Chemical Composition and Reaction Mechanisms for Aged p‐Xylene Secondary Organic Aerosol in the Presence of Ammonia

A laboratory study was carried out to investigate the chemical composition of aged aromatic secondary organic aerosol (SOA) formed from the photoxidation of p‐xylene in the presence of ammonia (NH₃). The experiments were conducted by irradiating p‐xylene/CH₃ONO/NH₃ air mixtures without and with NO in a home‐made smog chamber. The particulate products of aged p‐ xylene SOA in the presence of NH₃ were measured by UV–vis spectrophotometry, attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy, and aerosol laser time‐of‐flight mass spectrometry (ALTOFMS) coupled with the fuzzy C‐means (FCM) clustering algorithm. The experimental results show that NH₃ does not alter the gas–particle partitioning in the photoxidation of p‐xylene without NO and that 2,5‐dimethylphenol is the predominant NH₃‐aged p‐xylene SOA without NO. However, NH₃ has a significant promotional effect on the formation of organonitrogen compounds in the OH‐initiated oxidation of p‐xylene with NO. Organic ammonium salts such as ammonium glyoxylate and p‐methyl ammonium benzoate, which are formed from NH₃ reactions with gaseous organic acids, were detected as the major particulate organonitrogen products of NH₃‐aged p‐xylene SOA with NO. 1H‐Imidazole, 4‐methyl‐1H‐imidazole, and other imidazole products of the heterogeneous reactions between NH₃ and dialdehydes of p‐xylene SOA were newly measured. The possible reaction mechanisms leading to these organonitrogen products are also discussed and proposed. The formation of imidazole products suggests that some ambient particles containing organonitrogen compounds may be the result of this mechanism. The results of this study may provide valuable information for discussing anthropogenic SOA aging mechanisms.     

景德镇市陶瓷业家庭婴幼儿铅中毒状况调查

为了解景德镇市陶瓷业家庭婴幼儿铅中毒状况，用多通道原子吸收光谱仪BH2100测定了l298名婴幼儿末梢血铅，并对陶瓷业家庭与非陶瓷业家庭婴幼儿铅中毒状况进行了比较。结果表明，陶瓷业家庭婴幼儿铅中毒发生率为66．09％，明显高于非陶瓷业家庭婴幼儿（15．96％），且随年龄增长婴幼儿铅中毒有增加趋势。提示对陶瓷业家庭婴幼儿铅中毒防治刻不容缓。     

甲烷无氧脱氢芳构化催化剂Mo/HZSM-5的研究

催化剂Ｍｏ／ＨＺＳＭ－５在甲烷地氧脱氢芳构化反应中表现出很高的活性，用ＸＲＤ，ＢＥＴ经表面，ＮＨ３－ＴＰＤ及ＴＰＲ等手段，对不抽提前后催化剂上的活性ｏ的种进行了研究，ＸＲＤ结果表明，Ｍｏ物种高度分散于筛表面，随着Ｍｏ担载量的提高，ＢＥＴ比表面积有所下降；但氨水抽提后，比表面积有很大程度的恢复，ＮＨ３－ＴＰＤ结果表明，Ｍｏ物种优先占据分子筛中的强酸位。ＴＰＲ结果显示出有ＭｏＯ３晶相存在的催化剂较易被     

Dispersion coefficients for first hyperpolarizabilities using coupled cluster quadratic response theory

The frequency dependence of third-order properties can in the normal dispersion region be expanded in a Taylor series in the frequency arguments. The dispersion coefficients thus obtained provide an efficient way of expressing the dispersion of frequency-dependent properties and are transferable between different optical processes. We derive analytic expressions for the dispersion coefficients of third-order properties in coupled cluster quadratic response theory and report an implementation for the three coupled cluster models CCS, CC2, and CCSD. Calculations are performed for the first hyperpolarizability of the NH₃ molecule. The convergence of the dispersion expansion with the order of the coefficients is examined and we find good convergence up to about half the frequency at which the first pole in the hyperpolarizability occurs. Padé approximants improve the convergence dramatically and extend the application range of the dispersion expansion to frequencies close to the first pole. The sensitivity of the dispersion coefficients on the dynamic correlation treatment and on the choice of the one-electron basis set is investigated. The results demonstrate that, contrary to presumptions in the literature, the dispersion coefficients are sensitive to basis set effects and correlation treatment similar to the static hyperpolarizabilities. Received: 26 March 1998 / Accepted: 21 July 1998 / Published online: 19 October 1998     

