二氢吲哚类染料用于染料敏化太阳能电池光敏剂的比较

采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)对四种二氢吲哚染料进行研究, 从中筛选出相对优秀的染料敏化太阳能电池光敏剂. 对前线分子轨道的计算表明, 二氢吲哚染料的前线分子轨道结构非常有利于染料激发态向TiO2电极的电子注入. 对真空中的紫外和可见光吸收光谱的计算表明, 二氢吲哚染料的吸收光谱与太阳辐射光谱匹配较好. 对染料分子的能级计算表明, 二氢吲哚染料的能级结构比较适合于I-/I-3作电解液的TiO2纳米晶太阳能电池的光敏剂. 二氢吲哚染料最低未占据分子轨道(LUMO) 能级均比TiO2晶体导带边能级高, 能够保证激发态染料分子高效地向TiO2电极转移电子. 二氢吲哚染料最高占据分子轨道(HOMO)的能级比I-/I-3能级低, 保证了失去电子的染料分子能够顺利地从电解液中得到电子. 与实验数据比较, 得出在提高染料敏化太阳能电池转换效率方面, 对染料的关键要求是LUMO能级的位置. 染料分子的稳定性是染料敏化太阳能电池使用寿命的关键因素. 通过对化学键键长的比较表明, 二氢吲哚染料的分子稳定性基本相同. 对计算结果的分析表明, 二氢吲哚染料1(ID1)的LUMO能级最高, 分子稳定性最好, 在酒精溶液中的吸收光谱与太阳辐射光谱匹配很好, 在同类染料中是较好的染料敏化太阳能电池光敏剂.     

有机染料敏化剂JK16和JK17的几何结构、电子结构及相关性质

运用密度泛函理论中的杂化泛函B3LYP研究了高效太阳能电池新型染料敏化剂JK16和JK17的几何结构、电子结构、极化率和超极化率, 并用含时密度泛函理论(TDDFT)研究了电子吸收谱. 基于含时密度泛函理论计算结果和实验结果的定性符合, 指认了在可见和近紫外区的吸收属于π→π*跃迁. 计算结果还表明JK16和JK17激发能最低的三个跃迁都与光诱导电荷转移过程有关, 而且二-二甲基芴氨基苯并噻吩基团对光电转换过程的敏化起主要作用, 发生于染料敏化剂JK16、JK17和TiO2界面之间的电荷转移是由染料分子激发态向半导体导带的电子注入过程. 此外, 通过对JK16和JK17的比较, 分析了亚乙烯基对几何结构、电子结构和谱学特性的影响.     

四硫富瓦烯作为染料敏化太阳能电池有机染料电子给体的理论研究(英文)

为了研究四硫富瓦烯(TTF)基团对有机染料敏化剂光电性能的影响,以咔唑染料Dye 1为原型,引入TTF基团作为电子给体,设计了咔唑染料Dye 2.采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别计算模拟了纯染料分子和吸附团簇(TiO2)9后的形貌、分子轨道能级以及紫外-可见吸收光谱,采用周期性密度泛函理论计算模拟染料分子在二氧化钛(101)面吸附的表面形貌.结果发现:在有机染料中引入TTF基团有助于有机染料敏化剂在二氧化钛表面的抗团聚作用和分子内的电荷转移;最为重要的是,TTF基团的强给电子能力极大地增强了有机染料敏化剂的光捕获能力.所有的计算结果表明,TTF基团是一种非常有潜力改善染料敏化剂光电性能的给电子基团.     

有机染料敏化太阳电池中激发态弛豫和电子注入的超快光谱研究

为了实现窄能隙有机光敏剂的理性设计,有必要全面理解发生在二氧化钛/染料/电解质复杂界面的激发态演化动力学。本文通过构建分别以苯并噻二唑-苯甲酸(BTBA)和吡啶并噻二唑-苯甲酸(PTBA)为电子受体的有机给受体染料,借助超快瞬态吸收光谱测量与理论模拟,我们发现在实际的二氧化钛/染料/电解质界面存在激发态多步弛豫与多态电子注入的过程。密度泛函理论及含时密度泛函理论计算表明,二氧化钛表面的光激发产生的"热"激发态染料分子会通过分子片段间的扭转运动发生显著的多步结构弛豫,最终形成共轭骨架具有醌式结构、更加平面化的平衡构型。通过对飞秒瞬态吸收光谱进行目标分析,我们发现相对于以苯并噻二唑-苯甲酸为电子受体的染料,以吡啶并噻二唑-苯甲酸为电子受体的染料呈现出较慢的电子注入速率与较短的激发态寿命,导致总的电子注入产率较低,给出了基于该染料所制备的太阳电池的外量子产率峰值低的原因。     

