X射线Kirkpatrick-Baez显微镜用超反射镜的研制

 介绍了一种可应用于X射线Kirkpatrick-Baez（KB）显微镜的光学元件—X射线超反射镜。选用的W和B₄C作为镀膜材料，膜对数为20，采用单纯型调优的方法实现了X射线超反射镜设计，用磁控溅射的方法在Si基片上完成了W/B₄C X射线超反射镜的制备。采用高分辨率X射线衍射仪（8 keV）测量了X射线超反射镜的反射特性。制备的X射线超反射镜在掠入射角分别为1.052°和1.143°处，反射角度带宽为0.3°，反射率达到20%，可满足KB型显微镜的要求。     

激光等离子体脉冲软X光标定源

 利用神光Ⅱ上激光与等离子体相互作用得到的软X光，建立了基于多层镜的四通道软X光单色器系统。研究了光源的性能，测量了光源强度、单色器系统稳定性、相应通道的一致性。研究表明，采用多层镜作为脉冲光源的分光元件，可以得到具有较好单色性的强脉冲软X 光标定源。光源的光子能量为253 eV和820 eV，两能道的光源强度分别为1.8×10¹⁹ photon/(s·cm²)和3.2×10¹⁹ photon/(s·cm²)。在该标定源上可以实现XRD、平面镜、多层镜、透射光栅和滤片的标定。     

Self-assembled structures of alkanethiols on gold-coated cantilever tips and substrates for atomic force microscopy: Molecular organisation and conditions for reproducible deposition

Measurements of surface-liquid interactions (contact-angle goniometry) and tip-surface adhesion forces (atomic force microscopy) combined with infrared spectroscopic studies have been used to investigate surface-preparation and solution-deposition conditions for the reproducible formation of self-assembled molecular structures on gold-coated tips and substrates for atomic force microscopy. Preliminary data show that surface-saturated self-assembled monolayers form reproducibly on prolonged (>20 h) exposure of gold-coated glass substrates to ethanolic solutions of ω-functionalised alkanethiols in the concentration range 80-160 mmol dm⁻³. The data also show that exposure for 16 h to alkanethiol concentrations in the range 160-240 mmol dm⁻³ promote bilayer formation whereas concentrations of 240-320 mmol dm⁻³ result in the deposition of multilayers, the average orientation of which is parallel to that of the first molecular layer; the use of parent 1-undecanethiol solutions at concentrations of 1-80 mmol dm⁻³ results in incomplete monolayer coverage.     

Spectral characterization of EUV radiation emitted from a laser-irradiated gas puff target

A laser-plasma EUV source is described, which is going to be utilized for characterization of EUV optical components and sensoric devices in the wavelength region from 11 to 13 nm. EUV radiation is generated by focusing a Nd:YAG laser into a double stream gas puff target. By the use of different target gases, broadband as well as narrow-band EUV radiation can be obtained. The emission characteristics of the radiation is monitored by the help of different diagnostic tools including a pinhole camera, an EUV spectrometer, and various EUV photodiodes, either directly or after reflection from multilayer mirrors. Theoretical calculations of collision-induced energy transfer are given in order to explain the observed high degree of electronic excitation in the utilized target gases.     

Low-temperature, solution processing of TiO2 thin films and fabrication of multilayer dielectric optical elements

High-quality TiO₂ thin films have been deposited from aqueous titanium-peroxo solutions via spin coating. The effects of precursor solution pH on the crystallization behavior, morphology, density, and refractive index of the films are reported. From X-ray diffraction measurements, the amorphous as-deposited films are found to crystallize in the anatase phase at 250 °C. Surface and cross-section SEM images reveal that films deposited from an acidic precursor are more uniform and denser than those deposited from a basic precursor. X-ray reflectivity measurements show that films with smooth surfaces and high densities (up to 87% of single-crystal anatase) can be produced at temperatures as low as 300 °C. Measured densities are consistent with high refractive indices at 633 nm of 2.24 and 2.11 for films derived from acidic and basic precursors, respectively. The uniformity and dense nature of the films have allowed fabrication of multilayer dielectric optical elements with thermal processing at only 300 °C. The distributed Bragg reflector with four bilayers exhibits a reflectance of 92% and a stop band width of 150 nm. The optical microcavity has a quality factor of 20. The optical properties of all elements agree well with theoretical models, indicating good optical quality. Use of the precursor chemistry for direct photopatterning of TiO₂ films without a polymer resist is also demonstrated.     

