Detection on micro-Doppler effect based on 1550 nm laser coherent radar

A laser coherent detection system of 1550 nm wavelength was presented, and experimental research on detecting micro-Doppler effect in a dynamic target was developed. In this paper, the return signal in the time domain is decomposed into a set of components in different wavelet-scales by multi-resolution analysis, and the components are associated with the vibrational motions in a target. The micro-Doppler signatures are extracted by applying the reconstruction (inverse wavelet transform). During the course of the final data processing frequency analysis and time–frequency analysis are applied to analyze the vibrational signals and estimate the motion parameters successfully. The experimental results indicate that the micro-Doppler information in a moving can be effectively detected, and tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analysis and time–frequency analysis.     

UV filter 2‐ethylhexyl 4‐methoxycinnamate: a structure,energetic and UV–vis spectral analysis based on density functional theory

2‐Ethylhexyl 4‐methoxycinnamate (EHMC) is a very commonly used UVB filter that is known to isomerize from the (E) to the (Z) isomer in the presence of light. In this study, we have performed high level quantum chemical calculations using density functional theory (DFT) with the B3LYP density functional and extended basis sets to study the gas‐phase molecular structure of EHMC and its energetic stability. Calculations were also performed for related smaller molecules cinnamic acid and 4‐methoxycinnamic acid. Charge delocalization has been analyzed using natural charges and Wiberg bond indexes within the natural bond orbital analysis and using nucleus independent chemical shifts. Density functional theory calculations reveal that the (E) isomer of EHMC is more stable than the (Z) by about 20 kJ mol^?1 in both the gas and aqueous phases. The enthalpy of formation in the gas phase of (E)‐EHMC was derived from an isodesmic bond separation reaction. Long‐range corrected DFT calculations in implicit water were made in order to understand the excited state properties of the (E) and (Z) isomers of EHMC. Copyright © 2013 John Wiley & Sons, Ltd.     

CO2-3掺杂纳米羟基磷灰石晶体的合成与表征

CO2-3掺杂是提高纳米羟基磷灰石（n-HA）生物活性的有效方法之一。以 Ca（NO3）2·4H2O 和Na3PO4·12H2O为主要原料，Na2CO3作为CO2-3来源，合成纳米碳羟基磷灰石（n-CHA）晶体。采用TEM ， XRD ，FTIR ，RS对合成晶体形貌和结构进行表征。结果表明：合成的n-HA晶体长度约为60～80 nm ，宽度在20～30 nm之间，形状为针状，具有良好的结晶度，与自然骨磷灰石形貌相似；n-CHA晶体随CO2-3掺入量的增加，结晶度降低；合成的 n-CHA晶体的晶胞参数 a值随着CO2-3加入量的增大不断收缩，但 c值增大，参数比c/a值增大，符合B型取代（取代PO3-4）的晶胞参数变化规律。红外谱图中，872 cm -1附近出现AB混合型取代（同时取代O H -，PO3-4）的CO2-3面外弯曲振动特征红外峰，同时CO2-3的不对称伸缩振动红外峰在1454和1420 cm -1附近出现分裂峰，1540 cm -1附近出现弱CO2-3峰；1122 cm -1附近出现CO2-3对称伸缩振动拉曼峰，1071 cm -1附近出现CO2-3的B型替代特征拉曼峰，通过计算PO3-4，CO2-3，O H -拉曼峰的积分面积比PO3-4/CO2-3，O H -/CO23，PO3-4/O H -，表明CO2-3在替换时，先以B型为主，随着CO2-3掺入量的增加，发生A型替代（取代O H -）。实验结果表明，合成的磷灰石晶体为B型取代（取代PO3-4）为主的AB混合型取代的 n-CHA。与人骨磷灰石晶体在形态、尺寸、晶体结构和生长方式上具有相似性，可称为类骨磷灰石。     

Raman spectroscopic study on classification of cervical cell specimens

Cervix-cancer is the third most common female cancer worldwide. Papanicolaou (Pap) test, a well-recognized screening tool, is labor intensive, time consuming and prone to subjective interpretations. Optical spectroscopic methods, sensitive to molecular changes are being pursued as potential diagnostics tool. In this study we have explored Raman spectroscopic approach to differentiate exfoliated cell pellets using 94 cervical cell specimens (45-normal and 49-abnormal specimens). Study was carried out by two approaches. In the first approach, spectral data from 37 cell specimens were acquired and analyzed by Principal Component-Linear Discriminant Analysis (PC-LDA), which yielded classification efficiencies of 86% and 84% for normal and abnormal specimens, respectively. Mean and difference spectra suggest presence of blood in abnormal specimen as a major cause of discrimination. However, as tumor is vascular, bleeding was observed during abnormal sample collection. Hence, spectra of abnormal specimens show heme and fibrin features, and this can lead to false interpretations, as bleeding also occur in several non-cancerous conditions. Therefore, remaining 57 specimens were treated with Red Blood Corpuscles (RBC) lysis buffer in order to remove the RBC influence. PC-LDA resulted classification efficiency of about 79% and 78% for normal and abnormal smear, respectively – comparable to Pap test. Thus finding of the study suggests feasibility of Raman spectroscopic classification of normal and cancerous exfoliated cervical cell specimens.     

