concentration of that characterized by a rhombic anisotropic signal with g₁ = 1.962, g₂ = 1.945, and g₃ = 1.913 values and catalyst productivity was found. © 1993 John Wiley & Sons, Inc.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

不同添加物和制备方式对Al2O3热稳定性的影响

通过水溶液成胶和丙三醇络事助成胶制备了不同的结构的γ－Ａｌ２Ｏ３,研究了Ｌａ,Ｓｉ,Ｂａ以及Ｌａ,Ｓｉ和Ｌａ,Ｂａ双组分改性对它们结构热稳定的作用,讨论了改性元素的引入方式及硅铝比的影响。结果表明,丙三醇络合助成胶能明显提高Ａｌ２Ｏ３的比表面积和孔径,并能显著改善Ａｌ２Ｏ３的热稳定性。     

The Effect of the Nature and Structure of Adsorbents on Interaction with Ibuprofen

The interaction of ibuprofen [2-(4-isobutylphenyl)propionic acid] with the surface of carbon and oxide adsorbents was investigated. The significant role of wide pores during the adsorption of ibuprofen on carbon adsorbents in the presence of protein molecules was demonstrated. At low concentrations ibuprofen is adsorbed on the surface of hydrophilic and hydrophobic adsorbents in the form of a monomer, but the contribution from the adsorbed dimer increases with increase in its concentration.