Imaging Magnetic Domain Structures with Soft X-Ray Microscopy

The current achievements in magnetic transmission soft X-ray microscopy will be reviewed. The magnetic contrast is given by X-ray magnetic circular dichroism (X-MCD), i.e., the dependence of the absorption coefficient of circularly polarized X rays on the projection of the magnetization in a ferromagnetic system onto the photon propagation direction. X-MCD contrast can reach, e.g., at L_2,3 edges in transition metals, large values up to 50%. Combined with a soft X-ray microscope where Fresnel zone plates acting as optical elements provide a lateral resolution down at 25 nm, it allows for imaging magnetic microstructures. Specific features of this photon-based technique are the recording of images in varying external magnetic fields, an inherent chemical specificity, a high sensitivity to thin magnetic layers, due to the large contrast, and the possibility to distinguish between in-plane and out-of plane contributions. In this report, recent results obtained with the XM-1 microscope at the ALS (Berkeley/CA) demonstrate the broad applicability of this novel experimental technique to both fundamental and technological relevant issues in nanomagnetism. The future potential will be briefly outlined.     

Capillary zone electrophoresis of alpha-helical diastereomeric peptide pairs with anionic ion-pairing reagents

The present study uses an unique capillary electrophoresis (CE) approach, that we have termed ion-interaction capillary zone electrophoresis (II-CZE), for the separation of diastereomeric peptide pairs where a single site in the centre of the non-polar face of an 18-residue amphipathic alpha-helical peptide is substituted by the 19 L- or D-amino acids. Through the addition of perfluorinated acids at very high concentrations (up to 400 mM), such concentration levels not having been used previously in chromatography or CE, to the background electrolyte (pH 2.0), we have been able to achieve baseline resolution of all 19 diastereomeric peptide pairs with an uncoated capillary. Since each diastereomeric peptide pair has the same sequence, identical mass-to-charge ratio and identical intrinsic hydrophobicity, such a separation by CZE has previously been considered theoretically impossible. Excellent resolution was achieved due to maximum advantage being taken of even subtle disruption of peptide structure/conformation (due to the presence of D-amino acids) of the non-polar face of the amphipathic alpha-helix and its interaction with the hydrophobic anionic ion-pairing reagents. In addition, due to the excellent resolution of diastereomeric peptide pairs by this novel CZE approach, we have also been able to separate a mixture of these closely-related alpha-helical peptides.     

Physicochemical characterization of phosphinic pseudopeptides by capillary zone electrophoresis in highly acidic background electrolytes

Phosphinic pseudopeptides (i.e., peptide isosteres with one peptide bond replaced by a phosphinic acid moiety) were analyzed and physicochemically characterized by capillary zone electrophoresis in the pH range of 1.1-3.2, employing phosphoric, phosphinic, oxalic and dichloroacetic acids as background electrolyte (BGE) constituents. The acid dissociation constant (pK(a)) of phosphinate group in phosphinic pseudopeptides and ionic mobilities of these analytes were determined from the pH dependence of their effective electrophoretic mobilities corrected to standard temperature and constant ionic strength of the BGEs. It was shown that these corrections are necessary whenever precise mobility data at very low pH are to be determined. Additionally, it was found that the ionic mobilities of the phosphinic pseudopeptides and pK(a) of their phosphinate group are affected by the BGE constituent used. The variability of migration behavior of the pseudopeptides can be attributed to their ion-pairing formation with the BGE components.     

Identification and determination of effective components in Euphrasia regelii by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method has been developed for simultaneous determination of eukovoside, cinnamic acid and ferulic acid in Euphrasia regelii for the first time. The electrophoresis buffer was 20 mmol/L sodium borate containing 10% (v/v) methanol (pH 8.50). The effects of concentration of borate and electrolyte pH on electrophoretic behavior and separation were studied. Regression equations revealed linear relationships (correlation coefficients 0.9995-0.9998) between the peak area of each analyte and the concentration. The levels of analytes in the different parts of Euphrasia regelii were easily determined with recoveries ranging from 95.5 to 104.2%.     

Capillary Zone Electrophoresis of some organic acids in milk whey

This paper describes a method for analysing some acids of milk whey by Capillary Zone Electrophoresis. After eliminating the whey proteins by ultrafiltration, the whey underwent electrophoretic separation in the presence of anodic electroosmotic flow. The following analytes were detected: citric, orotic, uric, and hippuric acids. A procedure is described for sample preparation and the operating conditions for electrophoretic capillary separation established. Finally, orotic acid is quantitatively determined.     

