Observations of trends for singular values and eigenvectors from library searching ultraviolet-visible spectra with spectral subtraction

A promising procedure for computerized library searching and identification of ultraviolet-visible spectra for one- and two-component mixtures is evaluated. The procedure is based on singular value decomposition and utilizes band position and shape. Searching more than one library spectrum at a time is possible. Library spectra which have similar spectra (collinear) with the sample and each other are indicated by two measures. First, a large condition index must be obtained, and second, two or more large variance-decomposition proportions in the same row need to be associated with the large condition index. The searching procedure has a significant degree of differentiation between the actual sample and potential candidates and is compared with the dot product, Euclidean distance and the correlation coefficient.     

Analysis of volatile compounds of rosemary honey. Comparison of different extraction techniques

Summary The analysis of the volatile fraction from honey requires the sugar matrix to be separated prior to the analysis by GC-MS. In this study, three extraction techniques, simultaneous extraction-distillation, liquid-liquid extraction and solid-phase extraction, were compared to the extraction of the volatile compounds of a rosemary honey. Analysis of these fractions by gas chromatography—mass spectrometry enabled the tentative identification of up to 122 volatile compounds (alcohols, ketones, aldehydes, acids, esters, terpenes, hydrocarbons, phenol, furan and pyran compounds). SDE extracts were rich in terpenes and esters, while the other two techniques avoided the formation of artefacts due to heating the sample.     

Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.     

Time-dependent mixing and demixing processes in binary lipid monolayers studied by mixed and separate spreading using film pressure and film potential measurements

Using both spreading techniques — mixed spreading and separate spreading- and, simultaneously, film pressure and film potential measurements, the mixing behavior of the following five binary systems was investigated and compared: 1) system 1,2-dilauroyl-phosphatidylethanolamine/cholesterol; 2) system 1,2-dimyristoyl-phosphatidylethanolamine/cholesterol; 3) system 1,2-dipalmitoyl-phosphatidylethanolamine/cholesterol; 4) system Na-eicosyl sulphate/hexadecanol; 5) system phosphatidic acid/1,2-dimyristoyl-phosphatidylethanolamine.Analyzing the time and concentration dependence of the /a isotherms and v/a isotherms (^s = film pressure, v ^s potential,a=average area per molecule in mixed films in the monolayers) of the binary monolayers it can be concluded that the components of the binary systems 1–4 are complete miscible in the monolayers. On the other hand the components of the system 5 are probably partially miscible only.     

A proposal for the molecular basis of μ and δ opiate receptor differentiation based on modeling of two types of cyclic enkephalins and a narcotic alkaloid

Summary The molecular basis underlying the divergent receptor selectivity of two cyclic opioid peptides Tyr-c[N -d-Orn²-Gly-Phe-Leu-] (c-ORN) and [d-Pen², l-Cys⁵]-enkephalinamide (c-PEN) was investigated using a molecular modeling approach. Ring closure and conformational searching procedures were used to determine low-energy cyclic backbone conformers. Following reinsertion of amino acid side chains, the narcotic alkaloid 7-[(1R)-1-methyl-1-hydroxy-3-phenylpropyl]-6,14-endoethenotetrahydro oripavine (PEO) was used as a flexible template for bimolecular superpositions with each of the determined peptide ring conformers using the coplanarity and cocentricity of the phenolic rings as the minimum constraint. A vector space of PEO, accounting for all possible orientations for the C₂₁-aromatic ring of PEO served as a geometrical locus for the aromatic ring of the Phe⁴ residue in the opioid peptides. Although a vast number of polypeptide conformations satisfied the criteria of the opiate pharmacophore, they could be grouped into three classes differing in magnitude and sign of the torsional angle values of the tyrosyl side chain. Only class III conformers for both c-ORN and c-PEN, having tyramine dihedral angles ₁ =–150° ± 30° and ₂=–155° ± 20°, had significant structural and conformational properties that were mutually compatible while respecting the PEO vector space. Comparison of these properties in the context of the divergent receptor selectivity of the studied opioid peptides suggests that the increased distortion of the peptide backbone in the closure region of c-PEN together with the pendant ,-dimethyl group, combine to generate a steric volume which is absent in c-ORN and that may be incompatible with a restrictive topography of the receptor. The nature and stereo-chemistry of substituents adjacent to the closure region of the peptides could also modulate receptor selection by interacting with a charged () or neutral () subsite.     

高纯氧化钇中镧、铈、钐、铝、铅和铜的电感耦合等离子体原子发射光谱法测定

本文以纯Y_2O_3中杂质元素的ICP-AES测定为例,研究用数值微分技术解决光谱干扰同题。结果表明,导数光谱法不仅可以有效地消除来自基体的光谱干扰,还能减小谱线干扰对检测能力的影响。当分析物浓度较低时,导数光谱法的加入回收率明显优于离峰分析法,多数情况下也优于在峰法校正光谱干扰时的回收率。     

Numerical solution of minimax problems of optimal control,part 1

This paper contains general transformation techniques useful to convert minimax problems of optimal control into the Mayer-Bolza problem of the calculus of variations [Problem (P)]. We consider two types of minimax problems: minimax problems of Type (Q), in which the minimax function depends on the state and does not depend on the control; and minimax problems of Type (R), in which the minimax function depends on both the state and the control. Both Problem (Q) and Problem (R) can be reduced to Problem (P).For Problem (Q), we exploit the analogy with a bounded-state problem in combination with a transformation of the Jacobson type. This requires the proper augmentation of the state vectorx(t), the control vectoru(t), and the parameter vector , as well as the proper augmentation of the constraining relations. As a result of the transformation, the unknown minimax value of the performance index becomes a component of the parameter vector being optimized.For Problem (R), we exploit the analogy with a bounded-control problem in combination with a transformation of the Valentine type. This requires the proper augmentation of the control vectoru(t) and the parameter vector , as well as the proper augmentation of the constraining relations. As a result of the transformation, the unknown minimax value of the performance index becomes a component of the parameter vector being optimized.In a subsequent paper (Part 2), the transformation techniques presented here are employed in conjunction with the sequential gradient-restoration algorithm for solving optimal control problems on a digital computer; both the single-subarc approach and the multiple-subarc approach are discussed.This research was supported by the National Science Foundation, Grant No. ENG-79-18667, and by Wright-Patterson Air Force Base, Contract No. F33615-80-C3000. This paper is a condensation of the investigations reported in Refs. 1–7. The authors are indebted to E. M. Coker and E. M. Sims for analytical and computational assistance.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Outer product analysis of electronic nose and visible spectra: application to the measurement of peach fruit characteristics

Visual aspect and aroma are among the most important features of fruit that determine consumer preferences. Electronic nose and spectroscopic techniques have shown positive results in evaluating some basic analytical parameters of fruit and global features such as the cultivar.In this paper, we illustrate and discuss a study aimed at evaluating the improvement derived by the fusion of visible spectra and electronic nose data. These experiments were performed on a population of yellow peaches belonging to two cultivars. Each sample was measured by visible optical spectroscopy and by electronic nose. In addition, a number of reference parameters were also measured by conventional destructive methodologies.Collected data were analysed individually and then fused together in order to classify the two cultivars and to estimate the reference parameters. Data fusion was performed building the outer product matrix for each measurement. The set of matrices was then successively unfolded and analysed by conventional chemometrics tools.Results were improved using outer products, for instance in classification average percentage errors of 25, 10, and 7 for electronic nose, spectra, and outer product, respectively was achieved. Regression analysis provides the evidence of a substantial orthogonal appearance of the datasets, which offer former hidden information on fruit classification.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.