混合型间隔层对荧磷混合式白色有机电致发光器件性能的影响

制备了基于新型蓝绿色荧光MQAB与红色磷光Ir(MDQ)2acac的荧磷混合式白色有机电致发光器件,并探讨了TPBI或UGH3两种间隔层及二者的混合间隔层的器件的发光性能.研究发现,采用TPBI和UGH3的混合间隔层可以调控载流子注入与传输的平衡.当m(TPBI)∶ m(UGH3)=1∶1时,可有效地控制发光区域,使得器件性能得到优化,并获得发光亮度高达14 700 cd/m2的白色有机电致发光器件,最高电流效率可达11.60 cd/A,且器件具有较高的色稳定性.采用混合间隔层的器件比单用TPBI或UGH3作为间隔层的器件效率提高了200％ ～ 300％.     

发光层位置对白光有机发光二极管的影响

同一种主体材料MADN中混掺不同的掺杂剂,分别制备了两种白光有机发光二极管,测试并研究了它们的发光效率、寿命、发光亮度、电致发光光谱以及色平衡度。结果表明,两种白光器件的性能受发光层的顺序和厚度的影响显著。发光层顺序由阳极到阴极方向为橙/蓝的器件的稳定性要优于发光层顺序为蓝/橙的器件,这是由于橙光发光层中的rubrene对空穴的陷进作用可捕获穿越橙光发光层中的空穴,从而有效地调控了器件内部的电子、空穴浓度的平衡。通过对器件的优化,制得了色坐标为(0.3201,0.3459)的接近标准白光的有机电致发光器件。     

流场环境下复杂囊泡的动力学行为

采用非平衡态分子动力学方法研究了二维复杂囊泡在剪切流中的动力学行为. 模拟发现了复杂囊泡经典的翻滚(tumbling)、摇摆(trembling)和坦克履(tank-treading)行为, 还观察到由坦克履行为向平动行为(translating)的转变. 囊泡的平动行为与剪切率大小、复杂囊泡的形状密切相关. 当大囊泡均匀嫁接较多数目的小囊泡后, 其平动方式消失. 该研究有益于加深对囊泡在剪切流场中复杂性行为的理解.     

具有P型覆盖层新型超级结横向双扩散功率器件

为了设计功率集成电路所需要的低功耗横向双扩散金属氧化物半导体器件(lateral double-diffused MOSFET), 在已有的N型缓冲层超级结LDMOS(N-buffered-SJ-LDMOS)结构基础上, 提出了一种具有P型覆盖层新型超级结LDMOS结构(P-covered-SJ-LDMOS). 这种结构不但能够消除传统的N沟道SJ-LDMOS由于P型衬底产生的衬底辅助耗尽问题, 使得超级结层的N区和P区的电荷完全补偿, 而且还能利用覆盖层的电荷补偿作用, 提高N型缓冲层浓度, 从而降低了器件的比导通电阻. 利用三维仿真软件ISE分析表明, 在漂移区长度均为10 μm的情况下, P-covered-SJ-LDMOS的比导通电阻较一般SJ-LDMOS结构降低了59%左右, 较文献提出的N型缓冲层 SJ-LDMOS(N-buffered-SJ-LDMOS)结构降低了43%左右.     

Understanding and improving direct UV detection of monosaccharides and disaccharides in free solution capillary electrophoresis

Direct UV detection of carbohydrates in free solution capillary electrophoresis at 270 nm is made possible by a photo-oxidation reaction. Glucose, rhamnose and xylose were shown to have unique UV absorption spectra hypothesizing different UV absorbing intermediates for their respective photo-oxidation. NMR spectroscopy of the photo-oxidation end products proved they consisted of carboxylates and not malondialdehyde as previously theorized and that oxygen thus plays a key role in the photo-oxidation pathway. Adding the photo-initiator Irgacure^® 2959 in the background electrolyte increased sensitivity by 40% at an optimum concentration of 1 × 10⁻⁴ mM and 1 × 10⁻⁸ mM for conventional 50 μm i.d. capillaries and for the corresponding extended light path capillaries, respectively.     

