在LiCl-KCl共晶熔体中电化学制备钬镍金属间化合物

采用循环伏安、方波伏安和开路计时电位等研究了Ho(Ⅲ)离子在LiCl-KCl共晶熔体中的电化学行为及Ho-Ni合金化机理。在惰性W电极上,Ho(Ⅲ)离子在-2.06 V(vs Ag/AgCl)发生电化学还原,该还原过程为3个电子转移的一步反应。与惰性W电极上的循环伏安相比,Ho(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了3对氧化还原峰,是Ho与Ni形成了金属间化合物,导致了Ho(Ⅲ)离子在活性Ni电极发生了欠电位沉积。在不同的电位进行恒电位电解制备的3个不同的Ho-Ni合金,采用X-射线衍射(XRD)和扫描电子显微镜-能谱仪(SEM-EDS)等测试手段进行表征,结果表明:制备的3种合金分别是Ho₂Ni₁₇,HoNi₅ 和 HoNi₂ 3种合金化合物。     

室温下制备以{211}晶面为主的Ti1-xVxO2薄膜及其可见光催化性能

以金属Ti和V作为靶材,采用直流反应共溅射技术在室温下制备了以{211}晶面为主的锐钛矿相Ti_1-xV_xO₂薄膜,研究了不同V靶功率对Ti_1-xV_xO₂薄膜的薄膜成分、晶相结构和可见光催化性能的影响。研究表明,Ti_1-xV_xO₂薄膜的晶相结构为锐钛矿相,择优取向为(211),而结晶度受V靶功率的影响。随着V靶功率的增加,薄膜中V元素含量逐渐增加,同时,晶粒和沉积速率也逐渐增加。另外,当V靶功率为150 W时,薄膜的表面粗糙度值有一个最大值。V的掺杂导致薄膜的能带间隙变窄,对光的吸收向可见光区偏移,从而有效地改善了薄膜的可见光催化能力。当V靶功率为150 W时,Ti_1-xV_xO₂薄膜的能带间隙值为 2.82 eV,其在2 h的可见光照射下分解了80%的RhB染料。这被归结于能带间隙窄,高能晶面{211}和结晶度高的共同作用。     

间氨基水杨酸修饰超高交联吸附树脂对酚类化合物的吸附行为

合成间氨基水杨酸修饰的超高交联吸附树脂LZ-01,比较LZ-01树脂与NJ-8树脂对对甲基苯酚和对硝基苯酚的吸附能力,研究LZ-01树脂在不同温度(288K,313K,318K)下吸附水溶液中对甲基苯酚和对硝基苯酚的静态吸附热力学和动力学行为。结果表明,由于LZ-01树脂具有更大的比表面积、更多的微孔且含有氨基、羟基和羧基等基团,使其对对甲基苯酚和对硝基苯酚的吸附量明显高于NJ-8树脂。Freundlich方程对等温吸附数据能够很好地拟合,吸附焓变绝对值小于40kJ/mol,表明吸附是焓驱动的物理吸附过程。LZ-01树脂对对甲基苯酚和对硝基苯酚吸附动力学均符合准一级动力学方程,吸附速率随温度升高而增大,颗粒内扩散是该吸附过程的速控步骤。     

重金属铊在环境介质中的分布及其迁移行为

铊是剧毒重金属元素,它在自然界中是典型的稀有分散金属。环境介质中铊的自然本底值较低,但随着铊矿床的开发和铊资源的广泛应用,岩矿石中的铊在自然力或人为作用下向环境介质中迁移。综述了铊在岩（矿）石、土壤、水体、动植物和人体中的分布,以及在上述环境介质及大气中的迁移行为。研究表明,人类活动是导致环境介质中铊含量增加的主要原因。铊在环境介质中的迁移是反复循环的复杂过程,通过风化、溶解、淋滤、吸收、沉降、固结等方式在环境介质中循环往复,从而危害环境生态和人体健康。铊污染应引起人们的普遍重视。     

氯过氧化物酶活性中心结构域中Mn2+与酶催化行为的关系

通过乙二胺四乙酸二钠(EDTA)配位竞争反应结合石墨炉原子吸收及电感耦合等离子体发射检测结果,为氯过氧化物酶(CPO)活性中心血红素丙酸根与金属Mn2+配位结合提供了更直接的证据;基于Mn2+移除前后CPO的紫外特征吸收光谱、圆二色谱以及氯化活性和过氧化活性的变化,阐明了Mn2+的存在对于保持酶活性中心的结构域、稳定CPO的优势构象具有一定作用,是酶分子表现活力所必需的结构元素.本研究还发现移除Mn2+前后CPO血红素活性中心微环境的变化是一个可逆过程,重新引入Mn2+后活性可恢复,并且以外源性Ag+和Cr3+替代Mn2+后,CPO的氯化活性和过氧化活性分别比天然态的酶有所改善,为通过化学修饰提高CPO的催化活性提供了新的途径.     