有机染料敏化太阳电池中激发态弛豫和电子注入的超快光谱研究（英文）

为了实现窄能隙有机光敏剂的理性设计,有必要全面理解发生在二氧化钛/染料/电解质复杂界面的激发态演化动力学。本文通过构建分别以苯并噻二唑-苯甲酸(BTBA)和吡啶并噻二唑-苯甲酸(PTBA)为电子受体的有机给受体染料,借助超快瞬态吸收光谱测量与理论模拟,我们发现在实际的二氧化钛/染料/电解质界面存在激发态多步弛豫与多态电子注入的过程。密度泛函理论及含时密度泛函理论计算表明,二氧化钛表面的光激发产生的"热"激发态染料分子会通过分子片段间的扭转运动发生显著的多步结构弛豫,最终形成共轭骨架具有醌式结构、更加平面化的平衡构型。通过对飞秒瞬态吸收光谱进行目标分析,我们发现相对于以苯并噻二唑-苯甲酸为电子受体的染料,以吡啶并噻二唑-苯甲酸为电子受体的染料呈现出较慢的电子注入速率与较短的激发态寿命,导致总的电子注入产率较低,给出了基于该染料所制备的太阳电池的外量子产率峰值低的原因。     

不对称菁染料敏化纳米TiO2的光生电流过程

用光电化学方法研究了不对称菁类染料敏化TiO2纳米结构电极的光电转换过程.结果表明,该染料的电子激发态能级位置与TiO2纳米粒子导带边位置匹配较好,光激发染料后,其激发态电子可以注入到TiO2纳米多孔膜的导带,从而使TiO2纳米结构电极的吸收光谱和光电流谱红移至可见光区,其 IPCE(Incident photon-to-electron conversion efficiency)值最高可达84.3%.并进一步结合现场紫外-可见吸收光谱研究了外加电势对激发态染料往TiO2纳米多孔膜注入电子过程的影响.     

密度泛函理论研究2种新型染料分子的分子内电荷转移现象

采用量子化学方法研究了2种新型有机染料分子P1和P4,几何优化和基态性质计算采用B3LYP密度泛函,基组为6-311G(d).由于P1和P4分子中分别存在2个对称的吸电子基团,所以2个染料分子的电子结构存在明显的特点:2个紧邻简并最低空轨道(LowestUnoccupied Molecular Orbital,LUMO)轨道.P1和P4最高占据轨道(Highest Occupied Mo-lecular Orbital,HOMO)到LUMO轨道的跃迁能级差分别为2.79和3.26eV.同时,采用含时密度泛函方法(Time-Dependent Density Functional Theory,TDDFT)研究了2个染料分子的激发态性质.通过电荷差异密度理论方法(Charge Different Density,CDD)直观的展示了分子内电荷转移的现象.对于P1,电荷转移的方向是从苯甲酸基团到2个二氰乙烯基噻吩苯基团;对于P4,电荷是由2个二氰乙烯基联苯基团基团向苯甲酸基转移.     

密度泛函理论处理激发态与多重态结构研究进展

用密度泛函理论处理分子激发态和电子多重态结构是密度泛函理论发展的重要方面, 研究工作一直很活跃。本文对近年来在这一领域取得的重要进展作简要的综述。     

银促进的TiO2光催化降解甲基橙

 采用溶胶-凝胶和水热协同法制备了不同Ag含量的负载型Ag-TiO2样品,这些样品具有较大的比表面积和较小的粒径. 适量负载金属银后的TiO2在紫外及可见光下的光催化活性均得到提高. 银在TiO2上的最佳负载量为0.15%, 过高的负载量反而会降低TiO2光催化降解甲基橙的活性. 由于反应机理的不同,银负载对TiO2可见光下催化活性的提高要明显高于对其紫外光下催化活性的提高. 在可见光照射下,从激发态染料注入到TiO2导带的电子迅速转移到了Ag原子簇, Ag原子簇通过促进电荷分离抑制了电子和染料正离子自由基的复合,从而促进了光催化过程. 研究结果表明,有效地促进电荷分离以及激发态电子和氧气分子的反应是提高染料敏化光催化活性的关键.     

