纳米表面相互作用及振动测头模型

如何实现高精度的测量是现代制造业及微电子技术领域的热点问题之一. 基于微纳米测头的三坐标测量机是当前实现高精度测量的重要手段. 随着测量尺寸的减小, 常用的纳米/微纳尺度的测头与待测表面之间形成静态接触, 其表面相互作用成为了影响其测量精度和可靠性的关键因素之一. 本文基于一种触发式振动测头, 研究了其动力学模型, 并通过对测头纳米尺度表面相互作用的理论分析及数值模拟, 确立了测头振动参数与表面相互作用之间的关联. 实验研究表明, 参数优化后的谐振微纳测头能有效抑制表面作用带来的干扰, 提高测量精度.     

低空大展弦比无人机翼梢磁梯度测量探头气动特性及影响

针对一种低空大展弦比无人机, 文章进行全机和翼梢磁梯度测量探头数值模拟.全机计算给出翼梢磁梯度测量探头对全机气动特性和操稳特性的影响; 翼梢磁梯度测量探头计算实现了气动外形优化设计, 在保持全机操稳特性的前提下, 最大程度地减小全机气动阻力增量.结果表明, 磁梯度测量探头对全机气动阻力增量在9%之内, 俯仰力矩变化在5%之内, 对全机操稳特性的影响不大, 气动外形优化设计基本满足该低空大展弦比无人机的安全飞行技术要求.      

场放大进样-毛细管电泳非接触式电导快速检测蔬菜中草酸

采用场放大进样-毛细管电泳非接触式电导,建立了分离检测蔬菜中水溶性草酸的方法。以25 mmol/L乙酸溶液为电泳运行液,未涂层石英毛细管,负高压分离,电动进样-11 kV×10 s,草酸可在5 min内获得良好分离和灵敏检测,检出限为6μg/L,定量限为20μg/L。日内和日间精度的相对标准偏差(RSD)≤5%。蔬菜样品中共存的常见无机阴离子和有机基质不干扰草酸的测定,样品无需复杂的前处理就可直接进样分析。该方法可用于蔬菜中水溶性草酸含量的检测。     

离子浓度对电纺纤维沉积形态及表面形貌的影响

通过采用传统电纺丝装置(接收板接地或连接负压电源)、逆向电场及非接触式电纺丝装置等4种不同的电纺丝装置,在相同电压、接收距离、纺针直径、温湿度条件下,对20%的聚乙烯醇溶液进行电纺丝实验,观察不同装置中制得的纤维的沉积形态与形貌.还采用ANSYS有限元模拟对电纺丝装置的场强分布进行分析,并引入电化学理论解释了采用不同电纺装置时离子浓度的不同对所得电纺纤维形貌的影响,分析了产生差异的原因.     

Sensitive detection of DNA methyltransferase activity based on rolling circle amplification technology

This work develops a fluorescence approach for sensitive detection of DNA methyltransferase activity based on endonuclease and rolling circle amplification （RCA） technique. In the presence of DNA adenine methylation （Dam） MTase, the methylation-responsive sequence of hairpin probe is methylated and cleaved by the methylation-sensitive restriction endonuclease Dpn 1. The products cleaved by restriction endonuclease Dpn I then function as a signal primer to initiate RCA reaction by hybridizing with the circular DNA template. Each RCA product containing thousands of repeated sequences might hybridize with a large number of molecular beacons （detection probes）, resulting in an enhanced fluorescence signal. In the absence of Dam MTase, neither methylation/cleavage nor RCA reaction can be initiated and no fluorescence signal is observed. The proposed method exhibits a dynamic range from 0.5 U/mL to 30 U/mL and a detection limit of 0.18 U/mL. This method can be used for the screening of antimicrobial drugs and has a great potential to be further applied in early clinical diagnosis.     

液液萃取-场放大进样-毛细管电泳非接触式电导分离检测酱油中的安赛蜜

采用场放大进样（FASI）-毛细管电泳非接触式电导检测法（CE-C⁴D）,结合液液萃取（LLE）的样品净化预处理技术,分离检测了酱油中人工合成甜味剂安赛蜜。酱油样品经酸化后,用乙酸乙酯作为萃取剂,成功地消除了酱油中含有的大量无机盐等复杂基体对微量安赛蜜的干扰。实验对影响LLE萃取效率和FASI-CE-C⁴D分离检测的关键因素进行了讨论,特别是对样品净化前处理过程中萃取剂及用量、样品酸化pH值、萃取时间、萃取温度等条件进行了优化。结果表明,酱油中的安赛蜜可获得良好分离和灵敏检测,检出限和定量限分别为0.15 mg/kg和0.48 mg/kg。对市售酱油样品进行安赛蜜的加标回收测定,得到加标回收率为92.3%~108.1%,相对标准偏差＜8.0%。该法具有简单快速、灵敏高效、分析成本低的优点,能满足酱油中安赛蜜的分析检测要求。     

Non-contact evaluation of the resonant frequency of a microstructure using ultrasonic wave

This paper presents a novel non-contact method for evaluating the resonant frequency of a microstructure, Firstly, the microstructure under test is excited by ultrasonic waves. This excitation method does not impose any undefined load on the specimen like the electrostatic excitation and also this is the first actual use of ultrasonic wave for exciting a microstructure in the literature. Secondly, the amplitudes of the microstructure are determined by image edge detection using a Mexican hat wavelet transform on the vibrating images of the microstructure. The vibrating images are captured by a CCD camera when the microstructure is vibrated by ultrasonic waves at a series of discrete high frequencies （〉30 kHz）. Upon processing the vibrating images, the amplitudes at various excitation frequencies are obtained and an amplitude-frequency spectrum is obtained from which the resonant frequency is subsequently evaluated. A micro silicon structure consisting of a perforated plate （192 × 192 μm） and two cantilever beams （76 × 43 μm） which is about 4 μm thickness is tested. Since laser interferometry is not required, thermal effects on a test object can be avoided. Hence, the setup is relatively simple. Results show that the proposed method is a simple and effective approach for evaluating the dynamic characteristics of microstructures.     

方波激发非接触式电导检测器信噪比的影响因素研究

研制了用于毛细管电泳的方波激发非接触式电导检测器(CCD)并详细考查了对检测器信噪比影响较大的几个重要因素,包括激发频率和运算放大器、基线分压电路和A/D转换器、数字低通滤波;以及常见缓冲体系2-(N-吗啡啉)-乙磺酸/组氨酸(MES/His)体系中电解质浓度,添加剂十六烷基三甲基溴化铵(CTAB)对金属离子的检出信号的影响。所得的结果对于该类检测器的设计和优化具有参考价值。     

X型热膜探头的标定

本文研究了Ｘ型热膜探头的两种主要标定方法，有效角法和多速度偏航法，对两种方法使用时可能引入的误差进行了讨论，并对给定的同一流场用不同方法进行了计算。