概率论在就业决策中的一个应用

随着科学技术的飞速发展，生产力水平正在不断提高，各行各业的就业岗位已经远远不能满足即将从业者的需求，就业“供”与“需”之间的予盾越来越突出．对于一名即将从业的人（尤其是即将毕业的大学生）来说，面对强手如林的竞争局面，除了刻苦学习必备的基础知识，努力训练从业的基本技能以外，在竞争工作岗位时，如何进行就业的决策，也是一个不容忽视的问题．本文通过几种具体情况，对这个问题进行一点探讨．     

矩阵法拟定化学反应机理软件

本软件是根据Happel和Sellers提出的矩阵法编制的。用户只需输入基元反应方程式及其系数矩阵,即可得出全部动力学上有意义的反应路线。本软件不但可用于单一总反应的物系,也可用于多个总反应的物系,既适于均相反应,也适于非均相反应。它是拟定化学反应机理的有力工具。本软件用BASIC语言编写,由DOS3.3以上版本支持,可在APPLE-Ⅱ及其兼容机上运行,使用十分方便。     

超声Doppler血流信号自回归谱估计研究

本文讨论了自回归(AR)模型用于处理超声Doppler血流信号的情况。实验表明,AR谱估计比FFT周期谱具有分辨率高,随机起伏误差小等优点。     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Fabrication of Dendrimer－like PAMAM Based on Silica Nanoparticles

A G 4.0 dendrimer-like poly (amido amine) (PAMAM) based on silica nanoparticles was fabricated via a divergent approach.It was built from γ-aminopropyi silica nanoparfides (APSN) core via repetitive addition of acrylate (MA) and hexylenediamine (HDA). FT-IR and EA were used to monitor the progress of dendrimer during each step. The amino group content of the resulting product increased from 0.49 to 3.72 mmol/g after the 4th generation. In addition, the percentage of grafting increased with increasing generation and reached to 65.9% after 4th generation. It was found that the resulting silica nanoparticles could be dispersed in methanol with a mean hydrodynamic particle diameter of 152.7 nm although the silica nanoparticles had agglomerated during the storage period.     

波片复合旋光器研究

利用矩阵光学方法，分析了波片复合旋光器的理论基础，给出了二元和三元复合波片旋光器的条件及其旋光角的大小的数学表达式，并根据此理论作了典型设计。结果表明，旋光角的大小与各波片的延迟量和它们的快轴同X轴的夹角有关。     

Three-Step Predictor-Corrector of Exponential Fitting Method for Nonlinear Schroedinger Equations

We develop the three-step explicit and implicit schemes of exponential fitting methods. We use the three- step explicit exponential fitting scheme to predict an approximation, then use the three-step implicit exponential fitting scheme to correct this prediction. This combination is called the three-step predictor-corrector of exponential fitting method. The three-step predictor-corrector of exponential fitting method is applied to numerically compute the coupled nonlinear Schroedinger equation and the nonlinear Schroedinger equation with varying coefficients. The numerical results show that the scheme is highly accurate.     

12kW二极管泵浦激光模块

二极管泵浦固体激光器（DPL）具有寿命长、热负载小、结构紧凑等优点，在工业加工、军事、通讯等领域都得到了广泛的应用。在高光束质量、高平均功率DPL激光器的研究中，目前普遍采用MOPA结构的光路布局——由谐振腔产生出低功率的单横模激光输出，经多路放大后达到满足需求的功率水平。而激光放大模块作为放大光路中的核心部件，其增益分布特性将直接影响到光束放大过程中的波前变化，因此如何在提高激光放大模块储能的同时提高模块增益分布的均匀性，从而减少光路放大过程的波前畸变，对于进一步研制高平均功率、高光束质量的半导体泵浦固体激光器具有非常重要的意义。     

SPME-GC-MS快速分析炼油厂废水中痕量VOCs

采用固相微萃取-气相色谱-质谱联用(SPME-GC-MS)对炼油厂废水中痕量挥发性有机化合物(VOCs)进行了定性分析,简化了预处理过程,总分析时间为1h左右.对比处理前后的废水样品的MS定性结果,为废水处理工艺的评价以及有机物降解机理提供了依据.