输入输出共轴的三弯曲型TM01-TE11模式转换器

 通过采用相位重匹配技术，设计了一种输入输出共轴的三弯曲型TM₀₁-TE₁₁模式转换器，该转换器由三段常曲率弯曲波导和两段直波导组成。用模式耦合理论建立了该类模式转换器的数值计算和优化设计方法，并设计了一个中心频率为7.0 GHz的模式转换器。该转换器的TM₀₁-TE₁₁转换效率在中心频率上大于99％，在6.5~7.5 GHz的频率范围内大于90％。应用时域有限差分法和有限元方法对所设计的模式转换器进行了仿真，仿真结果验证了设计理论和设计结果。     

双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

双包层椭圆光波导解析解

解析求解了双包层椭圆光纤中的波动方程，得到了模式精确解有模式特征方程。对基模的特征方程进行了数值计算，给出了不同椭圆比下的归一化双折射和模间色散随归一化频率的变化关系曲线，并与高斯近似解的结果进行了比较。     

沿非线性界面传输的TM波传播常数的解析解

本文得到了沿一线性介质与非线性介质界面传输的ＴＭ波精确的色散关系和传播常数的解析计算公式，导出了计算非线性介质中传输功率流的积分公式。本文方法计算传播常数及功率流的优点是可不必先知道电场分布。     

Analysis of Radiation Phenomena in a Wedge Ended Dielectric Slab Waveguide

Radiation phenomena observed in a wedge shape ended dielectric slab waveguide are analyzed using mode matching technique. The case of transverse electric polarization (TE) being parallel to dielectric slab waveguide is assumed. In order to describe the fields in the wedge region, a stack of dielectric plates is assumed and in each layer the fields are expanded in terms of the mixed spectrum of guided and radiated modes. A similar expansion is used in the constant thickness slab waveguide while in free space medium a continuous-radiation mode expansion is used. Then a mode matching approach is applied, incorporating the orthogonality properties of mixed spectrum modes, in order to compute the wave fields inside the dielectric slab waveguide and wedge medium. Mode matching is achieved by discretizing the continuous radiation mode spectrum leading into a numerically stable solution provided a sufficient large number of points are used to convert integrals into finite summations. Numerical computations are carried out for various wedge geometries and shapes including linear and exponential profiles.     

介质光波导的数值计算及近似方法

综述介质光波导中模式分析方法的最新进展。着重分析严格的数值分析方法及近似方法最近的研究进展。依据方法的计算精确度、计算效率和计算复杂度等因素．对有限元法和有限差分法这两种数值分析方法以及有效指数法和频谱指数法等近似方法进行讨论。论述磁光波导的分析方法。     

Dispersion Characteristics of Waveguide Arrays in Optical Spectrum Analyzers

Formulas for calculating the spectral characteristics of waveguide arrays, which are incorporated into waveguide spectrum analyzers based on planar waveguides, channel waveguides, and fiber optical waveguides, are derived taking into account the contribution of both the waveguide dispersion and the material dispersion to the dispersion factor. These formulas are used to study the dependence of the dispersion factor on the waveguide-system parameters for specific models of waveguide arrays. It is shown that consideration of contributions of the waveguide dispersion and material dispersion can affect profoundly the spectral characteristics of waveguide arrays.     

A DC excited waveguide multibeam CO2 laser using high frequency pre-ionization technique

High power industrial multibeam CO₂ lasers consist of a large number of closely packed parallel glass discharge tubes sharing a common plane parallel resonator. Every discharge tube forms an independent resonator. When discharge tubes of smaller diameter are used and the Fresnel numberN ≪ 1 for all resonators, they operate in waveguide mode. Waveguide modes have excellent discrimination of higher order modes. A DC excited waveguide multibeam CO₂ laser is reported having six glass discharge tubes. Simultaneous excitation of DC discharge in all sections is achieved by producing pre-ionization using an auxiliary high frequency pulsed discharge along with its other advantages. Maximum 170 W output power is obtained with all beams operating in EH₁₁ waveguide mode. The specific power of 28 W/m is much higher as compared to similar AC excited waveguide multibeam CO₂ lasers. Theoretical analysis shows that all resonators of this laser will support only EH₁₁ mode. This laser is successfully used for woodcutting     

基于有限差分光束传播法的过渡波导功耗分析

为了在既定尺寸下减小斜坡波导和弯曲波导的功耗，设计了4种过渡波导形状函数。用有限差分光束传播法(FD-BPM)进行了模拟分析，发现过渡波导形状的选取与坡度和曲折角存在条件有关，并给出了条件表达式及其详细说明。     

PECVDSiON薄膜的工艺控制,性质及其潜在应用

研究了等离子增强化学气相淀积氮氧化硅薄膜的工艺控制、性质以及薄膜波导在超大规模集成电路光互连中的潜在应用。