A one-pot synthesis of 1,2,4,5-tetraarylimidazoles using molecular iodine as an efficient catalyst

Molecular iodine is a cheap, nontoxic catalyst, which acts as an efficient catalyst for the synthesis of 1,2,4,5-tetraarylimidazoles using benzoin, an aromatic aldehyde and an amine in the presence of ammonium acetate. The advantage of this method is the direct use of benzoin, which is transformed into benzil in situ and condenses further to generate the imidazole in a one-pot sequence.     

聚异丁烯高活性端基含量及相对分子质量测定方法的研究

综合使用核磁，VPO和近红外光谱分析技术对聚异丁烯活性端基含量以及相对分子质量的测定进行了详细研究，分别建立核测定聚异丁烯活性端基含量以及其他烯键含量和近红外光谱快速测量聚异聚丁烯活性端基含量。其他烯键含量和相对分子质量的分析方法。成对t检验结果表明，近红外光谱分析方法测定结果与核磁和VPO方法测定结果之间无显著性差异。     

Interaction of metals with an organic semiconductor: Ag and In on PTCDA

The interaction of Ag and In with a thin film of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) was studied by near-edge X-ray absorption fine structure (NEXAFS). Upon Ag deposition on a PTCDA film of 20 nm thickness the relative intensities and lineshapes, as well as the angular dependence of the spectra remains unchanged, illustrating the formation of a chemically unreactive Ag/PTCDA interface. On the other hand, the adsorption of 0.3 nm In strongly decreases the intensity of the π^* resonances in C and O K-edge NEXAFS spectra. This is attributed to a strong charge transfer between In and PTCDA, leading to a redistribution of the charge in the molecule. However, the absence of a strong shift or new features and negligible dependence of peak intensities corresponding to π^* resonances on the In thickness indicate that the interaction between In and PTCDA is not accompanied by a covalent bond formation.     

利用手征SU(3)夸克模型研究轻双Λ超核^6_ΛΛHe,^5_ΛΛHe,^5_ΛΛH,^4_ΛΛHe,和^4_ΛΛH的结合能

在手征SU(3)夸克集团模型下, 通过共振群方法(RGM)计算了双Λ超核^6_ΛΛHe,^5_ΛΛHe,^5_ΛΛH,^4_ΛΛHe,和^4_ΛΛH的结合能. 结果表明, 假定双Λ超核具有双Λ集团和壳心核集团构成的两集团结构, 得到的^6_ΛΛHe超核的结合能与实验值基本吻合, 表明手征SU(3)夸克集团模型不仅能较好地描述重子谱、N-N和Y-N相互作用及轻Λ超核的结合能, 也能较好地描述Y-Y相互作用及双Λ超核^6_ΛΛHe,^5_ΛΛHe,^5_ΛΛH,^4_ΛΛHe,和^4_ΛΛH的结合能, 指出了它们存在的可能性.     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

Variation of interband interaction strength in odd-A nuclei

Bandcrossing in 31 rotational bands of 25 different odd-A nuclei in the rare-earth region has been analysed by using a two-band mixing formalism with a constant band interaction within the framework of the effective decoupling picture. The interband interaction strengthV between the one-quasiparticle band and the three-quasiparticle band exhibits a variation with the neutron number which is not different from the oscillatory behaviour observed in even-even nuclei and does not show signs of any appreciable phase shifting as predicted by theory. However, the overall range of variation ofV is greater than that observed in even-even systems.     

Isolation and Characterization of Proteins Interacting with Activin Type Ⅱ Receptors

Introduction Activinisamemberofthetransforminggrowth factor(TGF)βsuperfamilyofextracellularsignaling proteins.Themembersofthisfamilyplayacriticalrole duringembryogenesisandinmaintainingtissuehomeo stasisinadultlife[1—3].DeregulatedTGFfamilysigna lingisi…     

Synthesis and Properties of a Heteronuclear Ag（Ⅰ）/Ni（Ⅱ） Complex

Introduction Itiswell knownthatcyanogroupsincyanometa latessuchas[Ag(CN)2]-unitscanbeusedasbridg ingligandsandapolymericstructurecanbeformed throughsilver silver(argentophilic)interactions.This propertyhasbeenexploredintheconstructionofmany oligomericandp…     

Epitaxy: the motion picture

The engineering of many modern electronic devices demands control over a crystal down to the thickness of a single layer of atoms—and future demands will be even more challenging. Such control is achieved by the method of crystal growth known as epitaxy, and that makes this method the subject of intense study. More than that, recent advances are revolutionizing our knowledge of how surfaces grow. In fact, growing surfaces show a beautifully rich variety of phenomena, many of which are only now beginning to be uncovered. In the past few years many surface imaging techniques have been used to give us a close look at how crystals grow—while they are growing. The purpose of this article will be to illustrate some of the ways real surfaces grow and change as revealed by some of the latest in situ microscopic imaging technologies.

It is often said that crystal growth is more of an art than a science. Here we will show that it is emphatically both.