The effect of porosity on the laser induced damage threshold of TiO2 and ZrO2 single layer films

Monolayer ZrO₂ and TiO₂ films were prepared on BK7 glass by physical vapor deposition (PVD) and were subsequently annealed for 1 h at 300 °C. By using the transmission spectra of two samples and the envelope method, the refractive index dispersion and extinction coefficients have been calculated. Laser induced damage threshold (LIDT) measurement shows that despite slight differences between the extinction coefficients of the two samples, the LIDT parameter of the ZrO₂ film is greater than that of the TiO₂ film. This fact leads us to consider thermal conductivity as an important parameter for interpreting the LIDT difference. According to our theoretical analysis, as a consequence of increase in the number of thermal barriers along poorer film, its thermal conductivity, and hence LIDT, decreased, which is in agreement with our experimental results. The measured porosity of the two samples shows higher porosity for TiO₂ single layer, which is in agreement with atomic force (AFM) images. The gradual and smooth damage morphology of ZrO₂ observed in optical images implies higher thermal conductivity than TiO₂.     

Self-mode locking at multiple Stokes generation in the Raman laser

A self-mode-locking at multiple Stokes generation in Raman lasers is reported. Trains of pulses with durations of down to 50 ps each have been obtained. The reasons for the self-mode-locking have been investigated numerically. Way to the further decreasing of pulse durations was formulated.     

UV spectral characterization of a smectic-C liquid crystal: Theoretical support to the experiment

In the present article, UV spectral characterization of a smectic-C liquid crystal 4,4′-bis(n-alkoxy)azoxybenzene (n = 14) (C₄₀H₆₆N₂O₃) has been carried out. Structure of the molecule has been optimized using the Density functional B3LYP with 6-31+G (d) basis set using crystallographic geometry as input. The absorption spectra have been estimated in the UV region by employing the DFT method, semiempirical CNDO/S and INDO/S parameterizations. The oscillator strength (f) and vertical transition energy (E_V) have been reported corresponding to absorption wavelength (λ_max). These values have been compared with the experimental value reported in the literature to offer theoretical support to the experimental value. Further, some electrochemical properties have been reported for the molecule.     

Effective detection of benzoyl peroxide in flour based on parameter selection of Raman hyperspectral system

Penetration depth and spatial resolution of Raman hyperspectral imaging system were studied for effective detection of benzoyl peroxide in flour. The determinations of parameters were achieved by using the single-band background-correct image of a benzoyl peroxide Raman characteristic band and a simple threshold method. The selected parameters were used to detect mixture samples with different concentrations. Percentage of detected benzoyl peroxide pixels was positively correlated to its concentration. The result shows that parameters selected in this study are effective for the detection of benzoyl peroxide additive in flour and can be used for quantitative analysis in the future.     

Investigation of different liquid media and ablation times on pulsed laser ablation synthesis of aluminum nanoparticles

Aluminum nanoparticles were synthesized by pulsed laser ablation of Al targets in ethanol, acetone, and ethylene glycol. Transmission Electron Microscope (TEM) and Scanning Electron Microscope (SEM) images, Particle size distribution diagram from Laser Particle Size Analyzer (LPSA), UV-visible absorption spectra, and weight changes of targets were used for the characterization and comparison of products. The experiments demonstrated that ablation efficiency in ethylene glycol is too low, in ethanol is higher, and in acetone is highest. Comparison between ethanol and acetone clarified that acetone medium leads to finer nanoparticles (mean diameter of 30 nm) with narrower size distribution (from 10 to 100 nm). However, thin carbon layer coats some of them, which was not observed in ethanol medium. It was also revealed that higher ablation time resulted in higher ablated mass, but lower ablation rate. Finer nanoparticles, moreover, were synthesized in higher ablation times.     

Structural,optical and microwave dielectric properties of Ba1−xSrxWO4 ceramics prepared by solid state reaction route

In this paper, Barium Strontium Tungstate (Ba_1−xSr_x)WO₄ crystals with (x = 0; 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 and 1.0) were prepared by standard wet milling ceramic preparation method. These crystals were structurally characterized by X-ray diffraction (XRD), Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectroscopic techniques. The shape, growth and average crystal size distribution of these crystals were investigated by a scanning electron microscope (SEM). Their optical properties were investigated by ultraviolet visible (UV–vis) absorption and photoluminescence (PL) measurements. XRD patterns, Rietveld refinements data, FT-Raman and FT-IR spectroscopies indicate that all the crystals present a scheelite-type tetragonal structure without deleterious phases. FT-Raman spectra exhibited 6 Raman active modes in range from 100 to 1000 cm⁻¹, while the FT-IR spectra presented 2 infrared active modes in range from 500 to 1000 cm⁻¹. SEM micrographs showed well sintered BaWO₄ grains, while the substitution of Sr induced modifications in the shape and reduction in the grain size. UV–vis absorption measurements evidenced an increase in the values of the optical band gap (from 4.36 to 4.53 eV) with the increase of Sr into BaWO₄ lattice. Dielectric constant, temperature coefficient of resonant frequency (τ_f), quality factors were measured with Hakki–Coleman technique. The value of τ_f found −43.68 ppm/°C for BaWO₄ which increased to −21.40 ppm/°C for the SrWO₄.