Imaging anisotropic elastic properties of an orthotropic paper sheet using photorefractive dynamic holography

An important material property in the paper industry is the anisotropic stiffness distribution due to the fibrous microstructure of paper and to processing procedures. Ultrasonic methods offer a means of determining the stiffness of sheets of paper from the anisotropic propagation characteristics of elastic Lamb waves along the machine direction and the cross direction. That is, along and perpendicular to the direction of paper production. Currently, piezoelectric ultrasonic methods are employed in the industry to measure the elastic polar diagram of paper through multiple contacting measurements made in all directions. This paper describes a new approach utilizing the INEEL Laser Ultrasonic Camera to provide a complete image of the elastic waves traveling in all directions in the plane of the paper sheet. This approach is based on optical dynamic holographic methods that record the out of plane ultrasonic motion over the entire paper surface simultaneously without scanning. The full-field imaging technique offers great potential for increasing the speed of the measurement and it ultimately provides a substantial amount of information concerning local property variations and flaws in the paper. This report shows the success of the method and the manner in which it yields the elastic polar diagram for the paper from the dispersive flexural or antisymmetric Lamb wave.     

Continual approximations of displacements in thick layered plates upon decomposition of thermomechanical loads into bilateral symmetric and antisymmetric components

Continual models of deformation of thick layered plates, where the general order of resolving equations does not depend on the number of layers, are constructed with account of the specific character of the unflexural and flexural deformation caused by the symmetric and antisymmetric components of bilateral loads and temperature. Account of the load decomposition during the process of refining a certain reasonable initial solution, consisting in the analytical iterative integration, makes it possible to obtain rather precise continual approximations of stresses and displacements over the transverse coordinate and thus to revise the known continual models.Ukrainian State Academy of Water Management, Rovno, the Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 743–756, November–December, 1999.     

Adaptive anisotropic noise filtering for magnitude MR data

Conventional noise filtering schemes applied to magnitude magnetic resonance (MR) images tacitly assume Gauss distributed noise. Magnitude MR data, however, are Rice distributed. Not incorporating this knowledge leads inevitably to biased results, in particular when applying such filters in regions with low signal-to-noise ratio. In this work, we show how the Rice data probability distribution can be incorporated so as to construct a noise filter that is far less biased.     

微通道板表面发雾的AES分析

应用俄歇电子能谱对微通道板表面发雾区域进行分析。分析结果表明,发雾区碳含量比正常区高三倍。由此可推测出,发雾是由碳污染引起的,而这种碳污染很可能是残留于微通道板上的某些有机物在烧氢时碳化所致。     

Position of starting spot in TLC: Influence on average plate height

Summary The influence of the distance between the solvent entry and the starting zone positions, Z₀, on the average plate height was studied. This factor was found to be of major importance and could be optimized. The Guiochon and Siouffi model greatly underestimates the plate height for low values of Z₀.     

一种位相板衍射图样的图像处理新方法

本文介绍了在半导体激光光纤和位相板相结合的准直情况下，利用ＣＣＤ探测器测量大尺寸形位误差的原理，并针对位相板衍射图像的特点，提出了一种处理此类衍射图样的图像处理新方法——投影法。同在时间上采用的多次平均的方法相比较，投影法相当于采用了空间上的平均，消除了ＣＣＤ表面保护玻璃形成的干涉条纹的影响，对空气扰动也起到了很好的抑制作用。并且使二维图像处理变为一维计算，大大提高了计算速度     

Brownian diffusion in a nonuniform gas

An analysis is made of the effects on the diffusion of Brownian particles whose Knudsen number is large compared to unity, of nonuniformities in the host gas. As examples, in one type of nonuniformity of the host gas, the Chapman-Enskog velocity distribution function for the gas molecules is used; in the other, the host gas is a free-molecule Couette flow. In both cases, a new force on the Brownian particles appears. Two techniques are used (extending Kramers' method and utilizing the Chapman-Enskog method) to transform the new Fokker-Planck equation into generalized Smoluchowski and convective diffusion equations. In these equations, the diffusion coefficient appears as a second-order tensor. Thus, it is demonstrated that Brownian diffusion in a nonuniform gas is anisotropic.The work of Slinn was financially supported in part by Battelle Memorial Institute and in part by U.S. Atomic Energy Commission Contract AT(45-1)-1830. The work of Shen was supported in part by U.S. Air Force Office of Scientific Research Contract 49(638)-1346.     

Optical metrics and birefringence of anisotropic media

The material tensor of linear response in electrodynamics is constructed out of products of two symmetric second rank tensor fields which in the approximation of geometrical optics and for uniaxial symmetry reduce to “optical” metrics, describing the phenomenon of birefringence. This representation is interpreted in the context of an underlying internal geometrical structure according to which the symmetric tensor fields are vectorial elements of an associated two-dimensional space.     

Steady light diffusion application to rheology: a new tool for the characterization of concentrated suspensions

We present new developments of steady light diffusion applied to rheology. Though many techniques allow the structural investigation of diluted or transparent media, very few give direct information on optically dense systems. The technique proposed here is based on the diffusion approximation and is thus valid for sheared, time-dependent flows.After recalling important theoretical results, we show the techniques ability to determine typical sizes and orientation of structures in shear flows for various concentrated suspensions (emulsions, and an industrial softener). In particular, it is able to demonstrate the effect of shear on the orientation of anisotropic objects. Moreover, the use of simple structural models incorporating the measured anisotropy allows good predictions of experimental rheological measurements. This new technique, applicable to a wide range of colloidal systems, is very helpful to characterize the shear induced structural organization of optically dense materials.This paper was presented at the first Annual European Rheology Conference (AERC) held in Guimarães, Portugal, September 11-13, 2003.     

Origination of In‐Phase Oscillations of Thin Plates with Aeroelastic Interaction

Synchronization of oscillations of thin elastic plates that are walls of a gasfilled channel is considered. The gas motion is described by a system of Navier–Stokes equations, which is solved using the secondorder MacCormack method with time splitting. The motion of the channel walls is described by a system of geometrically nonlinear dynamic equations of the theory of this plates, which is solved by the finitedifference method. Kinematic and dynamic contact conditions are imposed at the interface between the media. A numerical experiment is performed to determine typical dynamic regimes and study the transition of the aeroelastic system to inphase oscillations.