Crystal Structures and Magnetic Properties of the Two Misfit Layer Compounds: [SrGd0.5S1.5]1.16 NbS2 and [Sr(Fe,Nb)0.5S1.5]1.13 NbS2

Crystal structures of two new misfit compounds, [SrGd_0.5S_1.5]_1.16NbS₂ and [Sr(Fe,Nb)_0.5S_1.5]_1.13NbS₂, were determined through the composite approach, i.e., by refining each subpart (Q, H-parts, and the common part) of these composite materials, separately. The Q-part is a three-atom-thick layer, with the NaCl-type structure, where external SrS planes enclose the inner GdS or (Fe,Nb)S plane; the structural difference between these two compounds lies in the central layer within the Q-part: Gd and S atoms are in special positions (octahedral coordination), while Fe and S atoms are statistically distributed on split (×4) positions (tetrahedral coordination) around a central unique site (=special position occupied by Nb). The H-part is a sandwich of sulfur planes enclosing the inner Nb plane as observed for the structure of the binary compound NbS₂ itself. The Sr-Gd derivative shows a paramagnetic behavior in the whole studied temperature range (2-300 K). On the other hand, antiferromagnetic interactions occur in the Sr-Fe derivative; the complex magnetic behavior of this compound is related to the statistical distribution of Fe atoms which leads to frustration of the magnetic interactions. At room temperature, experimental values obtained from Mössbauer spectrum correspond to Fe³⁺ in tetrahedral sulfur environment: isomer shift δ=0.32 mm s⁻¹, and quadrupole splitting ΔE=0.48 mm s⁻¹.     

Oxidation of methyl phenyl sulfide with hydrogen peroxide catalyzed by Ti(IV)-substituted heteropolytungstate

Alkylammonium salts of Ti(IV)-substituted heteropolytungstate, PW₁₁TiO ₁₀ ⁵⁻ , catalyze the oxidation of methyl phenyl sulfide with hydrogen peroxide. The yield of the corresponding sulfoxide and sulfone is practically quantitative. A³¹P NMR study confirms the formation and reactivity of the PW₁₁O₃₉TiO ₂ ⁵⁻ peroxo complex in organic media.     

ZnS胶体溶液中某些无机盐光化学过程中产生的阴离子自由基的ESR研究

本文用自旋捕捉与ＥＳＲ技术相结合的方法研究了ＺｎＳ胶体溶液中某些无机盐光化学过程中产生的无机阴离子自由基，并对自由基产生的机理进行了讨论     

Photocatalytic Organic Syntheses: Selective Cyclization of Amino Acids in Aqueous Suspensions

Photocatalytic reactions occurring at semiconductor particles/solution interfaces can be applied to organic syntheses. In this review article, examples of photocatalytic syntheses of cyclic amino acids by suspended semiconductor particles, e.g., titanium(IV) oxide or cadmium(II) sulfide are introduced and interpreted. Different from the photocatalytic decomposition of pollutants under aerobic conditions, selective conversion of organic compounds can be driven by the photocatalytic reactions under deaerated conditions.     

Tandem reactions of α-diazo ketones with macrocyclic olefins: diastereoselective synthesis of oxanorbornane fused macrocyclic lactones

Tandem cyclization-cycloaddition reactions of α-diazo ketones with macrocyclic olefins in the presence of rhodium(II) acetate catalyst led to the oxanorbornane fused macrocyclic di- or tetralactone ring systems in moderate yield. This forms the first example of 1,3-dipolar cycloaddition reactions with a macrocyclic olefin as a dipolarophile, affording a variety of new oxanorbornane fused macrocycles with diastereoselectivity.     

Facile protection of carbonyl compounds as oxathiolanes and transoxathioacetalization of oxyacetals promoted by iron(III) trifluoroacetate or trifluoromethanesulfonate as chemoselective and recyclable catalysts

Oxathioacetalization of carbonyl compounds and transoxathioacetalization of O,O-acetals/ketals are reported under nearly neutral conditions promoted by iron(III) trifluoroacetate [Fe(CF₃CO₂)₃] or trifluoromethanesulfonate [Fe(CF₃SO₃)₃] as recyclable and highly efficient Lewis acid catalysts.     

