应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Plasma-Catalytic Decomposition of Phenols in Atmospheric Pressure Dielectric Barrier Discharge

This study investigated the processes for the destruction of phenol and its derivatives (resorcin and pyrocatechol) in aqueous solutions under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of catalysts in the plasma zone. It was shown that the DBD had a high decomposition efficiency for phenol and its derivatives (up to 99%). Phenol was the most stable and pyrocatechol was the least. In a plasma-catalytic hybrid process, the effective rate constants for phenol, resorcin and pyrocatechol decomposition were 11, 4 and 2.5 times higher, respectively, than those for the DBD treatment without catalysts. The process also resulted in a 1.4, 1.6 and 1.2 times higher rate of carboxylic acid formation for phenol, resorcin and pyrocatechol, respectively. The fractional conversion into the respective carboxylic acids reached 56% for phenol and 68% for resorcin and pyrocatechol.     

A calorimetric study of the glass transition kinetics in polyisoprene

The connection between the dielectric and calorimetric relaxation behaviours of synthetic polyisoprene Cariflex IR 305 is studied. A similar comparison of dielectric and dilatometric results was described in [1]. The heat capacity was measured during heating of samples prepared with different thermal history. Experimental results were compared with the heat capacity curves calculated for a model based on the multiparameter theory of Kovacs et al. [4]. The model considers the relaxation system as being composed of a set of subsystems characterized by different relaxation times. The distribution of relaxation times and their temperature dependence were taken from the diclectric measurement. The relaxation time of a subsystem from posed to depend, not only on the actual, temperature of the sample, but also on the deviation of this subsystem from equilibrium, or alternatively, on the deviation of the system as a whole. The comparison between the measured and modeled curves shows that both influences must be taken into account in order to explain the experimental results.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday.     

Conformational behaviour of 2,2′-bipyrrole

The rotational potential around the interannular bond in 2,2-bipyrrole has been calculated making use of standard minimal STO-3G and split valence 4-31G basis sets. Geometrical optimization concerning the most significant interannular internal parameters has been performed with both basis sets. The trans conformer is predicted to be more stable than the cis. The minimal basis set predicts the existence of a cisoid-gauche minimum which after limited optimization becomes very shallow and it seems to be an artifact of the rigid rotor approximation. At 4-31G level, both the trans and cis conformers represent maxima in the potential curve and two gauche minima appear at =46.0° and =147.6°, the latter being the absolute minimum. The absolute maximum of the potential curve corresponds to the cis conformer.     

Production of N,H, and NH active species in N2-H2 dc flowing discharges

Densities of N, H, and NH active species have been detected by laser-induced fluorescence (LIF) in N₂-xH₂ dc flowing discharges. A peak value of N atom densities far x = 0.2–0.5% and a plateau value of H atom densities between x = 1% and 90% in post-discharge conditions (0.05 sec, p = 2 torr) has been found. Comparison between LIF measurements of N atoms and the trend of the N₂(B, v = II) population shows that the emission from this state can be used for monitoring N atoms. The NH radical has only been detected inside the discharge region.On leave from Instituto Tecnológico de Aeronáutica, CNPq, Brazil.     

CoTiO3纳米粉体的合成及其对MnO2电极材料的改性作用

采用溶胶-凝胶法制得钙钛矿型CoTiO₃纳米粉体，借助XRD、TEM以及循环伏安测试对其性质进行了表征。不同量的所制样品用于MnO₂电极的物理掺杂，进行了深度恒流放电、循环伏安和充放电测试。结果表明在40%KOH电解质溶液中，样品掺杂量为5%时改性效果较好。纳米CoTiO₃参与了电极反应，抑制了电化学惰性物质Mn₃O₄的生成，从而有效地改善MnO₂的放电性能，放电容量较I.C     

Tetrachlorosilane Consumption in Radio Frequency Glow Discharge

Time-resolved mass spectrometry was used for analysis of the plasma reactions in radio frequency (RF) SiCl ₄ and SiCl ₄ –O ₂ discharges as functions of starting partial pressure and electrical power. Molecular concentrations of the reactants and products from SiCl ₄ alone and with O ₂ were obtained from the mass spectra and used for plotting the kinetic curves. The SiCl ₄ and O ₂ consumption rates were calculated from the kinetic curves and compared with results of theoretical simulation of the reaction. Direct electron impact decomposition was found to be the main pathway for pure SiCl ₄ conversion. On the contrary, the consumption of SiCl ₄ in the SiCl ₄ +O ₂ mixtures was largely chemical. The experimental macrokinetics are in agreement with a model in which oxidation is caused by the atomic oxygen.     

丙烯和甲苯的超共轭效应的理论研究

用从头算对丙烯和甲苯2个超共轭体系进行计算,结果表明甲基上氢原子参与超共轭时,其碳氢键键长增大,氢上集居数减少,丙烯、甲苯的甲基旋转势垒为7.61及0.096 kJ/mol.超共轭基作用相当于一带有孤对电子参与共轭之杂原子,超共轭体系不同构型稳定性可用M=sum from i=1 to 3(sinθ_i[sin(θ_i-α)+sinα])来表征。     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.