S波段低温低噪声放大器的研制

介绍了基于ADS仿真的低噪声放大器的设计与制作方法;重点研究了LNA的直流偏置、稳定性分析、匹配设计、版图制作和调试;提出了源级负反馈和栅极加并联阻抗的方法来实现了电路全频段稳定和低温正常工作。采用ATF-34143制作了中心频率在2.25的低噪声放大器,在77K温度下,该放大器带内输入输出驻波比小于1.2,增益达到23dB,噪声系数为0.24dB。     

影响光孤子传输的因素分析和可能的解决方案

从光孤子传输所满足的非线性薛定谔方程出发,通过对方程中参数的分析和选择,对影响孤子传输的各种因素采用单独分析和综合分析对比方法得到了两个新的结论:(1)二阶色散参数在不太大的范围内变化只会影响脉冲的幅值,对脉冲形状影响不大,而输入脉冲的啁啾则是使脉冲发生畸变的主要原因;(2)在啁啾、三阶色散和五阶非线性同时存在的情况下,它们对脉冲都会产生很大的影响,且存在相互影响和制约关系,三者在某一参数值附近,对脉冲却存在着增益效应和"整容"作用。针对分析结果从理论上提出了改进光孤子传输特性的解决方案,这对光孤子通信的实践过程是有一定实际意义的。     

Analytical self-similar solutions of the Ginzburg-Landau equation with three-order dispersion effect

Based on the technique of the symmetry reduction, we find the asymptotic self-similarity analytical resolutions from the constant coefficient Ginzburg-Landau equation considering both influences of the thirdorder dispersion and gain dispersion on the evolution of pulses. We have obtained the self-similar pulse amplitude function, phase function, strict linear chirp function, and the effective temporal pulse width. Numerical simulations show qualitative agreement with these theoretical results.     

Improving the precision of fluorescence lifetime measurement using a streak camera

Streak camera has high temporal resolution and high sensitivity, and is a powerful tool in biomedical study to measure fluorescence lifetime and perform fluorescence lifetime imaging. However, nonuniformity of the gain in the streak tube and nonlinearity of the sweeping speed limit the precision of fluorescence lifetime measurement, particularly when fluorescence lifetimes are short. We have constructed a two-photon excitation fluorescence lifetime measurement system that is based on a synchroscan streak camera and have developed accordingly a method to correct the effect of gain nonuniformity and nonlinearity of sweeping speed on the measurement precision. A continuous-wave laser of high stability is used to calibrate the gain of the streak camera, and a Fabry-Perot etalon is used to calibrate the nonlinearity of the sweeping speed. Fitting algorithms are used to correct the gain of the streak camera and nonlinearity of the sweeping speed respectively, which significantly improves the measurement precision of the system, as characterized through the fluorescence lifetime of the short-lived fluorescence dye, Rose Bengal. Experimental results show that the measurement fluctuation of the lifetime has been improved from more than 10% to 2% after correcting the effects of gain nonuniformity and sweeping speed nonlinearity.     

知识依赖与动态模糊数据粗传递

根据实际中经常遇到的信息传递情况:一是我们不能丢失任何可能有用的信息,以免造成损失;二是被传递的概念是双向动态变化的模糊数据,三是信息传递者的知识不同,接收到的数据信息不一样。本文利用具有动态特性的双向S-粗模糊集构建了一种新的动态模糊数据粗传递模型-上近似动态模糊数据粗传递模型,分析了信息传递者的知识对模糊数据粗传递的影响,建立了知识依赖、知识等价、知识独立与传递过程中动态模糊数据变化的关系,得到了动态模糊数据在传递过程中保持不变、发生增益的条件,给出了动态模糊粗传递数据不变定理及数据增益定理,最后给出了动态模糊粗传递模型在风险投资管理系统中应用,制定了符合实际的投资决策。动态模糊粗传递是双向S-粗模糊集的一种新的应用。     

