稀土化合物在高分子科学中的应用研究进展

综述了稀土化合物在高分子科学中的广泛应用:烯烃聚合/共聚合催化剂、聚氯乙烯的热稳定剂、填充改性聚合物和制备功能材料等,并涉及了笔者在稀土催化接枝改性领域的最新研究成果.     

新型PES微孔材料的制备及性能研究

合成了新型双烯丙基聚醚砜(PES), 采用超临界CO2作为物理发泡试剂制备微孔材料, 研究了不同发泡温度、饱和压力、发泡时间和放气时间等因素对微孔形貌的影响. 结果表明, 发泡温度在110~170 ℃之间, 随着温度的升高, 泡孔直径增加, 泡孔密度在140 ℃达到一个最大值; 随着饱和压力的升高, 泡孔直径减小, 泡孔密度增大; 发泡时间和放气时间对微孔直径和密度影响不大; 研究了在不同辐照剂量下微孔材料的交联性能, 结果表明, 在600 kGy辐照剂量以下, 交联效果不明显, 在800 kGy以上, 随着辐照剂量的增大, 凝胶含量增加, 辐照后的样品在265 ℃热处理10 min, 仍能保持完好的微孔结构.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

A study of carboxylic-modified mesoporous silica in controlled delivery for drug famotidine

A series of pure silica MSU and carboxylic-modified MSU materials were prepared. The formation of mesoporous silica materials with terminal carboxylic groups on pore surface was performed by the acid-catalyzed hydrolysis of cyano to carboxylic. Then their potential applications in controlled drug delivery carriers were investigated. Drug famotidine was selected as a model molecule out of the consideration of the terminal amino groups in its molecule. The adsorption experiments show significant adsorption of famotidine on the carboxylic-modified MSU materials. And, the functionalization level of carboxylic groups has been found to be the key factor affecting the adsorption capacities of the modified MSU materials for famotidine. Subsequently, three kinds of release fluids, including simulated gastric medium, simulated intestinal medium, and simulated body fluid, were used to test the famotidine release rate from the carboxylic-modified MSU material. Obvious delayed effect has been observed for the famotidine release from the carboxylic-modified mesoporous silica material under the in vitro assays.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

一代树状碳硅烷液晶的光化学研究－－端基含12个4－丁氧基氮苯介晶基元

研究了新的含12个丁氧基偶氮苯介晶基元的五代树状碳硅烷液晶D1及偶氮苯介 晶基元化合物M5在氯仿、四氢呋喃、N，N－二甲基甲酰胺、乙醇和苯等溶剂中的量 子产率、反－顺光异构化、光回复异构、反／顺异构组分比、热回复异构及活化能 。D1和M5的光致变色速率常数为10~(-1)s~(-1)，而含同一偶氮基元的光致变色液 晶聚硅氧烷的光致变色速率常数为10~(-8)s~(-1)，因此，液晶树状物D1的光响应 速度比后者快10~7倍。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

Electrochemical characterization of solid materials in volume range I. Chemical effects on the matrix-phase separation

The electrochemical phase isolation (EPI) is described as a preparation method for determining specific precipitations in solid materials in microamounts and microdimensions. Fundamental criteria are examined as a function of the main parameter (polarization current) on the system Fe₃C in a Fe-matrix. The influence of the electrolyte composition on the electrochemical behaviour of the matrix, on the one hand, and of the phase, on the other hand, are investigated and utilized.     

二芳基乙烯类光致变色材料的合成概述

由于具有多种潜在的应用价值, 光致变色化合物作为高级功能材料的研究在国内外广受关注. 在众多的有机光致变色化合物中, 二芳基乙烯特别是二噻吩乙烯, 由于其具有良好的热稳定性和优良的耐疲劳度而成为这类化合物的杰出代表. 近年来, 有关二芳基乙烯类光致变色化合物的各种合成及性能方面的报道已涉及到信息存储、分子开关、逻辑电路、液晶显示、磁性材料等众多领域. 主要是从有机合成的角度, 对这类材料的合成进行了较为全面的概括, 对各种合成方法分别加以介绍和分析, 对其发展趋势予以探索和展望.