水诱导磷化镍腐蚀及腐蚀抑制

过渡金属磷化物作为助催化剂广泛应用于电催化、光(电)催化、电化学储能等领域,但其在水介质中的稳定性研究较少。我们以磷化镍(Ni_xP)作为研究对象,详细研究了所制备的Ni_xP与水的反应行为。研究结果表明： Ni_xP与水反应生成H₂,同时自身被氧化生成PO₄^3-和Ni²⁺,发生严重的化学腐蚀。腐蚀的程度与Ni_xP的晶体结构、元素比例等因素有关。通过在Ni_xP表面沉积NiO、ZnO、TiO₂保护层可显著抑制Ni_xP的化学腐蚀,提高Ni_xP在水介质中的抗腐蚀能力。     

A two-grid method for elliptic problem with boundary layers

A two-grid method for the elliptic equation with a small parameter ε multiplying the highest derivative is investigated. The difference schemes with the property of ε-uniform convergence on a uniform mesh and on Shishkin mesh are considered. In both cases, a two-grid method for resolving the difference scheme is investigated. A two-grid method has features that are concerned with a uniform convergence of a difference scheme. To increase the accuracy, the Richardson extrapolation in two-grid method is applied. Numerical results are discussed.     

Capillary electrophoresis analysis of inorganic cations in post-blast residue extracts applying a guanidinium-based electrolyte and bilayer-coated capillaries

A new CE method was developed for the identification and quantitation of inorganic cations in post‐blast residues. The simultaneous analysis in 20 min total runtime of eight cations in post‐blast residues (ammonium, potassium, monomethylammonium, calcium, sodium, magnesium, strontium), plus lithium cation as the internal reference, was carried out with a BGE involving a non‐CMR (carcinogenic, mutagenic, and harmful to reproduction) chromophore (guanidinium cation) and a double‐layer modified capillary (hexadimethrine bromide/polyvinylsulfonate). A study of UV detection conditions using guanidinium ion as the probe led us to set the analysis and reference wavelengths and their associated bandwidths as well as the probe concentration fixed at 15 mM. The successive multiple ionic‐polymer layer approach limited the cation adsorption on capillary wall and improved the EOF stability. These caused a significant improvement in method repeatability. Intermediate precisions were 2.4% for corrected areas and 1.3% for normalized migration times. Limits of detection close to 1 mg/L for all cations were obtained. The matrix effects were studied with chemometric approach for different matrices representative of those collected after explosion. Tests with blank matrix extracts of soil, cloth, and with simulated matrix extract containing 800 mg/L Ca²⁺ and 500 mg/L Fe²⁺ were carried out and no significant matrix effects were observed. Finally, analyses of real residues collected after cash dispenser and homemade firework explosions demonstrate excellent correlation between the CE results and those obtained with the ion chromatography method used routinely.     

染料敏化太阳能电池中具有不同电子给体的吩噻嗪类有机光敏染科的理论研究

采用密度泛函理论和含时密度泛函理论方法计算了2个吩噻嗪类染料及其吸附到TiO2上后分子的基态和激发态光物理性质与热力学参数.结果表明,电子给体的改变虽未明显改变染料的光谱性质(垂直跃迁能和振子强度),但可以改变分子的前线轨道能级,进而影响染料分子的激子结合能Eb及激发态电子注入到半导体TiO2中的驱动力△Gint的大小...     

Ordered nano-structure of a stamped self-organized protein layer on a HOPG surface using a HFB carrier

A groundbreaking method for ordered molecular layer preparation on a solid surface employing the drop-stamp method has been developed by us taking advantage of the characteristics of the HFB molecule as a self-organizer/adsorption carrier. It is a smart method which can be used to prepare a self-organized protein layer on a solid surface without unspecific adsorption or defects. In our previous report, we clarified the self-organizing nature of HFB-tagged protein molecules on a surface of a solution droplet. In this report, a protein layer was prepared on a HOPG surface by using the drop-stamp method with a maltose binding protein (MBP)-tagged HFBII molecule. The structure of the stamped protein layer was investigated using frequency modulation atomic force microscopy (FM-AFM) in a liquid condition. The FM-AFM images show that the drop-stamp method can prepare an ordered protein layer on a solid surface smartly. The drop-stamp method using a HFB carrier is a practical method which can be used to prepare an ordered protein layer on a solid substrate surface without unspecific adsorption defects.