染料敏化太阳能电池中二聚噻吩类光敏染料构效关系的理论研究

D-π-A型有机光敏染料结构上的微小差异会引起器件性能的显著不同. 为了合理解释染料分子1和2(给体分别为咔唑和二氢吲哚)结构与性能之间的关系, 采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)讨论了包括紫外-可见吸收光谱、 光捕获效率、 电子注入驱动力、 垂直方向偶极矩和电子转移数目在内的一系列影响染料性能的理论参数. 结果表明, 在光捕获效率和电子注入效率差别不大的情况下, 染料分子2较低的染料再生效率可导致其短路电流较小; 同时, 在由光诱导产生的从染料分子转移到半导体的电子数目以及电子复合程度相差不大的情况下, 染料分子1垂直方向上较大的偶极矩则可导致其具有较高的开路电压. 计算结果与实验值相吻合, 有望对今后设计合成高效光敏染料提供一定的理论指导.     

Substituent Effect on the π Linkers in Triphenylamine Dyes for Sensitized Solar Cells: A DFT/TDDFT Study

A series of metal‐free organic donor–π bridge–acceptor dyes are studied computationally using density functional theory (DFT) and time‐dependent DFT (TDDFT) approaches to explore their potential performances in dye‐sensitized solar cells (DSSCs). Taking triphenylamine (TPA) and cyanoacrylic acid moieties as donor and acceptor units, respectively, the effects of different substituents of the π linkers in the TPA‐based dyes on the energy conversion efficiency of the DSSCs are theoretically evaluated through optimized geometries, charge distributions, electronic structures, simulated absorption spectra, and free energies of injection. The results show that the molecular orbital energy levels and electron‐injection driving forces of the TPA dyes can be tuned by the introduction of substituents with different electron‐withdrawing or ‐donating abilities. The electron‐withdrawing substituent always lowers the energies of both frontier orbitals, while the electron‐donating one heightens them simultaneously. The efficiency trend of these TPA derivatives as sensitizers in DSSCs is also predicted by analyzing the light‐harvesting efficiencies and the free energies of injection. The following substituents are shown to increase the efficiency of the dye: OMe, OEt, OHe, and OH.     

Molecular modeling and photovoltaic applications of porphyrin-based dyes: A review

In this review, the introduction of solar cells is presented. Old and new generation solar cells are briefly described. Quantum dot solar cells (QDSCs), perovskite solar cells, and dye-sensitized solar cells (DSSCs) are concisely introduced. The sensitization mechanism in DSSCs is discussed in detail concerning the spectral and electron injection properties of different dyes. An analysis of the intramolecular charge transfer process in the excited dye molecule is also provided. The use of porphyrin-based dyes as sensitizers in DSSCs is then reviewed. The design, synthesis, and photovoltaic application of a wide variety of porphyrin-based dyes as well as porphyrin dyads are presented and discussed. Theoretical studies of the spectral and electronic properties of different porphyrin-based dyes using DFT and TD-DFT methods are described. The different possibilities for improving the light-to-electrical energy conversion performance are discussed, such as structural modifications through introducing push-pull moieties, which in turn tunes the HOMO-LUMO energy gap of the sensitizing dye used in the DSSC. Experimental, as well as theoretical calculations of adsorption energies of the sensitizing dyes, are crucial for predicting the relative performance and efficiency of the dyes.     

Theoretical investigation of triphenylamine dye/titanium dioxide interface for dye-sensitized solar cells

The structural, electronic and optical features of two metal-free triphenylamine (TPA) organic dyes (namely C206 and C217) before and after binding to a TiO(2) anatase nanoparticle have been investigated in detail, as a model for the corresponding dye-sensitized solar cells (DSSCs). The combination of density functional tight-binding (DFTB), density functional theory (DFT), and time-dependent DFT (TDDFT) approaches are employed. To understand the effects of the linker part in the TPA organic dyes on the energy conversion efficiency of the DSSCs, C217 and C206, which share the same donor and anchor parts but different linker parts, are theoretically evaluated. Our results show that compared with C206 containing just one thienothiophene unit as the linker, for C217 the introduction of one electron-rich 3,4-ethylenedioxythiophene group to the linker part results in stronger couplings with the TiO(2) conduction band and more efficient electron transfer. This difference contributes to the higher efficiency of C217 in DSSCs experiments. This study is expected to assist the molecular design of new and more efficient TPA-based organic dyes for the optimization of the DSSCs.     