Solution Crystallization Behavior of Linear and Star-shaped Poly(ethylene glycol)-b-Poly(ε-caprolactone) Block Copolymers简

Lamellar crystals of diblock, triblock and four-arm poly（ethylene glycol）-b-poly（ε-caprolactone） （PEG-b-PCL） crystalline-crystalline copolymers were successfully obtained from their solution. Morphology and structure of lamellar crystals of crystalline-crystalline copotymers were investigated using tapping-mode atomic force microscopy （AFM） and selected area electron diffraction （SAED）. All of these samples showed the truncated-lozenge multilayer basal shapes with central screw dislocation or central stack, which were all obtained simultaneously from the oil bath. The diffraction pattern of PEG block lamellar crystal is attributed to the （120） diffracting planes and the pattern of PCL block lamellar crystal is attributed to the （1 I0） diffracting planes and （200） diffracting planes according to the SAED results. Four （110） crystal growth planes and two （200） crystal growth planes are discovered for the PCL blocks, but the （120） crystal growth planes of PEG blocks are hided in the figure of AFM. The crystalline structure of the four-arm copolymers （FA） is more disorder and confused than that of the diblock （DI） copolymer and the striated fold surface structures of lamellar crystals of four-arm copolymers （FA） are smoother than these of linear analogues, owing to the confused crystallization of blocks caused by the mutual restriction of blocks and the hindrance of the dendritic cores. In addition, the aspect ratio of FA is greater than that of the others. It is hypothesized that there are two reasons for the change of aspect ratios. First, the （200） diffracting planes of PCL crystals grew slowly compared to their （110） diffracting planes because of difference in the energy barrier. Secondly, edge dislocations on the （200） diffracting planes are also responsible for the variation of the aspect ratio. Consequently, the crystalline defects are augmented by the competing blocks crystallized simultaneously and the hindrance of the dendritic cores.     

过渡金属氧化物对阻燃剂聚磷酸铵热分解的影响机制

过渡金属氧化物(MO)可以显著影响聚磷酸铵(APP)的热分解过程,进而改善APP复配膨胀阻燃聚合物材料的阻燃效率。将ZnO、Fe2O3、TiO2掺入到APP中,采用热失重分析(TGA)、X射线光电子能谱(XPS)和X射线衍射分析(XRD),考察了3种MO对APP热分解行为的影响,分析了相互作用过程中金属原子和磷原子化学结合状态的变化以及高温热分解产物的物相结构。TGA和XPS图谱分析结果表明,MO可降低APP的起始热分解温度,并催化APP释放NH3和H2O,而在热分解后期由于金属磷酸盐的形成可显著增加APP的高温残留量。3种MO催化APP热分解脱NH3和H2O的活性由大到小的顺序是:ZnO>Fe2O3>TiO2,而对APP凝聚相热分解P-O产物的交联能力从大到小的顺序为:Fe2O3>ZnO>TiO2。XRD结果显示,ZnO在高温下与APP反应生成了Zn(PO3)2晶体,而Fe2O3和TiO2与APP反应分别生成了Fe4(P2O7)3和TiP2O7晶体。     

基于CAR模型国内A股市场反应不足的实证分析

主要关注的主体异象为反应不足,在已有的HS模型基础上,对我国IPO改革背景下的证券市场投资策略进行了实证研究.实证过程中主要采用了市场调整模型计算累计超额收益率,并根据样本条件划分适当的形成期和检验期.在此基础上,以经典的"赢者组合"和"输者组合"方法对实证数据进行分析,最终发现A股市场中存在反应不足的金融异象.     

基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

爆轰波对碰驱动平面锡飞层的动力学及动载行为特征研究

强冲击下的物质变形、破坏及诱发的轻重介质混合问题,是内爆压缩科学和工程应用领域的研究重点.本文针对爆轰波对碰条件下的复杂加载动力学过程及其动载破坏形态特征,开展数值模拟研究与极曲线理论分析.设计了爆轰波对碰驱动平面锡飞层的计算模型,获得了爆轰加载动力学过程及波系相互作用物理图像,分析了锡飞层对碰区自由表面速度历史的典型特征.给出了锡飞层中折射激波对碰发生马赫反射的临界条件,解读了三波结构的传播行为,阐明了对碰区内存在"一维正冲击"区域,一维区外存在单次斜冲击向两次斜冲击过渡的复杂加载动力学过程,提出了对碰区冲击动力学模型,揭示了影响对碰区动载行为特征的机理.数值模拟结果与极曲线理论分析结果相互印证,符合较好.本文的研究成果,将为深入理解和解读对碰区特殊的物质破坏及混合现象提供重要的理论支撑.