具有白指数律重合性的GM(1,1)模型

通过分析 GM( 1 ,1 )建模机理 ,找出了 GM( 1 ,1 )模型不具有白指数律重合性的原因 ,并在此基础上 ,提出了建立 GM( 1 ,1 )模型的新方法 .新方法克服了原方法不具有白指数律重合性的缺陷 ,突破了 | a|较大时GM( 1 ,1 )模型不能应用的禁区 ,提高了建模的精度 .     

一种四次有理插值样条及其逼近性质

1引言有理样条函数是多项式样条函数的一种自然推广,但由于有理样条空间的复杂性,所以有关它的研究成果不象多项式样条那样完美,许多问题还值得进一步的研究．近几十年来,有理插值样条,特别是有理三次有理插值样条,由于它们在曲线曲面设计中的应用,已有许多学者进行了深入研究,取得了一系列的成果(见[1]-[7])．但四次有理插值样条由于其构造所花费的计算量太大以及在使用上很不方便而让人们忽视了其重要的应用价值,因此很少有人研究他们．实际上,在某些情况下四次有理插值样条有其独特的应用效果,如文[8]建立的一种具有局部插值性质的分母为二次的四次有理样条,即一个剖分     

Uncertainty of chemical oxygen demand determination in wastewater samples

 The measurement uncertainty of the result of chemical oxygen demand determination in wastewater was evaluated. The major sources of uncertainty of the result of measurement were identified as the purity of reagents, volumetric operations, gravimetric operations, bias, and the repeatability of the method. Identification and evaluation of uncertainty sources was followed by combined uncertainty calculations. The combined uncertainty was compared to the experimentally determined variation and good agreement was found, indicating that the major uncertainty sources had been identified. The results show that the major sources of uncertainty arose from repeatability at high concentration level and volumetric steps at low concentration level, thus revealing the target operations for reducing the measurement uncertainty of this determination. Received: 5 August 2002 Accepted: 5 November 2002 Acknowledgements This research was supported by the Ministry of Education, Science and Sport of the Republic of Slovenia (Project Z2–3530). Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to A. Drolc     

Performance enhancement on mechanical and electrical effects for on-line fiber-optic bending loss measurement

For an automatic testing of the fiber bending loss parameter, we proposed an on-line fiber optic bending loss measurement system. Many impact factors from the supporting systems, free space coupling alignment, external spatial perturbation device and the other automatic testing systems may degrade the on-line fiber-optic bending loss measurement system. We reduce those impact factors and show the mechanical and electrical improvement in this paper. The accuracy can be improved by 3–5 dB for the proposed on-line bending loss measurement system. Development of an on-line fiber-optic bending loss measurement system can provide a fast-checking solution for jump-line quality improvement on fiber-from-the-desk (FFTD) access network.     

FORTRAN语言双精度运算的扩展应用

本文利用ＦＯＲＴＲＡＮ语言中不同类型变量的性质及数运算的特点，讨论了一种能将双精度实数运算扩展到整数运算中的方法，使整数运算也能得到接近双精度实数所具有的有效位数的整型结果。     

影响无网格方法求解精度的因素分析

基于移动最小二乘法的无网格方法的计算精度除受到节点的分布密度和基底函数的阶次影响外，还受到其它因素的影响，其中权函数的选取、权函数影响域的大小及位移边界条件的引入对计算精度影响较大。本文分析了几种常用权函数在数值计算时的特点，包括计算精度、收敛情况、计算效率等，同时分析了影响域大小及边界条件的引入对计算精度的影响。通过分析给出了确定权函数及其影响域大小的方法。当受约束的自由度较多时，通过配点法引入位移边界条件会引起计算结果的振荡，通过施加稳定项可以消除振荡现象，通过对带孔方板的受力分析证明了其可行性。应用以上结论对J23—10曲柄压力机机身进行了受力分析，应力集中部位的计算结果得到了较高的精度。     

基于微机械陀螺的MIMU关键技术

针对基于微机械陀螺的MIMU关键技术，对其进行研究和解决。参加美国JDAM性能指标和导航精度要求，计算陀螺性能参数：采用多级大容量的滤波器及有源电流限制电路，同时电源的输入端接入EMC滤波器，以提高电磁兼容性，并能抵抗浪涌和拉偏的能力；DSP实现信号实时采集，采用高次多项式拟合预处理去除数据野值；根据GJB729评估方法，利用利用蒙特卡罗方法仿真进行精度评估；最后按照GJB813进行可靠性分析。     

Statistical Analysis of the Effect of Intensity Pattern Noise on the Displacement Measurement Precision of Digital Image Correlation Using Self-correlated Images

This paper discusses the effect of intensity pattern noise on the displacement measurement precision of digital image correlation (DIC). Through mathematical deduction, a formula is presented to estimate the displacement measurement error caused by intensity pattern noise. The resulting formula synthetically reflects the effects of the variance of noise, the intensity variance and the subset size on the displacement measurement precision. To verify the correctness of the resulting formula, two experiments are done. The first one is a real self-correlation experiment, and aims to analyze the effect of the subset size, while the second is a numerical self-correlation experiment, and is to analyze to the effect of the different noise levels. The experimental results are in good agreement with the theoretical predictions. The project is supported by the National Science Foundation of China (10572103).     

注塑制品残余应力的研究进展

由于实际工艺条件往往与理想值存在一定偏差,制品在成形后通常会存在一些难以避免的缺陷,而残余应力正是最为常见的一种。注塑制品的残余应力是在注塑成形过程中,外界约束去除后,仍存在于塑件内部的应力,在后期使用过程中容易引起塑件的翘曲、变形、乃至断裂破损,多数情况下对制品不利。因此,在塑料制品设计时应充分考虑到残余应力的影响。本文较为全面地介绍了注塑制品残余应力的产生、检测、减小残余应力的措施及残余应力的计算机模拟等内容。     

基于动态自适应t分布变异的人群搜索算法

针对人群搜索算法在进化后期大量个体聚集局部最优时,易陷入局部最优,搜索精度低的缺陷,提出一种基于t分布变异的人群搜索算法.算法使用动态自适应方式确定变异步长,引入t分布变异算子以融合柯西变异和高斯变异的优点,促进算法在进化早期具备良好的全局探索能力,在进化后期收获较强的局部开发能力,增加种群的多样性;采用边界缓冲墙策略处理越界问题,避免越界个体聚集在边界值上的缺陷.实验结果表明,算法比基本人群搜索算法具有更高的寻优精度和收敛速度,是一种有效的算法.