Dipolar Compounds Containing Fluorene and a Heteroaromatic Ring as the Conjugating Bridge for High‐Performance Dye‐Sensitized Solar Cells

A novel series of dipolar organic dyes containing diarylamine as the electron donor, 2‐cyanoacrylic acid as the electron acceptor, and fluorene and a heteroaromatic ring as the conjugating bridge have been developed and characterized. These metal‐free dyes exhibited very high molar extinction coefficients in the electronic absorption spectra and have been successfully fabricated as efficient nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). The solar‐energy‐to‐electricity conversion efficiencies of DSSCs ranged from 4.92 to 6.88 %, which reached 68–96 % of a standard device of N719 fabricated and measured under the same conditions. With a TiO₂ film thickness of 6 μm, DSSCs based on these dyes had photocurrents surpassing that of the N719‐based device. DFT computation results on these dyes also provide detailed structural information in connection with their high cell performance.     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

Molecular Design Principle of All‐organic Dyes for Dye‐Sensitized Solar Cells

All‐organic dyes have shown promising potential as an effective sensitizer in dye‐sensitized solar cells (DSSCs). The design concept of all‐organic dyes to improve light‐to‐electric‐energy conversion is discussed based on the absorption, electron injection, dye regeneration, and recombination. How the electron‐donor–acceptor‐type framework can provide better light harvesting through bandgap‐tuning and why proper arrangement of acceptor/anchoring groups within a conjugated dye frame is important in suppressing improper charge recombination in DSSCs are discussed. Separating the electron acceptor from the anchoring unit in the donor–acceptor‐type organic dye would be a promising strategy to reduce recombination and improve photocurrent generation.     

New tetrazole-based organic dyes for dye-sensitized solar cells

A series of new metal-free organic dyes that contain donors with triphenylamine or its derivatives and tetrazole-based acceptors were synthesized and characterized by photophysical, electrochemical, and theoretical computational methods. They were applied in nanocrystalline TiO_2 solar cells(DSSCs). It is found that the introduction of diphenylamine units as antennas in the as-synthesized dyes could improve photovoltaic performance compared with phenothiazine and carbazole units as antennas in DSSCs. The dye with(2H-tetrazol-5-yl) acrylonitrile electron acceptor also displayed the highest solar-to-electrical energy conversion efficiency.     

Structure–Performance Correlations of Organic Dyes with an Electron‐Deficient Diphenylquinoxaline Moiety for Dye‐Sensitized Solar Cells

The high performances of dye‐sensitized solar cells (DSSCs) based on seven new dyes are disclosed. Herein, the synthesis and electrochemical and photophysical properties of a series of intentionally designed dipolar organic dyes and their application in DSSCs are reported. The molecular structures of the seven organic dyes are composed of a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron‐deficient diphenylquinoxaline moiety integrated in the π‐conjugated spacer between the electron donor and acceptor moieties. The DSSCs based on the dye DJ104 gave the best overall cell performance of 8.06 %; the efficiency of the DSSC based on the standard N719 dye under the same experimental conditions was 8.82 %. The spectral coverage of incident photon‐to‐electron conversion efficiencies extends to the onset at the near‐infrared region due to strong internal charge‐transfer transition as well as the effect of electron‐deficient diphenylquinoxaline to lower the energy gap in these organic dyes. A combined tetraphenyl segment as a hydrophobic barrier in these organic dyes effectively slows down the charge recombination from TiO₂ to the electrolyte and boosts the photovoltage, comparable to their Ru^II counterparts. Detailed spectroscopic studies have revealed the dye structure–cell performance correlations, to allow future design of efficient light‐harvesting organic dyes.     

Highly efficient organic indolocarbazole dye in different acceptor units for optoelectronic applications—a first principle study

A series of novel organic dyes (ICZA1, ICZA2, ICZA3, ICZA4) with D-π-A structural configuration incorporating indolo[3,2,1-jk]carbazole moiety as donor (D) unit, thiophene as π-linker and 2-cyanoacrylic acid as acceptor unit were investigated using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. Indolo[3,2,1-jk]carbazole-based D-π-A dyes composed of different acceptor groups were designed. By modulating acceptor unit, the efficiency of D-π-A dye-based dye-sensitized solar cells (DSSCs) can be further improved. In the present work, four novel push-pull organic dyes only differing in electron acceptor, have been designed based on the experimental literature value of IC-2. In order to further improve the light harvesting capability of indolo[3,2,1-jk]carbazole dyes, the acceptor influence on the dye performance were examined. The NLO property of the designed dye molecules can be derived as polarizability and hyperpolarizability. The calculated value of ICZA2 dye is the best candidate for NLO properties. Furthermore, the designed organic dyes exhibit good photovoltaic performance of charge transfer characteristics, driving force of electron injection, dye regeneration, global reactivity, and light harvesting efficiency (LHE). From the calculated value of ICZA4 dye, it has been identified as a good candidate for DSSCs applications. Finally, it is concluded that the both ICZA2 and ICZA4 dyes theoretically agrees well with the experimental value of IC-2 dye. Hence, the dyes ICZA2 and ICZA4 can serve as an excellent electron withdrawing groups for NLO and DSSCs applications.