Mucin layers and multilayers — Physicochemical properties and applications

The present review summarizes recent, and important previous, findings on properties of mucin layers and multilayers and ways to tailor their properties. Specifically, progress has been made in understanding the effects of mucin type, preparations, ambient conditions and surface properties on adsorption and on mixed layer assembly including multilayers. Apart from structural features the stability, lubrication and biological functions of such layers are addressed.     

Investigation of resonant properties of metal core–shell nanoparticles using T-matrix calculations

Using T-matrix method, plasmon resonance properties of metal core–shell nanoparticles are systematically investigated. It is shown that dielectric/metal core–shell structure may be excited stronger at resonance than metal/dielectric and hetero-metal ones, but the resonance states are extremely sensible to the layers thickness. For three-layer nanospheres, resonance properties will be dominated by a sub-10 nm silver outermost shell, while only weakened by a silica one. Finally, tiny eccentric distance between the centers of core and shell in eccentric two-layer nanoparticles may fundamentally change the resonance mode of nanoparticles, and results in higher local electrical field enhancement than concentric nanospheres.     

Effects of pulsed bias duty ratio on microstructure and mechanical properties of TiN/TiAlN multilayer coatings

TiN/TiAlN multilayer coatings were deposited on M2 high speed steel by a pulsed bias arc ion plating system. The effect of pulsed bias duty ratio on the microstructure, mechanical and wear properties was investigated. The amount of macroparticles reduced with the increase of the duty ratio. The surface roughness was 0.0858 μm at duty ratio of 50%. TiN/TiAlN multilayer coatings were crystallized with orientations in the (1 1 1), (2 0 0) (2 2 2) and (3 1 1) crystallographic planes and the microstructure strengthened at (1 1 1) preferred orientation. At duty ratio of 20%, the hardness of TiN/TiAlN multilayer coatings reached a maximum of 3004 HV, which was 3.2 times that of the substrate. The adhesion strength reached a maximum of 77 N at 50% duty ratio. Friction and wear analyses were carried out by pin-on-disc tester at room temperature. Compared with the substrate, all the specimens coated with TiN/TiAlN multilayer coatings exhibited better tribological properties.     

Magnetic superlattices and multilayers

We briefly review the active areas of current research in magnetic superlattices, emphasizing later years. With recent widening use of advanced technologies, more emphasis has been made on quantitative atomic level chemical and structural characterization. Examples where the multilayer structure has been controlled, characterized and correlated with the physical properties are discussed. The physical properties are categorized according to the complexity of a structure needed to observe a particular effect. We outline a number of general important unsolved problems, which could considerably benefit from theoretical and experimental input. An extensive list of magnetic multilayer materials is provided, with references to recent publications.     

Langmuir-Blodgett film structure

Langmuir-Blodgett (LB) films occupy a unique niche at the crossroads of materials science, complex fluids, and biophysics. They have many similarities to inorganic epitaxial films due to the layer by layer deposition process; however, the amphiphilic nature of the constituent molecules provides the connection to lyotropic liquid crystals and membranes. A great deal is known about LB film structure and thermodynamic behavior; both from classical studies as well as from recent experiments using sophisticated characterization techniques such as synchrotron X-ray scattering and scanning probe microscopy. This article summarizes the current understanding of these systems from a physical/structural point of view. Included are discussions of the deposition process, the layered nature of LB films, intralayer molecular packing, defects, stability, and phase transitions.