带有增益介质层的混合脊状等离子体波导的传输特性

在传统脊状等离子体波导的基础上设计了一种带有增益介质层的新型混合脊状等离子体波导,其结构中的介质层部分包含两个区域:前区为单一介质,后区的脊是由2种介质构成的双层脊区。采用二维时域有限差分方法分析了波导结构的传输特性,得到了TM模下的电场分布图,并对输出功率以及传输损耗与结构参数和介质折射率的变化规律进行了讨论。结果表明,在波导中引入的增益介质材料磷化铟后其损耗达到-6 dB/μm。此种波导结构对于光集成芯片的研究与制作具有重要意义。     

射频驱动下电磁诱导透明窗口的分裂和增益的出现

在Λ型三能级系统的基础上引入两个共振射频场, 通过详细讨论系统的探测吸收特性随两个射频场Rabi频率取不同值时的变化规律, 得出电磁诱导透明(EIT)的分裂规律以及EIT上出现增益现象的产生条件.研究结果表明: 两个射频场对系统所起的控制作用不同, 控制基态精细结构能级之间跃迁的射频场对EIT的分裂起作用, 而控制激发态精细结构能级之间跃迁的射频场不会导致EIT的分裂; 而且, 只有当控制基态精细结构能级之间跃迁的射频场的Rabi频率大于控制激发态精细结构能级之间跃迁的射频场的Rabi频率时, 才能产生EIT与增益相叠加的新特性. 关键词： 射频场 电磁诱导透明 增益 精细结构能级     

形成线脉冲压缩技术在超宽谱技术中的应用

分析了基于同轴Blumlein线的高功率脉冲源对低阻抗短形成线充电、实现脉冲压缩的基本原理,给出了理想情况下,脉冲压缩后输出的高功率超宽谱脉冲电压、功率增益及能量效率计算公式。利用电路仿真软件建立了脉冲压缩电路模型,通过模拟验证了理论分析。模拟了实际主脉冲波形对输出脉冲的影响,结果表明:低阻抗压缩线充电时间变长、充电电压峰值降低;通过在前级脉冲源与脉压形成线之间增加一定长度传输线,可以有效提高压缩线充电电压。针对典型的同轴Blumlein线高功率脉冲源紧凑Tesla型高功率脉冲源CKP-1000,设计了脉冲压缩装置和测量系统,建立了完整的脉冲压缩实验系统,开展了脉冲压缩试验。该脉压系统可将4.5 ns输入脉冲压缩为前沿940 ps、半高宽约1 ns的亚纳秒脉冲,实现了约2.2倍的功率增益。实验数据与理论分析基本吻合。     

基于“又好又快发展”思想的动态综合评价方法

针对不同时段内被评价对象增益的不同,提出了一种基于"又好又快发展"思想的动态综合评价方法.首先依据时序立体数据信息,求出被评价对象的增益水平;然后通过均值相对运算、规范化和一致性运算,定义出各被评价对象各指标在某一时刻的相对发展增益权、均衡发展增益权和可持续发展增益权,并进一步计算综合增益权;最后依据激励思想给出增益权与静态综合评价值的合成规则.通过2006-2010年中部六省三次产业"又好又快发展"水平评价的实例分析,证明了方法的科学性.     

An alternative phase modulator half-wave voltage measurement based on photonic link

We measure the half-wave voltage of LiNbO 3 phase modulators in a 26-GHz wideband frequency range, and then analyze it by the phase modulation photonic peak gain linked to the interferometric demodulation. The optical interferometer is constructed with two 50:50 couplers and two fiber arms with a 1-m difference in fiber length. The photonic link gain peaks are frequency dependent, as indicated by the differential time delay in the interferometer. The procedure described is a new and practical half-wave voltage measurement method that can accurately predict the nonlinear frequency characteristics of the phase modulator. Moreover, the method can be applied to various types of LiNbO 3 phase modulators.