Non-destructive in situ determination of pigments in 15th century wall paintings by Raman microscopy

Raman microscopy has been applied to the study of 15th century wall paintings in a chapel of St. Orso Priory palace (Aosta, Italy) in view of their restoration. The use of a transportable instrument has made it possible to work non-destructively in situ without sampling. The main inorganic pigments used by the unknown artist, namely mercury sulphide, azurite, white lead, red and yellow ochre, carbon black and lead tin yellow type I have been identified, and the presence of organic substances and of some decay products (calcium sulphate and oxalate) has been observed.     

Diffusion-averaged molecular weights of «nonboiling» crude oil fractions

Summary The successful application of the formerly presented concept of diffusion-averaged molecular weight, M_d, to vacuum residues of crude oils, or their fractions, is described. The samples for establishing the calibration curve, logDvs. logM, were crude oil fractions with polydispersities smaller than 1.1. In a surprisingly good approximation the calibration curve is independent of the origin of these fractions if 500<M<10000. The validity of our calibration curve was demonstrated with more than 10 crude oil residues and with some of their hydrogenation residues [2].     

A simple polymer electrolyte membrane system for enrichment of low-level tritium (3H) in environmental water samples

Tritium (³H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of ³H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich ³H in 250–3000?mL environmental water samples to a 10-mL final volume. The IAEA PEM-³H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional ³H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show ³H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ～4.5?%. Further work is needed to quantify inter-sample memory and to establish lower ³H detection limits. The IAEA PEM-³H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.     

A Repaid Procedure for Preparing Oxyen-18 Determination in Water Samples

An equipment for the speed δ¹⁸O analysis of water samples is described. It used the equilibrium isotopic exchange reaction between water and CO₂ gas. Outgasing of samples through capillary without freezing down the samples, together with shaking during the equilibrium time, reduced considerably time for sample preparation.

Apparatus is air termostated with hand valves. Measured δ values are not very sensitive to precision of preparation work and reaction conditions, except of temperature. With good temperature control the standard reproducibility of single measurement is better than 0,1‰     

船载特种设备基点轨迹测量的误差分析

对船载特种设备基准点的空间位置进行测量,得到该基准点的运动轨迹并进行测量误差分析,是某项工程数据处理的重要内容.提出了利用三台船载GPS接收机测量船载特种设备基准点的原理和误差分析方法,介绍了该方法的误差源构成,依据测量原理模型,推导出定位精度的估算公式,并叙述了仿真计算与测量实施.     

Online induction heating for determination of isotope composition of woody stem water with laser spectrometry: a methods assessment

Application of stable isotopes of water to studies of plant–soil interactions often requires a substantial preparatory step of extracting water from samples without fractionating isotopes. Online heating is an emerging approach for this need, but is relatively untested and major questions of how to best deliver standards and assess interference by organics have not been evaluated. We examined these issues in our application of measuring woody stem xylem of sagebrush using a Picarro laser spectrometer with online induction heating. We determined (1) effects of cryogenic compared to induction-heating extraction, (2) effects of delivery of standards on filter media compared to on woody stem sections, and (3) spectral interference from organic compounds for these approaches (and developed a technique to do so). Our results suggest that matching sample and standard media improves accuracy, but that isotopic values differ with the extraction method in ways that are not due to spectral interference from organics.     

食品药品检验机构仪器设备计量信息的标准化管理

建立食品药品检验机构仪器设备计量的信息化规范管理方法。总结了传统人工计量管理的弊端,提出计量信息化管理的流程,将计量信息化管理分为计量计划申报、计量应急申报、计量信息登记、计量结果确认4个步骤,详细介绍了4个步骤中信息管理的主要内容及注意事项。建立食品药品检验机构仪器设备计量信息化管理的标准化规程,可以为仪器设备计量信息的动态监管提供支持。     

An axial flow cyclone to remove nanoparticles at low pressure conditions

In this study, the axial flow cyclone used in Tsai et al. (2004) was further tested for the collection efficiency of both solid (NaCl) and liquid (OA, oleic acid) nanoparticles. The results showed that the smallest cutoff aerodynamic diameters achieved for OA and NaCl nanoparticles were 21.7 nm (cyclone inlet pressure: 4.3 Torr, flow rate: 0.351 slpm) and 21.2 nm (5.4 Torr, 0.454 slpm), respectively. The collection efficiencies for NaCl and OA particles were close to each other for the aerodynamic diameter ranging from 25 to 180 nm indicating there was almost no solid particle bounce in the cyclone. The 3-D numerical simulation was conducted to calculate the flow field in the cyclone and the flow was found to be nearly paraboloid. Numerical simulation of the particle collection efficiency based on the paraboloid flow assumption showed that the collection efficiency was in good agreement with the experimental data with less than 15% of error. A semi-empirical equation for predicting the cutoff aerodynamic diameter at different inlet pressures and flow rates was also obtained. The semi-empirical equation is able to predict the cutoff aerodynamic diameter accurately within 9% of error. From the empirical cutoff aerodynamic diameter, a semi-empirical square root of the cutoff Stokes number, , was calculated and found to be a constant value of 0.241. This value is useful to the design of the cyclone operating in vacuum to remove nanoparticles.     

基于RST-QFD-Bayes的新型装甲装备通用质量特性评价指标体系构建研究

针对新型装甲装备通用质量特性评价指标体系难以确定的问题,在明确评价指标体系构建原则的基础上,结合新型装甲装备特点,确定了通用质量特性初始评价指标及指标筛选要求,运用QFD将新型装甲装备通用质量特性需求映射为评价指标筛选要求,采用粗糙集理论(Rough Set Theory,RST)确定了指标筛选重要度,考虑到关联度的不确定性及多个专家估计值的平均值和估计值的波动程度,将贝叶斯理论引入关系矩阵的确定中,用区间数确定了关联度,进行了评价指标筛选,构建了新型装甲装备通用质量特性评价指标体系,为新型装甲装备通用质量特性评价奠定了基础。     

现场侦检装备在应对化学威胁中的应用与发展

近年来,国内外不断发生的化学恐怖袭击和化学事故仍然是当今人类生存、国家安全所面临的重大威胁。化学侦检是防化应急处置与救援的眼睛,熟练掌握和正确使用侦检装备是应对化学威胁、降低损失和伤亡的关键因素。基于化学传感等技术的侦检装备具有响应快速、智能便携的特点,并且在远程监测和实时值守等方面具有优势。该文针对涵盖电化学传感器、质量敏感型传感器、红外传感器、拉曼传感器、离子迁移谱仪、火焰光度检测器、光致电离检测器、远程遥测传感装备等在内的现场侦检装备,从原理、性能、优势和不足等方面进行了概述,重点阐述了侦检装备在应对化学威胁方面的最新进展,并对其发展趋势、应用前景进行了展望,以期为化学侦检装备在应对化学威胁中的深入研究与应用提供参考。