理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

输入输出共轴的三弯曲型TM01-TE11模式转换器

 通过采用相位重匹配技术，设计了一种输入输出共轴的三弯曲型TM₀₁-TE₁₁模式转换器，该转换器由三段常曲率弯曲波导和两段直波导组成。用模式耦合理论建立了该类模式转换器的数值计算和优化设计方法，并设计了一个中心频率为7.0 GHz的模式转换器。该转换器的TM₀₁-TE₁₁转换效率在中心频率上大于99％，在6.5~7.5 GHz的频率范围内大于90％。应用时域有限差分法和有限元方法对所设计的模式转换器进行了仿真，仿真结果验证了设计理论和设计结果。     

双包层椭圆光波导解析解

解析求解了双包层椭圆光纤中的波动方程，得到了模式精确解有模式特征方程。对基模的特征方程进行了数值计算，给出了不同椭圆比下的归一化双折射和模间色散随归一化频率的变化关系曲线，并与高斯近似解的结果进行了比较。     

矩孔金属光栅矢量模式理论的数值计算

根据矩孔金属光栅的矢量模式理论，计算了不同入射方向，波长及偏振态情况下衍射场的分布，研究了不同光栅结构对衍射效率，偏振态变化的影响；同时，根据实际需要，加工制作了一批不同深度的矩孔光栅样品，进行了实验测量，并将计算值与实验值进行了比较，两者基本相符。     

激光推进的基本原理和实验进展综述

激光推进是一种新型的推进模式,按作用机理可分为大气模式激光推进和火箭烧蚀模式激光推进两种。分析了两种推进模式的作用原理,论述了激光推进的最新研究进展。     

奇异类内离差矩阵条件下的Fisher最优判据

特征提取是模式分类与识别的重要环节，Fisher最优判据是特征提取的基本方法之一．本文提出了一种计算奇异类内离差矩阵条件下Fisher最优判据的新方法，并给出了计算步骤．     

Researches of DC—Problem Under the Model S in which the Numbers of Defective Coins are not Fixed

In this paper,we research general Defective Cion Problem under the model S,i.e,the number d of Defective cions is not fixed. For d=O,1,or 2. we get some good results.     

小间隙高放大多丝室及其放电机制

对以强猝灭气体工作的小间隙多丝室及其放电机制进行了研究,实验表明,因为工作在饱和模式区,这种室同时具有很高的气体放大和相当快的时间特性.文中探讨了放电机制,雪崩中空间电荷效应以及电离光子的产生和作用是重要的因素,而其中后一因素又受到强猝灭气体的抑制.     

Fuzzy Entropy： Axiomatic Definition and Neural Networks Model

The measure of uncertainty is adopted as a measure of information. The measures of fuzziness are known as fuzzy information measures. The measure of a quantity of fuzzy information gained from a fuzzy set or fuzzy system is known as fuzzy entropy. Fuzzy entropy has been focused and studied by many researchers in various fields. In this paper, firstly, the axiomatic definition of fuzzy entropy is discussed. Then, neural networks model of fuzzy entropy is proposed, based on the computing capability of neural networks. In the end, two examples are discussed to show the efficiency of the model.     

Decomposition of the Two Lowest Lamb modes in a Bonded Plate

Based on the expression of the dispersion equation of Lame waves in an adhesive two-layered plate pressented in our proevious paper [Chin,Phys,Lett,18(2001)1483],the two lowest Lamb modes,the symmetric mode S0 and the antisymmetric mode A0 are successfully decomposed in the low-frequency regime,Relations between the rigidity of the bond and the velocity of the two Lamb modes are found,which lay a foundation for the estimation of the bond rigidity of the adhesive plate.The influence of the variations of the bond rigidity in terms of the stiffness constants KN and KT of the spring model on the velocity of the two Lamb modes in discussed and numerically evaluated.numerical results indicate that the deterioration of the bond rigidity causes the phase velocity decrease for Lamb modes of the two lowest order,thus having a possibility for the evaluation of the bonding state of the adhesive plate by using ultrasonic wave velocity measurement.