Mixed Fano-SP resonant absorption of THz electromagnetic waves in a photonic resonator contacting with a metal film

In terahertz frequency region, we have investigated theoretically the correlation between spectra of a free photonic structure and that deposited on a metal for several models of metal. It was found that for quasi-normal incidence of p-polarized electromagnetic field the presence of metal generates narrow spectral wells in the middle of reflection windows existing in a free photonic crystal. Quite another manifestation of metal-resonator inter-influence takes place at incident angles exceeding the Brewster angle when reflection spikes coincide with modes of photonic crystal resonator and they are absent throughout the stopband areas. The effects are strongly depended on polarization, number of periods and angle of incidence.     

Study of electron-vibrational interaction and concentration quenching effect of Cu+ ions in lithium based sulphate phosphors

The objective of this work is to study electron-vibrational interaction (EVI) and concentration quenching and their manifestation in experimental photoluminescence spectra of Cu⁺ ion in various lithium based phosphors namely, Li₂SO₄, LiNaSO₄ and LiKSO₄. The main parameters of EVI, such as the Stokes shift, Huang-Rhys factor and zero-phonon line positions, were estimated. The studied systems shows strong electron lattice coupling. The validity of results was established by modeling the shape of the emission spectra, which was found to be in good agreement with experimental photoluminescence spectra. The concentration quenching study is also carried out for these compounds. The studied systems correspond to the nearest neighbor energy transfer mechanism.     

Synthesis of cysteamine-coated CdTe quantum dots and its application in mercury (II) detection

High-quality cysteamine-coated CdTe quantum dots (CA-CdTe QDs) were successfully synthesized in aqueous phase by a facile one-pot method. Through hydroxylamine hydrochloride-promoted kinetic growth strategy, water-soluble CA-CdTe QDs could be obtained conveniently in a conical flask by a stepwise addition of raw materials. The photoluminescence quantum yield (PL QY) of the obtained QDs reached 9.2% at the emission peak of 520 nm. The optical property and the morphology of the QDs were characterized by UV–vis absorption spectra, photoluminescence spectra (PL) and transmission electron microscopy (TEM) respectively. Furthermore, the fluorescence of the resultant QDs was quenched by copper (II) (Cu²⁺) and mercury (II) (Hg²⁺) meanwhile. It is worthy of note that to separately detect Hg²⁺, cyanide ion could be used to eliminate the interference of Cu²⁺. Under the optimal conditions, the response was linearly proportional to the logarithm of Hg²⁺ concentration over the range of 0.08–3.33 μM with a limit of detection (LOD) of 0.07 μM.     

Photophysics of Silicon Phthalocyanines in Aqueous Media

Phthalocyanines have been used as photodynamic therapy (PDT) agents because of their uniquely favorable optical properties and high photostability. They have been shown to be highly successful for the treatment of cancer through efficient singlet‐oxygen (¹O₂) production. However, due to their hydrophobic properties, the considerations of solubility and cellular location have made understanding their photophysics in vitro and in vivo difficult. Indeed, many quantitative assessments of PDT reagents are undertaken in purely organic solvents, presenting challenges for interpreting observations during practical application in vivo. With steady‐state and time‐resolved laser spectroscopy, we show that for axial ligated silicon phthalocyanines in aqueous media, both the water:lipophile ratio and the pH have drastic effects on their photophysics, and ultimately dictate their functionality as PDT drugs. We suggest that considering the presented photophysics for PDT drugs in aqueous solutions leads to guidelines for a next generation of even more potent PDT agents.     

基于[LnMo12]二十面体的三维稀土钼酸盐骨架的合成、结构及荧光性能

通过缓慢蒸发溶剂法合成了2例新的三维稀土钼酸盐：[Ln (H₂O)₃]₃[LnMo₁₂O₄₂]·xH₂O,其中Ln=Eu (1)、Tb (2),x=7(1),10.17(2)。这2种稀土钼酸盐中都含有新颖的二十面体[LnMo₁₂O₄₂]构建单元,该单元通过与{LnO₉}多面体进一步连接形成三维网络。光致发光测试表明,化合物1和2显示出明显不同的发射特征,这与Eu³⁺和Tb³⁺离子的不同能级跃迁密切相关。化合物1表现出较强的红色发射(CIE色度坐标为(0.66,0.33))、高发光强度、较大的荧光量子产率(约60%),对应于从⁵D0到⁷F_J (J=4、3、2、1、0)的跃迁;化合物2表现出浅绿色发射(CIE色度坐标为(0.34,0.60)),对应从⁵D₄到⁷F_J (J=6、5、4、3)的能级跃迁,其发光强度较弱和荧光量子产率较低(约20%)。有趣的是,一定量的Tb³⁺引入和大量溶剂分子的存在导致化合物2发生部分荧光猝灭,但对化合物1的荧光几乎没有影响。     

Droplet-based microfluidics for dose–response assay of enzyme inhibitors by electrochemical method

A simple but robust droplet-based microfluidic system was developed for dose–response enzyme inhibition assay by combining concentration gradient generation method with electrochemical detection method. A slotted-vials array and a tapered tip capillary were used for reagents introduction and concentration gradient generation, and a polydimethylsiloxane (PDMS) microfluidic chip integrated with microelectrodes was used for droplet generation and electrochemical detection. Effects of oil flow rate and surfactant on electrochemical sensing were investigated. This system was validated by measuring dose–response curves of three types of acetylcholinesterase (AChE) inhibitors, including carbamate pesticide, organophosphorus pesticide, and therapeutic drugs regulating Alzheimer's disease. Carbaryl, chlorpyrifos, and tacrine were used as model analytes, respectively, and their IC₅₀ (half maximal inhibitory concentration) values were determined. A whole enzyme inhibition assay was completed in 6 min, and the total consumption of reagents was less than 5 μL. This microfluidic system is applicable to many biochemical reactions, such as drug screening and kinetic studies, as long as one of the reactants or products is electrochemically active.     

Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

Study on the Interaction Between Bovine Serum Albumin and Potassium Perfluoro Octane Sulfonate

The interactions between potassium perfluorooctanesulfonate (PFOS) and bovine serum albumin (BSA) were studied by fluorescence spectroscopy. The association constants between PFOS and BSA were obtained by fluorescence enhancing and fluorescence quenching respectively. Furthermore, fluorescence quenching was studied at different temperatures, and the binding constant was also determined by the method of fluorescence quenching. According to the thermodynamic parameters, the main binding force could be judged. The experimental results revealed that BSA and PFOS had strong interactions. The mechanism of quenching belonged to dynamic quenching and the main sort of binding force was hydrophobic force. IR-spectra proved the interaction changed the conformation of BSA.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.