Optical absorption of zigzag single walled boron nitride nanotubes in axial magnetic field

We have investigated the effect of axial magnetic field on the band structure, dipole matrix elements and absorption spectrum in different energy ranges, using tight binding approximation. It is found that magnetic field breaks the degeneracy in the band structure and creates new allowed transitions in the dipole matrix which leads to creation of new peaks in the absorption spectrum. It is found that, unlike to CNTs which show metallic–semiconductor transition, the BNNTs remain semiconductor in any magnetic field strength. By calculation the diameter dependence of peak positions, we found that the positions of three first peaks in the lower energy region (E <5.3 eV) are proportional to n⁻². In the middle energy region (7 < E < 7.5 eV) all (n, 0) zigzag BNNTs, with even and odd nanotube index, have two distinct peaks in the absence of magnetic field which these peaks may be used to identify zigzag BNNTs from other tube chiralities. For odd (even) tubes, in the middle energy region, applying the magnetic field leads to splitting of these two peaks into three (five) distinct peaks.     

氮化铝纳米锥的低温生长与场发射性能

考察了在600℃以下通过反应AlCl³+NH₃→AlN+3HCl制备AlN纳米锥的规律,结果表明在500℃时仍可获得AlN纳米锥,当温度为480℃时则无氮化物生成。场发射测试显示在500~600℃温区内制得的AlN纳米锥的开启电场处于14.2~20V·μm^-1范围,且随制备温度升高而减小。本工作的结果表明AlN纳米锥可在低温条件下获得,且具有较好的场发射性能。     

2-（5-溴-2-吡啶偶氮）-5-二甲氨基苯胺激光热透镜光谱法测定痕量铑的研究

基于铑(Ⅲ)与2-(5-溴-2-吡啶偶氮)-5-二甲氨基苯胺(5-Br-PADMA)的高灵敏显色反应,建立了激光热透镜光谱法测定痕量铑的新方法。实验表明,在pH 3.6～6.0的HAc-NaAc缓冲介质中,Rh(Ⅲ)与5-Br-PADMA显色形成紫红色铑络合物;继续以1.2 mol/L HClO4酸化后,可转变为另一种具有较高吸收特性的绿蓝色质子化型体,其最大吸收波长位于612 nm处,与所用He-Ne激光器的输出激光波长(632.8 nm)能较好匹配。铑的质量浓度在5～140μg/L范围内与热透镜信号强度呈良好的线性关系,检出限(S/N=3)为1.1μg/L。该方法灵敏度高、选择性好,用于铑炭催化剂中痕量铑的测定,结果满意。     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

Liquid chromatographic resolution of racemic rasagiline and its analogues on a chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

A liquid chromatographic chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid was applied to the resolution of 15 analytes, including racemic rasagiline, a chiral drug for the treatment of Parkinson's disease, and its analogues. The composition of mobile phase was optimized to be ethanol/acetonitrile/acetic acid/triethylamine (80:20:0.2:0.3, v/v/v/v) by evaluating the chromatographic results for the resolution of five selected analytes under various mobile phase conditions. Under the optimized mobile phase conditions, racemic rasagiline was resolved quite well with a separation factor of 1.48 and resolution of 2.71 and its 14 analogues were also resolved reasonably well with separation factors of 1.06–1.54 and resolutions of 0.54–2.11. Among 15 analytes, racemic rasagiline was resolved best except for just one analyte. The analyte structure–enantioselectivity relationship indicated that racemic rasagiline has the most appropriate structural characteristics for resolution on the chiral stationary phase.     

Diketopyrrolopyrrole?Thiophene‐Based Acceptor–Donor–Acceptor Conjugated Materials for High‐Performance Field‐Effect Transistors

