Fractional-Linear Transformations of Operator Balls; Applications to Dynamical Systems

The operator sets, which are the subject of this paper, have been studied in many papers where, under different restrictions on the generating operators, convexity, compactness in the weak operator topology, and nonemptiness were proved for sets of different classes under study. Then the results obtained were used in these papers to solve several applied problems. Namely, they played the key role in establishing the dichotomy of nonautonomous dynamical systems, with either continuous or discrete time. In the present paper, we generalize and sharpen the already known criteria and obtain several new criteria for convexity, compactness, and nonemptiness of several special operator sets. Then, using the assertions obtained, we construct examples of sets of the form under study which are nonconvex, noncompact in the weak operator topology, as well as empty, and are generated by ＂smooth＂ operators of a special class. The existence problem for such sets remained open until the authors of this paper announced some of its results.     

关于落球法测粘滞系数的公式和使用范围

用落球法测粘滞系数的二级近似公式,有些教材是以过时的戈尔茨坦(Goldstein)公式为依据得出来的,而雷诺(Reynolds)数R~2项的系数却与原公式不一致。本文提出一些商榷意见,并讨论一下落球法的使用范围。一、正确的二级近似公式直径为d的小球,在粘滞系数为η、     

0.351μm激光辐照Au盘靶吸收、散射规律的实验研究

在“星光Ⅱ”激光装置上，利用80只分立式探测器研究了约0.8ns，0.351μm激光辐照Au盘靶的吸收、散射．结果表明，强度约为5×10¹⁴W/cm²的激光以10°角入射，吸收可达90%以上；但是，以45°角入射，吸收仅为75%左右，散射高达25%．散射主要来自未被等离子体充分吸收的激光在弯曲临界面上的反射，同时伴随少量受激布里渊散射．吸收的理论计算与实验结果进行了比较，两者符合较好． 关键词：     

胶球研究现状

本文介绍了有关胶球研究的现状,重点介绍确认胶球的一些定性的判据以及实验上已发现的一些可能的胶球候选者.     

位置参数估计量的损失函数之估计

本文考虑损失函数的估计问题,分别对于球对称分布和均匀分布情形给出了其参数的J-S型估计量的损失之估计,它们满足[1]中提出的条件(Ⅰ)和(Ⅱ).     

球约束凸二次规划的一个新算法

首先利用Lagrange对偶 ,将球约束凸二次规划问题转化为无约束优化问题 ,然后运用单纯形法求解无约束优化问题 ,从而获得原问题的最优解     

球缺药型罩爆炸成形弹丸数值模拟

采用变壁厚球缺形药型罩可以形成速度梯度小的爆炸成形弹丸，有效增加成坑直径；另外，通过使用轻金属药型罩改变聚能装药各部件间的质量分配，从而实现爆轰过程中能量分配的优化，也是提高射弹能量的一条可行途径。     

ICF研究中的Rayleigh-Taylor不稳定性实验用靶

 概述了当前研究Rayleigh-Taylor不稳定性增长实验所用的靶型情况。从实验用靶来看，调制靶的设计正从平面向立体发展，出现了球形和柱形等新靶形，制备手段包括精密机械微加工、激光束、电子束和离子束加工、半导体工艺和微米纳米技术加工等。根据对国外新靶型的研究，结合国内工艺条件和实验需求，对国内可能采用的靶型进行了研究探索。