液晶显示器用导电粉的扫描电镜图像

液晶显示器用导电粉的形状、尺寸及偏差对于液晶显示屏的质量控制来说是非常重要的。论述了液晶显示器(LCD)用导电粉的作用和性能要求。给出了液晶显示器用导电粉的扫描电镜图像。该图像对观测导电粉的粒径分布、导电粉在导电点中的浓度和分析导电点缺陷、提高液晶显示器的产品质量具有一定的意义。     

Simultaneous Measurement of Transverse Load and Temperature Using a single Long—Period Fibre Grating Element

A single long-period fibre grating (LPFG)element written by focused high-fraequency CO2 laser pulses is demonstrated for simultaneous measurement of transverse load and temperature.Temperature and transverse load can be directly measured by detecting the resonant wavelength shift and the resonant peak amplitude change of the LPFG,respectively,as there are two special circular orientations along the fibre axis where the resonant peak amplitude change of the LPFG has a linear relationship with the load applied and is insensitive to the resonant wavelength shift.Such a sensor could solve the cross-sensitivity problem between transverse load and temperature due to the unique feature of this type of LPFG,i.e. the wavelength-load-sensitivity of the LPFG strongly depends on loading orientations due to the non-uniform distribution of the refractive index on the cross-section of the LPFG caused by the thermal shock effect and other effects of the high-frequency CO2 laser pulses exposure method used.     

同轴双无衍射光的理论与实验

提出同轴双无衍射光的概念。如果两束汇聚角略有不同的同轴无衍射光同时存在，则它们相互之间叠加干涉后产生一种纵向呈周期变化的光场结构，这是一种新的光束空间分布，这种光束在横向仍是一种同心环光斑，可用于精密对准。而在不同纵向位置，这些同心环的强度分布是不同的，且是周期性变化的。同轴双无衍射光的轴向周期性可用于沿光束传播方向的定位。文中提出了双环缝法、分段圆锥透镜法、正弦相位环光栅法等实现同轴双无衍射光的理论与实验方法，分析了同轴双无衍射光的横向与纵向传播的衍射光斑特性，理论计算与实验测量的结果基本相符合。     

用光栅衍射法测试液体表面张力

利用π型直线状振源，在待测液面产生正弦形表面驻波，将其作为一种理想的反射式光栅，通过对激光束的衍射，形成线阵衍射光斑．借助LCCD等硬件测试系统及相应的数据采集与处理系统，实时准确地测量液体表面张力。     

也论平面透射光栅状态的调节

前言前段时间,贵刊先后发表了两篇有关平面透射光栅状态调节方面的文章。其中86年第5期,刘慎秋等同志的文章的主要意思是:由于有些复制光栅的两表面间并不平行,因而造成在光栅面上光线的入射角将不为零。而这“几分”     

在相干理论的基础上分析光栅成像

本文在相干理论的基础上,推导了光栅成像中的光强分布和物像位置关系,并给出一组具有不同参数的实验照片及一组借助计算机绘制的强度分布图。     

Fabrication of Long-Period Fibre Gratings Using 800 nm Femtosecond Laser Pulses

Long-period fibre gratings inside standard single-mode optical communication fibres are successfully fabricated with infrared femtosecond laser pulses. The refractive index perturbations are well confined within the fibre core by choosing the proper laser focusing parameters and translation speed of the fibre during the direct laser writing process. With the self-focusing effect considered and at a constant average irradiation dose of 1.62 × 10^3 J/（cm^2μm）, the threshold intensity for fabricating long-period gratings with infrared femtosecond laser pulses is determined to be 5.13 × 10^13 W/cm2.     

Fast Optical Switching Using Oriented Cyanine Dye-Doped Nematic Liquid Crystal

A cyanine dye, 2-[7-（1,3-dihydro-1,3,3-trimethyl-2H-indol-2-ylidene）-1,3,5-heptatrienyl]-1,3,3-trimethyl-3H-indolium iodide （NK-125）, is doped in 4-cyano-4＇-pentylbiphenyl （5 CB）, and the mixture is sandwiched between two pieces of rubbed glass plates. The third-order nonlinear optical properties of the oriented NK-125-SCB layers are measured by the resonant femtosecond degenerate four-wave mixing （DFWM） technique at 760 nm. The third-order nonlinear optical susceptibility of one of the present samples is 5.5×10^-8 esu. The slow DFWM response of the NK-125-SCB layers due to a population grating is accelerated by the increasing laser power because of amplified spontaneous emission （ASE）. On the other hand, we do not observe a similar phenomenon for NK-125- polyethylene glycol （PEG-400）. Oriented NK-125 molecules in nematic liquid crystals must have very high ASE efficiency. Hence the population grating in a DFWM signal disappears within about 4 ps. It is expected that NK-125-SCB can be used as a material for very fast all-optical switching.     

波长检测技术在温度测量中的应用

提出一种波长检测技术实现温度测量的方法,利用FBG传感器对温度等物理量实施监测,具有测试精度高,应用场合不受限制等特点,当环境参数发生变化时,光纤光栅的有效折射率和光栅周期会受到影响,将引起光纤光栅峰值波长的偏移,依据反射光谱结构的变化,可知道其温度的变化趋势。实验测试结果表明,在温度变化0.1°,波长变化1pm,温度和波长具有良好的线性关系。