Precision improvement for the analysis of flavonoids in selected Thai plants by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method for the analyses of kaempferol in Centella asiatica and Rosa hybrids and rutin in Chromolaena odorata was developed. The optimization was performed on analyses of flavonoids (e.g., rutin, kaempferol, quercetin, myricetin, and apigenin) and organic carboxylic acids (e.g., ethacrynic acid and xanthene-9-carboxylic acid) by investigation of the effects of types and amounts of organic modifiers, background electrolyte concentrations, temperature, and voltage. Baseline separation (R(s) = 2.83) of the compounds was achieved within 10 min in 20 mM NaH2PO4 - Na2HPO4 (pH 8.0) containing 10% v/v ACN and 6% v/v MeOH using a voltage of 25 kV, a temperature of 30 degrees C, and a detection wavelength set at 220 nm. The application of the corrected migration time (t(c)), using ethacrynic acid as the single marker, was efficient to improve the precision of flavonoid identification (% relative standard deviation (RSD) = 0.65%). The method linearity was excellent (r2 > 0.999) over 50-150 microg/mL. Precision (%RSD < 1.66%) and recoveries were good (> 96% and %RSDs < 1.70%) with detection and quantitation limits of 2.23 and 7.14 microg/mL, respectively. Kaempferol in C. asiatica and R. hybrids was 0.014 g/100 g (%RSD = 0.59%) and 0.044 g/100 g (%RSD = 1.04%), respectively, and rutin in C. odorata was 0.088 g/100 g (%RSD = 0.06%).     

A generic approach to the impurity profiling of drugs using standardised and independent capillary zone electrophoresis methods coupled to electrospray ionisation mass spectrometry

Three standardised, capillary zone electrophoresis-electrospray ionisation mass spectrometry (CZE-ESI-MS) methods were developed for the analysis of six drug candidates and their respective process-related impurities comprising a total of 22 analytes with a range of functional groups and lipophilicities. The selected background electrolyte conditions were found to be: 60/40 v/v 10 mM ammonium formate pH 3.5/organic, 60/40 v/v 10 mM ammonium acetate pH 7.0/organic and 10 mM piperidine, pH 10.5, where the organic solvent is 50/50 v/v methanol/acetonitrile. The coaxial sheath flow consisted of either 0.1% v/v formic acid in 50/50 v/v methanol/water, or 10 mM ammonium acetate in 50/50 v/v methanol/water, depending on the mixture being analysed. Factor analysis and informational theory were used to quantify the orthogonality of the methods and predict their complementarities. The three selected CZE-ESI-MS methods allowed the identification of 21 out of 22 of all the drug candidates and their process-related impurities and provided orthogonality with four established high-performance liquid chromatography-mass spectrometry (HPLC-MS) methods. These methodologies therefore form the basis of a generic approach to impurity profiling of pharmaceutical drug candidates and can be applied with little or no analytical method development, thereby offering significant resource and time savings.     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验，用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin，被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下，酸性多肽几乎没有吸附，少量的碱性多肽有吸附。在pH=6的条件下，碱性多肽具有非常强的吸附从而导致非常差的分离效果，在pH=2.3的条件下，5种多肽都能被很好地分离，由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH，电渗流消失。对具有一定分析化学基础理论知识的学生而言，这是一个非常好的生物分析实验，有助于学生充分理解相关环境因素对仪器分析的重要影响。     

Field Study on Mobility and Persistence of Linuron and Monolinuron in Agricultural Soil

Abstract

A field site equipped with suction cup lysimeters was installed at Treviglio (BG) to assess the migration capacity of the herbicides linuron and monolinuron from topsoil to groundwater and to verify the appearance of their relevant transformation products in soil and water samples. A constant hydraulic head was applied in order to develop water saturation conditions in the upper layers. KCl was used as a tracer to evaluate water infiltration velocity through the vertical soil profile. The constant hydraulic head accelerated infiltration rates, while herbicide concentrations reached maximum contamination because soil adsorption capacity was underdeveloped. The results indicated two main processes of pesticide transport: firstly transport due mainly to water infiltration through macropores; secondly the transport driven by matrix flow. Linuron was found to be the most mobile herbicide, while chloroanilines were found to be the major transformation products of the herbicides considered.     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384