Speciation of aluminium fluoride complexes and Al in soils from the vicinity of an aluminium smelter plant by hyphenated High Performance Ion Chromatography Flame Atomic Absorption Spectrometry technique

The paper presents a new tool for the determination of inorganic speciation forms of aluminium: AlF_n^{(3 − n)+}, and Al³⁺ by means of the HPIC-FAAS. The proposed method has been successfully used for speciation analysis (qualitative and quantitative) of inorganic aluminium forms AlF_n^{(3 − n)+} in soil samples. In order to isolate the most environmentally available fraction, 5 g of the sample was collected and extracted in deionised water (water soluble fraction) for 1 h using a magnetic stirrer. The determinations in a hyphenated technique system were performed for a number of prepared water extracts. Concentration determinations of particular aluminium forms were performed based on model studies and real samples. The separation of Al species with nominal charge of + 1, + 2, and + 3 required a run time of less than 4 min during a single analysis. Based on the analysis of water extracts of soil, it was obtained that aluminium forms elute in the following order: 1PA (first signal) — AlF₂⁺ and/or AlF₄⁻; 2PA (second signal) — AlF²⁺ and/or AlF₃⁰; 3PA (third signal) — Al³⁺. In order to confirm the occurrence of these forms a simulation using the Mineql program was conducted. The details of speciation analysis of aluminium fluoride forms by means of an HPIC-FAAS instrument equipped are presented. Interpretation of the speciation analysis of the water soluble fraction of soil samples is proposed, based on the separation during chromatographic run and calculated data by Mineql.     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings

The present study has been conducted in order to determine the influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings. Six types of coating samples with different substrate roughness were tested. The surface roughness and real surface area of both the substrates and coatings were studied by atomic force microscopy (AFM) techniques. The scratch tests performed at progressive loads were employed to evaluate the adhesion of the coatings. Cyclic oxidation tests were performed at 1100 °C in air for 50 cycles, each cycle consisting of 1 h heating in the tube furnace followed by 15 min cooling in the open air. The AFM measurements exhibit that the surface roughness of the sputtered NiCoCrAlY coating increases with the increasing of the superalloy substrate roughness. The NiCoCrAlY coatings present slightly lower roughness than the corresponding superalloy substrate. The scratch adhesion tests indicate that the coatings on substrates with a smoother surface possess better adhesion than on those with a rougher surface. Both the real surface area and oxidation weight gain of the coatings decrease with the decreasing of the superalloy substrate roughness. The NiCoCrAlY coating sputtered on the superalloy substrate with lower roughness provides relatively higher antioxidant protection than that provided by the coating with rougher substrate.     

Self-organized critical model for protein folding

The major factor that drives a protein toward collapse and folding is the hydrophobic effect. At the folding process a hydrophobic core is shielded by the solvent-accessible surface area of the protein. We study the fractal behavior of 5526 protein structures present in the Brookhaven Protein Data Bank. Power laws of protein mass, volume and solvent-accessible surface area are measured independently. The present findings indicate that self-organized criticality is an alternative explanation for the protein folding. Also we note that the protein packing is an independent and constant value because the self-similar behavior of the volumes and protein masses have the same fractal dimension. This power law guarantees that a protein is a complex system. From the analyzed data, q-Gaussian distributions seem to fit well this class of systems.     

Assessment of pulmonary artery stiffness using velocity-encoding magnetic resonance imaging: evaluation of techniques

The loss of pulmonary artery (PA) compliance has significant pathophysiological effect on the right ventricle. Noninvasive and reliable assessment of PA wall stiffness would be an essential determiner of right heart load and a clinically useful factor to assess cardiovascular risk. Two MRI techniques have been proposed for assessing PA stiffness by measuring pulse wave velocity (PWV): transit time (TT) and flow area (QA). However, no data are available that compares the two techniques and evaluates their performance, especially over a wide range of PWV values or at 3.0-T, which is the purpose of the present study. Thirty-three patients with different heart conditions were imaged using optimized high-temporal resolution and high-spatial resolution velocity-encoding MRI sequences. Statistical analysis was conducted to study intermethod, interobserver and intraobserver variabilities. The PWV measurements using TT and QA techniques showed good agreement (P>0.1). The Bland-Altman analysis showed negligible differences between the two methods (mean±S.D.=0.11±0.35 m/s, correlation coefficient r=0.94). The repeated measurements showed low interobserver and intraobserver variabilities, although the S.D. of the differences was larger in the QA technique. The mean±S.D. of the TT/QA measurement differences were −0.05±0.2/0.0±0.36 m/s and 0.02±0.26/0.02±0.39 m/s for the interobserver and intraobserver differences, respectively. In conclusion, each technique has its own advantages and disadvantages. The two techniques result in similar measurements, although the QA method is more subjective due to its dependency on operator intervention.     

Area integral functions for sectorial operators on L spaces

Area integral functions are introduced for sectorial operators on L^p-spaces. We establish the equivalence between the square and area integral functions for sectorial operators on L^p spaces. This follows that the results of Cowling, Doust, McIntosh, Yagi, and Le Merdy on H^infin functional calculus of sectorial operators on L^p-spaces hold true when the square functions are replaced by the area integral functions.     

Generalized area operators on L^p（R^n）

We introduce the generalized area operators by using nonnegative measures defined on upper half-spaces R＋^n＋1. The characterization of the boundedness and compactness of the generalized area operator from LP（]Rn） to Lq（IRn） is investigated in terms of s-Carleson measures with 1 〈 p, q 〈 ＋∞. In the case of p = q = 1, the weak type estimate is also obtained.     

Commutators of Littlewood-Paley Operators on Herz Spaces with Variable Exponent

Let ? ∈ L~2(S~(n-1)) be homogeneous function of degree zero and b be BMO functions. In this paper, we obtain some boundedness of the Littlewood-Paley Operators and their higher-order commutators on Herz spaces with variable exponent.