Ein neues Samariumnitridsulfid: Sm4N2S3

A New Samarium Nitride Sulfide: Sm₄N₂S₃ The oxidation of samarium with sulfur in the presence of SmCl₃ and NaN₃ as nitrogen source (molar ratio: 12:9:4:2, evacuated silica vessel, some NaCl as flux, 850°C, 7 d) yields Sm₄N₂S₃ as lath-shaped, dark red single crystals. The by-products (NaCl and NaSm₂Cl₆) are rinsed with water from the crude product. The crystal structure of Sm₄N₂S₃ (monoclinic, C2/m (no. 12), Z = 2, a = 1 318.04(12), b = 391.57(2), c = 1 031.76(9) pm, β = 130.874(6)°, R = 0.036, R_w = 0.031) contains two crystallographically different Sm³⁺, both in sixfold coordination of the anions. Besides distorted octahedra [(Sm1)N₃S₃] and [(Sm2)NS₅], tetrahedra [(N^3?)(Sm)] connected via two cis-oriented edges to form chains [N(Sm1)_3/3(Sm2)_1/1]³⁺ build up the Mayn structural feature. These are arranged in the fashion of a closest packing of rods and held together by two crystallographically different S^2? anions which take care for charge neutrality and three-dimensional interconnection.     

Chalkogenid-Disilicate der Lanthanoide vom Typ M4X3[Si2O7] (M  Ce?Er; X  S,Se)

M₄X₃[Si₂O₇]-Type Lanthanide Chalcogenide Disilicates (M ? Ce? Er; X ? S, Se) Attempts to produce single crystals of MSe₂ (or MSe^2?X) by vapour phase transport with iodine or the oxidation of MCl₂ (or MClH) with sulfur in the presence of NaCl in sealed evacuated quartz containers often yielded well-grown single crystals with the composition M₄X₃[Si₂O₇] (M ? pr, Sm, Gd, X ? Se, and M ? Nd, Er, X ? S) as by-products. The crystal structures (tetragonal, 14₁/amd (no. 141)), Z = 8, contain two crystallographically independent M₃₊ Cations that are interconnected by chalcogenide (X_2?) and disilicate anions ([Si₂O₇]^6?). (M1)³⁺ is surrounded by eight (five X^2? and three terminal O_2? of the disilicate group), (M2)³⁺ by nine (three X^2? and six terminal O^2? of the [Si₂O₇]_6? anion) chalcogenide anions. The disilicate anion itself exhibits the eclipsed conformation with non-linear Si? O? Si bridges (angles: 128 – 133°).     

Fluoride-induced nucleophilic (phenylthio)difluoromethylation of carbonyl compounds with [difluoro(phenylthio)methyl]trimethylsilane (TMS-CF2SPh)

A fluoride-induced nucleophilic (phenylthio)difluoromethylation method using TMS-CF₂SPh has been achieved. This new methodology efficiently transfers “PhSCF₂” group into both enolizable and non-enolizable aldehydes and ketones to give corresponding (phenylthio)difluoromethylated alcohols in good to excellent yields. Diphenyldisulfide can also be (phenylthio)difluoromethylated into PhSCF₂SPh in high yield. The reaction with methyl benzoate, however, gives only low yield of (phenylthio)difluoromethyl phenyl ketone. The above-obtained PhSCF₂-containing alcohols can be further transformed into difluoromethyl alcohols using an oxidation-desulfonylation procedure. This new type of nucleophilic (phenylthio)difluoromethylation methodology may have other potential applications in the medicinal and agrochemical fields.     

Molecular structure of (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide. Synthesis of (3,5-diallylisocyanuratomethyl)phosphine sulfides

X-Ray study of the (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide showed that the phosphorylmethyl group is bonded to the nitrogen atom of the cycle. Reaction of the tris(chloromethyl)phosphine sulfide with sodium diallylisocyanurate gave (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide, and treatment of the tris(3,5-diallylisocyanuratomethyl)phosphine oxide with phosphorus pentasulfide gave a tris(3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1446–1448, August, 1993.