氮化锇配合物离子[OsN(mnt)2]-的电子结构和光谱性质的理论研究

理论研究了离子型配合物[OsN(mnt)2]-[mnt=S2C2(CN)2)]的电子结构和光谱性质, 考察不同配体三价N、二硫氰烯S2C2(CN)2和金属Os的相互作用对光化学性质的影响. 分别在B3LYP/LANL2DZ和CIS/LANL2DZ水平上优化了配合物的基态和激发态结构. 与基态(1A1)相比, 激发态(3A2)的Os≡N 的键长缩短了0.0066 nm, 这与计算得到的频率增大一致, 使用TD-DFT方法计算得到了配合物的吸收和发射光谱. 计算得到的位于300 nm(f=0.1497)和262 nm(f=0.2890)的强吸收都来自1A1→1B1跃迁, 分别指认为SC→Os≡N+CN 和N+SC→Os≡N+CN的电子跃迁. 最低能量的吸收位于446 nm(f=0.0206) 处, 来自1A1→1B2的电子跃迁, 指认为N→Os和 N+SC→CN. 计算得到配合物在气态的磷光发射位于678 nm(A3A2→X1A1)处, 而在丙酮溶液中则蓝移到了625 nm处, 跃迁属性不变, 都是N→Os和S→Os的跃迁.     

Y2O3薄膜处理对3Cr25Ni7N合金的抗高温氧化性能的影响

采用电沉积-热解法在3Cr25Ni7N合金表面制备了Y2O3薄膜,并研究了薄膜处理对合金在1000℃空气中的抗高温氧化性能的影响。氧化动力学曲线、SEM及XRD分析结果表明,Y2O3薄膜处理使合金表面氧化膜以尖晶石结构为主,氧化膜致密,有效地抑制了Cr2O3的挥发反应,且氧化膜与基体的附着性好,因此合金在高温下的抗氧化性能得到提高,这与氧化钇薄膜在较低温度下抗高温氧化性能提高的机制是不同的。在不同温度下,Y2O3薄膜处理均可以有效提高合金的抗高温氧化性能。     

New Rare Earth（Ⅲ） Complexes with H2tmtaa

A series of Ln(tmtaa)(Htmtaa)·CH_2Cl_2(Ln=Sm,Tb,Er and Yb)complexes were prepared and characterized byinfrared spectra,mass spectra and molecular electronic spectroscopy as well as DSC measurement.A sandwichstructure containing all the eight nitrogen atoms of tmtaa and Htmtaa was proposed for these complexes.X-rayphotoelectron spectra(XPS)of these complexes revealed that four nitrogen atoms of both tmtaa and Htmtaa werechemically equivalent to each other,respectively.The acidic hydrogen of Htmtaa did not bind specifically to any ni-trogen atom of Htmtaa,but was shared by all the four nitrogen atoms.The magnetic properties of these complexeswere found to be in good agreement with their theoretical values.     

Photocatalytic Oxidation of Aniline in the Gas Phase Using Porous TiO2 Thin Films

The gas-phase photocatalytic oxidation of aniline on a new kind of porous nano-TiO₂ composite films is investigated. The composite film was prepared on glass fiber with the water glass as binders and dilute H₂SO₄ solution as solidifying reagent. The surface characters were observed by scanning electron microscope. The photocatalytic degradation of aniline on the composite films was carried out in a TiO₂/UV system. Some important factors affecting the photodegradation, such as the concentration of TiO₂, the initial concentration of aniline, and the existing water vapor, are also studied. The product of photocatalytic oxidation was detected by Fourier transform-Infrared. The partial intermediate products were absorbed on TiO₂ surface, which resulted in catalyst deactivation. But when it was irradiated under UV illumination or solar irradiation for some time, the catalyst could be reused without loss of catalytic activity. Translated from the Journal of Wuhan University (Natural Science Edition), 2005, 51(2) (in Chinese)     

PREPARATION OF POLYSULFONAMIDE/TiO2 NANOCOMPOSITES BY SOL-GEL

Polysulfonamide (PSA) was synthesized at room temperature, the polymerization based on terephthaloyl chloride and 3,3 '-diaminodiphenylsulfone in the common solvent N,N -Dimethyl-acetamide (DMAc). Polysulfonamide/titanium oxide nanocomposites were prepared by sol-gel method. Tetrabutyl titanate(TBT) was added into the polysulfonamide solution, at the same time ,some water was mixed to make the TBT hydrolyze. In the process, hydrochloric acid was used to catalyze the reaction. The polysulfonamide chemistry structure was characterized by FT-IR spectrum. Atomic force microscopy (AFM) was employed to observe the microstructure of the composite film. The thermal property was investigated by TGA.The results show that we have succeeded to synthesize the polysulfonamide, TiO2particles were well distributed in the composite film and average size was about 20 nm on average, the heat-resistance of nanocomposite was batter than the pure polysulfonamide.     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.     

Characterization of mesoporous nanocrystalline TiO2 photocatalysts synthesized via a sol-solvothermal process at a low temperature

Nanocrystalline TiO₂ samples with mesoporous structure were prepared via a solvothermal treatment of surfactant-stabilized TiO₂ sols. The samples were obtained from media of different acidities including nitric acid, deionized water, and ammonia (denoted as HT-1, HT-2 and HT-3, respectively). These samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂-sorption (BET surface area), micro-Raman spectroscopy, infrared absorption spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were tested by the self-photosensitized degradation of an azo dye, Mordant Yellow 10 (MY), in aqueous solution under visible light irradiation. The results reveal that all three samples have high surface area and are pure anatase phase. The sample prepared in nitric acid medium possesses the most ideal mesoporous structure and also exhibits a blue shift in the Raman spectrum. All three samples show much higher photocatalytic activity than the commercial P-25. The activity order of the three samples is HT-1>HT-2>HT-3.     

聚四氟乙烯纤维辐照接枝制备弱酸性离子交换剂及其对Cu~(2+)的吸附

以聚四氟乙烯纤维为基体通过6 0 Co辐射引发与丙烯酸接枝制备弱酸性阳离子交换纤维 .产物功能基含量为 3 0 6mmol g,在pH =5时该纤维达到对Cu2 + 的最大动态吸附量为 10 7 4 8mg g.使用不同浓度HCl对饱和吸附铜的接枝纤维进行洗脱 ,证实该纤维对铜离子具有优异的解吸性能     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

syn-2,3-Disubstituted-2,3-dihydro-1,4-benzoxathiin rings: preparation from quinone ketals and 2-mercaptoethanols

A general method for the preparation of syn-2,3-disubstituted-2,3-dihydro-1,4-benzoxathiin rings from 2-mercaptoethanols and quinone ketals is presented. This ring system is produced by Michael addition of a 2-mercaptoethanol to a quinone ketal, followed by cyclization of the initial Michael adduct, and subsequent aromatization to afford a syn-2,3-disubstituted-1,4-benzoxathiin in fair to good chemical yield. Several chiral syn-2,3-disubstituted-2,3-dihydro-1,4-benzoxathiin rings were prepared with this method from enantioenriched 2-mercaptoethanols. No loss of enantiopurity was observed.