NO2对Cu/SAPO-34分子筛催化剂上NH3选择性催化还原NO性能的影响

主要考察了NO₂对Cu/SAPO-34 分子筛催化剂在整个温度范围内（100-500 ℃）NH₃选择性催化还原（SCR）NO性能的影响. 研究所使用样品为新鲜Cu/SAPO-34 催化剂在750 ℃下水热处理4 h 的稳定期样品.通过X射线衍射（XRD）和扫描电子显微镜（SEM）对样品的结构以及形貌进行表征,采用SCR活性评价、动力学实验以及原位漫反射傅里叶变换红外光谱（in situ-DRIFTS）表征催化剂的性能以及催化剂表面物种的变化. 活性评价实验结果表明,NO₂会抑制催化剂的低温（100-280 ℃）活性,但其存在会提高催化剂的高温（280 ℃以上）活性. 与此同时,随着反应物中NO/NO₂的摩尔比例减少,由于NH₄NO₃物种的分解,副产物（N₂2O）的浓度增大. 动力学结果表明,Cu/SAPO-34 催化剂上快速SCR反应的表观活化能（E_a=64.02 kJ·mol^-1）比标准SCR反应的表观活化能（E_a=48.00 kJ·mol^-1）更大. In situ-DRIFTS实验结果表明NO比NO₂更容易在催化剂表面形成硝酸盐,并且NO₂更容易与吸附在Brønsted 酸性位上的NH₃物种反应生成NH₄NO₃. 低温下,催化剂表面的NH₄NO₃物种会覆盖SCR反应的活性位,造成活性降低,但在高温时,形成的NH₄NO₃物种一部分会被NO还原为N2,而另一部分会直接热分解为N₂O,造成催化剂的选择性降低.     

COS对FT合成催化性能的影响

在５２４Ｋ、２．３１ＭＰａ和１８４５ｈ＾－１条件下，考察了合成气（Ｈ２／ＣＯ＝２．１）中ＣＯＳ浓度分别为５１．４、１２８．８、１６２．７和２４５．６ｐｐｍ对Ｆｅ－Ｃｕ－Ｋ工业催化剂ＦＴ合成催化性能的影响。实验表明，催化剂预先中毒比在线中毒速度快。大颗粒催化剂的抗硫能力比小颗粒催化剂强。催化剂ＦＴ合成失活速率与ＣＯＳ浓度有关，即高浓度条件下，催化剂的失活速率快。当温度为５２４Ｋ时，催化剂的失活速率最     

Heterogeneous molecular catalysis: Oxymoron or reality?

It has become common to call a molecular catalyst a single site catalyst. The intent is to stress that all sites of a molecular catalyst are identical in activity and selectivity. In this essay, three cases are examined. In each one the evidence is very strong that heterogeneous catalysts can be considered to be molecular catalysts. The first case is the cracking of alkanes on H-ZSM-5. The second is the oxidation of carbon monoxide on palladium. The third is ammonia synthesis on KMI, a multipromoted iron based commercial catalyst.     

La-Ce-Cu系列催化剂SO2中毒机理研究

采用NH_4NO_3共熔法合成La－Ce－Cu系列样品，并通过XRD分析了样品的相组成。XRF证明了系列样品组成均为氧缺陷型化合物．用TEM研究了样品的表面结构，发现随着SO_2中毒的加深，Cu向表面偏析与S结合生成新的化合物，导致了原晶体结构的变形，同时证明纯CeO_2不发生S中毒．XPS研究表明：样品La_(.029)Ce_(0.57)Cu_(0.14)O_x中毒后Cu从La_2CuO_4中分解出来并与S结合生成CuSO_4；相应的CeO_2参与了中毒反应，生成Ce_2O_3,整个中毒反应如下：La_2CuO_4＋2CeO_2＋SO_2＝CuSO_4＋La_2O_3＋Ce_2O_3     

负载Fe3（CO）12催化剂的制备及合成氨的催化活性

以Ｆｅ_３（ＣＯ）_（１２）为母体，以活性氧化铝或活性炭为载体制备了负载型氨合成催化剂．在固定床管式流动反应系统中测定了催化活性，并与以Ｒｕ_３（ＣＯ）_（１２）和ＲｕＣｌ_３·ｘＨ_２Ｏ为母体的负载催化剂以及低温高活性氨合成工业催化剂的活性进行了对比。结果表明：以活性炭为载体的Ｆｅ_３（ＣＯ）_（１２）催化剂在１５ＭＰａ、４００℃以上表现出很高活性，且每克纯活性组分的催化活性在某些温度下比当前活性较高的工业熔铁催化剂的活性要高得多，但低温常压下几乎无活性。负载钉催化剂在低温常压下即显活性，且以ＲｕＣｌ_３·ｘＨ_２Ｏ为母体，比以Ｒｕ_３（ＣＯ）_（１２）为母体的负载钌催化剂活性高。     

聚硅氮烷在氨气中的裂解研究

聚硅氮烷在氨气中的裂解研究胡海峰陈朝辉冯春祥张长瑞宋永才（国防科技大学五系长沙４１００７３）关键词聚硅氮烷，氨气气氛，裂解机理先驱体转化法是制备陶瓷的一种独特方法，但裂解产物往往偏离化学稳定相组成，尤其是硅氮烷裂解后氮含量不足影响了材料的高温性能．...