We report the synthesis, morphology, and field‐effect‐transistor (FET) characteristics of new acceptor–donor–acceptor conjugated materials that consist of diketopyrrolopyrrole (DPP) acceptor groups and one of four different thiophene moieties, that is, dithiophene (2T), thieno[3,2‐b]‐thiophene (TT), dithieno[3,2‐b:2′,3′‐d]‐thiophene (DTT), and 5,5′′′‐di‐(2‐ethylhexyl)‐[2,3′;5′,2′′;4′′,2′′′]quaterthiophene (4T). The optical band gaps of the as‐prepared materials are smaller than 1.7 eV, which is attributed to the strong intramolecular charge transfer and the backbone coplanarity of the thiophene moieties. The order of both crystallinity and FET mobility (×10^?2–×10^?4 cm² V^?1 s^?1) is TT2DPP > 4T2DPP > 2T2DPP >DTT2DP, which differ in the structure of the π‐conjugated cores and core symmetry. Well‐ordered intermolecular chain packing was confirmed by the GIXD and AFM results. In particular, the FET hole mobility of TT2DPP was further improved to 0.1 cm² V^?1 s^?1, which was attributed to the well‐interconnected structure through solution‐shearing. These experimental results suggest the potential applications of the new DPP? thiophene? DPP conjugated materials for organic electronic devices.     

Dephosphorylation of intact glycoprotein to greatly improve digestion efficiency coupled with matrix-assisted laser desorption/ionization–Fourier transform ion cyclotron resonance mass spectrometric analysis

Sialylation is essential for a variety of cellular functions. Herein, we used bovine fetuin with three potential N-linked glycosylation sites containing complex-type glycan structures, four potential O-linked glycosylation sites and six potential phosphorylation sites as a model compound to develop a highly-efficient digestion strategy for sialylated glycoproteins and efficient enrichment strategy for sialylated glycopeptides using titanium dioxide. The former according to the process of alkaline phosphatase digestion followed by tryptic digestion and then proteinase K digestion could greatly improve the enzymatic efficiency on fetuin, and the latter could obviously enhance the enrichment efficiency for multisialylated glycopeptides using phosphoric acid solution as elution buffer. The mass spectra of the enriched glycopeptides derived from fetuin reveal that several series of the ion clusters with mass difference of 291 Da correspond to the presence of multisialylated glycopeptides. In addition, the approach was applied to characterize the sialylated status of α2-macroglobulin and transferrin, respectively, from the sera of healthy subjects and sex- and age-matched patients with thyroid cancer, and their spectra indicate that the change in the amount of the glycoforms containing different number of sialic acid (SA) residues from one glycosylation site may be used to differentiate between healthy subjects and cancer cases.     

Synthesis and properties of a newly obtained sorbent based on silica gel coated with a polyaniline film as the stationary phase for non-suppressed ion chromatography

The new sorbent for non-suppressed ion chromatography based on silica gel coated with a film of polyaniline (PANI) was obtained in a process of in situ polymerization of aniline by oxidation with ammonium peroxydisulfate. Raman analyses performed using a Thermo Scientific DXR confocal Raman Microscope equipped with the Omnic 8 software from Thermo Fisher Scientific have proved a uniform distribution of PANI on the surface of chromatographic beads and in the pores of the particle.     

Compressed matrix thin film (CMTF)-assisted laser desorption ionization mass spectrometric analysis

The inhomogeneous re-crystallization process of matrix materials is the major concerns associated with matrix assisted laser desorption/ionization (MALDI) analysis. We describe here the approach termed compressed matrix thin film (CMTF) in order to make a uniform matrix deposition. In this approach, solid matrix particles are compressed under 10 MPa of pressure by a compressor that is regularly used in infrared spectroscopic analysis. Then aqueous samples can be deposited on the surface of the matrix film. Major advantages of the CMTF approach are summarized as follows. (1) Reproducible sample preparation procedure. Size and thickness of matrix thin films can be controlled by using a fixed mold.force and known amount of matrix materials. (2) Significantly decreased shot-to-shot variations and enhanced reproducibility. (3) Tolerance for in situ salt washing. Because matrix materials are hydrophobic, salts can be washed away while proteins or peptides are retained on the surface of matrix thin films through hydrophobic interactions. (4) Improved sensitivity. The hydrophobic coating of MALDI sample plate by matrix thin films prevents the spreading of samples across the plate and confines analytes to a small area, leading to increased local concentration. (5) A new means for tissue analysis. Tissue sections can be directly transferred to the uniform surface of matrix materials for reproducible and quantitative comparison of different molecules in different localization. The proposed CMTF should be an enabling technique for mass spectrometric analysis with improved correlations between signal intensities and sample quantities.