一种模拟动边界绕流的锐利界面浸入边界法

When the structural wall moves over a fixed grid, the structure coverage will change, resulting in many dead and emerging elements. To avoid the influence of malformation and reconstruction of body-fitted grids on the calculation efficiency and accuracy of the fluid-structure interaction problems with coupled boundary movement on the fixed grid, an improved numerical method for describing the interaction between an immersed rigid body and fluid based on a sharp-interface is proposed. In this method, both the fluid and solid are regarded as pure fluid domains in the whole computational domain, and the solid boundary is divided into several Lagrangian grid points. The flow parameter or velocity is reconstructed by interpolation at the interface element, which is then directly used as the boundary condition of the flow field, thus reflecting the influence of the wall boundary conditions. The method constructs the calculation structure of “virtual point, force point and vertical foot point”, and the velocity of the virtual point is obtained by bilinear interpolation. Then, the velocity of the force point is calculated by forcing the solid boundary to meet the no-slip condition, and the equations of the coupling system based on the immersion boundary method are finally solved to realize the numerical simulation of the flow with a complex moving boundary. The numerical program for this immersed boundary method is established using C++, then the accuracy and reliability of the proposed method are validated by comparison with the literature and experimental results of the basic numerical example of flow around a cylinder. Furthermore, the effects of the structural shape and the angle of attack on the trailing vortex structure, the vortex shedding frequency, and the lift/ coefficient characteristics of the flow around the elliptical cylinder have been analyzed. The anti-symmetric S-type, “P+S” Ⅰ-type and “P+S” Ⅱ-type trailing vortex shedding modes, as well as the variation laws of the vortex structure size, vortex shedding frequency and lift-drag coefficients ratio with axis ratio and angle of attack, are captured. The critical angle of attack (25°) corresponding to the maximum lift-drag ratio is determined as 25°.     

火灾与撞击联合作用下钢管混凝土柱力学性能研究

为研究火灾高温与撞击联合作用下钢管混凝土柱的力学性能,基于ABAQUS建立了高温作用下考虑轴力影响的钢管混凝土柱侧向撞击有限元模型。首先,对高温与撞击联合作用下考虑轴力影响的钢管混凝土柱的破坏模式与受力全过程进行了分析,探讨了高温下钢管混凝土柱的抗撞性能与工作机理;其次,重点研究了受火时间、材料强度、含钢率以及撞击能量对抗撞性能的影响,并给出了相关设计建议。研究结果表明:高温与撞击联合作用下,钢管混凝土柱主要发生受弯破坏;受火15 min后,构件抗撞性能明显降低。轴压力对构件抗撞性能产生不利影响,轴压比从0增加到0.2,受火60 min构件抗撞性能下降了7.8%;混凝土强度对高温下钢管混凝土柱抗撞性能有显著影响,受火90 min后,混凝土强度由30 MPa增加到50 MPa,构件抗撞性能提高约85%;外钢管强度与含钢率对高温下抗撞性能影响不大。     

反射式转镜干涉光谱仪光程差计算

高分辨率反射式转镜干涉光谱仪是一种新型傅里叶变换光谱仪,它利用倾斜旋转镜的转动产生非线性的光程差(OPD).光程差的研究对于干涉光谱仪的性能指标分析、设计和研制具有重要意义.在介绍反射式转镜干涉光谱仪的原理基础上,描述了利用基于马吕斯定律的光线追迹法和基于镜面成像原理的像点法分析其光程差的方法.利用光线追迹法导出了任意...     

基于色散条纹传感器的拼接镜面共相的实验研究

研制极大望远镜的拼接主镜时,为使得望远镜系统成像质量达到衍射极限,子镜的定位精度需要满足共相位要求,那么必须对子镜之间的平移误差进行实时精确检测和校正.在对色散条纹检测和色散哈特曼检测原理分析的基础上,建造了一台色散条纹传感器,并在室内拼接镜面主动光学实验系统上开展检测实验,验证了检测信号和平移误差之间存在确定的函数关...     

椭圆、双曲线的一个定值性质及极端情形

在对圆锥曲线的研究中,笔者偶得关于椭圆、双曲线的如下一个涉及焦点、中心的定值性质.定理1设     

Precipitate Contribution to the Acoustic Nonlinearity in Nickel-Based Superalloy

The influence of γ′ precipitate on the acoustic nonlinearity is investigated for a nickel-based superalloy, which is subjected to creep deformation. During creep deformation, the cuboidal γ′ precipitate is preferentially coarsened in a direction perpendicular to the applied stress axis. The length and shape factor of the γ′ precipitate increase with creep time. The increase of relative acoustic nonlinearity with increasing fraction of creep life is discussed in relation to the rafting of γ′ precipitate, which is closely related to the scattering and distortion of the acoustic wave     

双轴晶体锥光效应光盘径向寻迹研究

根据晶体锥光效应提出一种光控制方法.在双轴晶体中光波沿光轴方向入射时,其传播方向随光偏振方向的不同而改变,通过控制磁光偏振调制器上磁场强度改变光的偏振方向,从而实现对激光束方向的控制.据此分析了双轴晶体锥光效应光盘寻迹的基本原理并设计出总体方案,数值模拟计算得到晶体入射光偏振角度与寻迹位移的关系,初步验证了此方案的合理性,该方案与传统机电跟踪寻迹方式相比具有结构轻巧,动态响应快等优点.同时,也为光开关、扫描等技术提供了一种新的思想和方法.     

高速扫描相机时间测量不确定度分析

以国内普遍使用的SJZ-30型高速扫描相机为例,用精测转速方法的结果处理数据,转速测量相对合成不确定度小于0.1%,时间间隔测量的相对扩展不确定度为0.2%.扫描速度在像面上的位置误差,采用"中值扫描速度",可予以校正.同时讨论了进一步降低转速测量不确定度和位置误差的方法.     

电磁脉冲模拟器前后过渡段锥角设计

 采用矩量法并结合快速多极子方法，对电磁脉冲模拟器内部场波形进行了数值计算，寻找过渡段结构与电磁脉冲波形等的关系，从理论上对模拟器前后过渡段的锥角进行了优化。结果表明：存在前后过渡段的结构都会激起场强沿传播方向的分量；前过渡段主要对工作区域场波形的上升沿产生影响，当前锥角减小时，场波形的上升时间先减小再缓慢增加；后过渡段主要对场波形的衰减部分产生影响，使场波形的衰减部分随着后锥角的增大而产生严重畸变。最终优化设计的电磁脉冲模拟器前过渡段的锥角为15°，后过渡段的锥角为20°，其仿真得到的波形较光滑，没有出现振荡及明显的畸变。     

半无限规划的一个对偶问题

本文对半无限凸规划提出一个新的对偶问题，使用扰动函数、次微分和法锥，文中证明了相应的弱对偶性及强对偶性的充要条件．