Power coupler kick of the TRIUMF ICM capture cavities

The TRIUMF Injector CryoModule (ICM) adapted two superconducting single cavities as the capture section for the low injecting energy of 100 keV electrons. Coupler kick induced beam deflection and projected emittance growth are one of the prime concerns of the beam stability, especially at low energies. In low energy applications, the electron velocity changes rapidly inside the cavity, which makes the numerical analysis much more complicated. The commonly used theoretical formulas of the direct integral or the Panofsky- Wenzel theorem is not suitable for the kick calculation of β <1 electrons. Despite that, the above mentioned kick calculation method doesn't consider injecting electron energy, the beam offset due to the coupler kick may not be negligible because of the low injection energy even if the kick is optimized. Thus the beam dynamics code TRACK is used here for the simulation of the power coupler kick perturbation. The coupler kick can be compensated for by a judicious choice of the coupler position in successive cavities from upstream to downstream. The simulation shows that because of the adiabatic damping by the following superconducting 9-cell cavity, even for the worst orbit distortion case after two capture cavities, the kick is still acceptable at the exit of the ICM after reaching 10 MeV. This paper presents the analysis of the transverse kick and the projected emittance growth induced by the coupler for β <1 electrons. The simulated results of the TRIUMF ICM capture cavities are described and presented.     

基于双芯光纤耦合器的梳状滤波器及其CO2激光调节

基于光纤耦合器的波长特性,分析了光纤耦合器作为梳状滤波器的光谱特性;将长度不同的双芯光纤(twin-core fiber,TCF)熔接在两根单模光纤(single mode fibors,SMF)之间,实验制得具有不同峰值波长间隔的基于双芯光纤耦合器的全光纤型梳状滤波器,其消光比可达25 dB. 首次使用CO₂激光对其进行光谱调节,调节导致光谱向长波方向漂移和消光比的变化. 这种调节是基于CO₂与光纤相互作用时的残余应力释放和熔融变形机理,使用氢载TCF可以在相同实验参数下得到更大的波长调节激光. 关键词： 双芯光纤耦合器 梳状滤波器 2激光')" href="#">CO₂激光 残余应力     

Slow-wave directional coupler and its applications

The directional coupler and the traveling-wave directional filter made of coupled slow-wave microstrip lines are proposed and their characteristics discussed. These structures exhibit interesting characteristics not readily available in conventional transmission lines.This work is supported by U.S. Army Research Office contract DAAG29-84-K-0076.     

Polarisation splitter/combiner based on an antiresonant directional coupler

The theoretical performance of a new polarisation splitter/combiner based on a directional coupler is studied using vectorial mode analysis. The device includes an efficient antiresonant mirror transparent to TM polarisation and opaque to TE polarisation. Simulations indicate a high level of TM light can be transferred from the input waveguide into the non-excited guide for coupling lengths shorter than 1 mm. In addition, coupling efficiency of 80% and extinction ratios close to 30 dB have been obtained in a not optimised device.     

Novel Rat-race Hybrid Coupler for RF Front-end Module

In this paper, a novel compact rat-race hybrid coupler incorporating an improved beeline compact microstrip resonant cell(IB-CMRC) is presented firstly. The size of the coupler is reduced by 46.5% than conventional one due to IB-CMRC’s excellent slow-wave effect. The novel coupler possesses strong ability of high-order harmonic suppression (above 30 dB) in addition. The measured insertion loss is comparable to that of a conventional microstrip hybrid coupler. Great potential applications of this IB-CMRC can be explored in MICs and MMICs to reduce the circuits size, suppress harmonics and improve the overall performance of the RF front-end module.     

宽带光纤耦合器的特性研究

应用局部耦合模理论，对非对称臂宽带光纤耦合器熔锥的形成及耦合发生过程作了较为精确的分析，计算得出了这类耦合器的熔锥特性曲线及光谱特性曲线，本文理论的进一步简化可得到一个特例，它与其它文献所用理论一致     

改进的TESLA式高阶模衰减器的实验研究

讨论了TESLA型高阶模耦合器的改进, 对所设计的改进型TESLA式高阶模耦合器进行实验, 对理论计算与实验结果进行详细分析, 结果表明改进的高阶模耦合器理论计算和实验结果符合得较好.     

一种新型全光纤速度干涉仪

 基于传统速度干涉仪(VISAR)和光纤速度干涉仪(AFVISAR)的特点，提出了一种由光纤和光纤耦合器组成的工作波长为532 nm的新型全光纤速度干涉仪（NAFVISAR）。该干涉仪采用多模光纤器件构成分离系统,单模光纤器件组成核心部分。由于有两路携带不同信息的光束经不同路径传输到耦合器中，当这两路光束满足干涉条件时，可利用它们的干涉场信息来调解出被测靶的信息，从而区分波面的加减速变化。用该系统进行了Hopkinson森杆一维应力加载下的入射杆端面的速度剖面测试，实测速度最大值为49.36 m/s，与理论速度的最大值50.16 m/s基本符合，实现了全光纤速度干涉仪的实用化。     

MM-Wave Band Transversal Filter with Improved Spurious Characteristics

A spurious-suppressed transversal filter using the multiple-coupled line is proposed. The frequency characteristics of the multiple-coupled line are analyzed in detail. In order to compare the performances, the novel spurious-suppressed transversal filter using triple-coupled half-wavelength directional couplers is designed at 30 GHz. The spurious-suppression characteristics of the proposed transversal filter are verified by the full wave analysis and the measurement. The spurious response of the fabricated filter is effectively suppressed and the large attenuation is obtained in the stopband.     

Transmitting spectra-temperature characteristic of single-mode fiber coupler for fiber gyro application

The relationship between the transmitting spectra characteristic of a fused single mode fiber coupler (SMFC) and the performance of interferometric fiber-optic gyroscope (IFOG) is analyzed in theory firstly. Then the transmitting spectra-temperature characteristic of SMFC is experimented, and the influence of the spectrum-stability of the SMFC on IFOG is simulated and experimented. Through the theory analysis and experiment research, it is confirmed that the spectrum output from the SMFC's throughput port is more stable than that output from the coupled port, and the bias instability of the rotation errors induced by the variation of spectrum output from the SMFC's coupled port is 10 times of that output from the throughput port. Therefore, to choose the SMFC's throughput port as the input port for navigation-grade gyroscope is an effective method to improve the IFOG's performance.