pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

环状高分子对胶体稳定性影响的理论研究

将改进的基本度量理论与热力学微扰理论相结合,提出了胶体/高分子系统排空相互作用的IRDFT理论。该理论解释了在实际胶体系统中起重要作用的排斥体积效应和高分子链内相关性的竞争机制。应用该IRDFT,分别以线性链状和环状结构的高分子及其单体为排空元,计算了不同排空元条件下的胶体间排空相互作用。研究表明:对于絮凝破坏,自由环状高分子具有更大的优势。     

四苯基卟啉在改性磷酸锆层间的插入及荧光增强

近年来,出于节约一次性能源的考虑,人们已经加大对太阳能等天然资源的利用,致力于模拟天然光合作用的研究[1￣3],而光合作用中的捕光复合物又称为光子天线。光子天线中往往存在一种或几种猝灭剂,猝灭剂吸收光子后产生激发态的能量可以在不同分子或者同一分子的不同生色团之间转移,转移出能量的一方为能量给体,另一方为能量受体。     

THE SOLID STATE REACTIONS AND TRANSITIONS IN HIGH POLYMERIC SYSTEMS Ⅲ. THE BULK CRYSTALLIZATION OF LANTHANIDECATALYTICALLY POLYMERIZED POLYDIENES

For the mechanism of isothermal bulk crystallization of high polymers, beside the nucleation and growth steps, the unimpingement of growing crystal aggregates should be taken into account for the modification of the Avrami equation. Starting from Poisson distribution function of growing crystal aggregates, the probability of the unimpinging ones should be P(0)+P(1), then the Q-modified Avrami equation thus derived can be expressed aswhere V0 represents the volume fraction of crystal aggregates at crystallization time t at a given temperature, while the exponent n on t relates to the mode of nucleation and growth, and K_q is the corresponding shape factor. This Q-modified one is verified satisfactory by the isothermal bulk crystallization of lanthanidecatalytically polymerized polybutadiene (Ln-PB), polyisoprene (Ln-PIR) and their copolymers (LnPB/IR). Furthermore, the proposed mechanism is well identified by the change of morphological state during the course of crystallization of the corresponding east film of Ln-PB TR (92/8) at-60°(Fig. 1).Upon examination of the influence of the number of entanglement on crystallization rate, it reveals the existence of two stages of entanglementation, the primary and the secondary ones (Fig. 19)The equation for dependence of molecular weight and entanglement on bulk crystallization rate has been derived as Eq. 13 or 18 for Ln-PB, and verified by the experimental rate data of well fractionated Ln-PB samples crystallized at -9.1 to -15℃(Fig.20).     

CROSS-LINKING OF AROMATIC POLY（THIOETHER）S

A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

CoTiO3纳米粉体的合成及其对MnO2电极材料的改性作用

采用溶胶-凝胶法制得钙钛矿型CoTiO₃纳米粉体，借助XRD、TEM以及循环伏安测试对其性质进行了表征。不同量的所制样品用于MnO₂电极的物理掺杂，进行了深度恒流放电、循环伏安和充放电测试。结果表明在40%KOH电解质溶液中，样品掺杂量为5%时改性效果较好。纳米CoTiO₃参与了电极反应，抑制了电化学惰性物质Mn₃O₄的生成，从而有效地改善MnO₂的放电性能，放电容量较I.C     

壳聚糖共价键合化学修饰电极测定亚硝酸根

用共价键合法把壳聚糖修饰在玻碳电极表面,研究了NO-2在修饰电极上的阳极溶出伏安特性.实验结果表明:修饰电极在0.1 mol/L NaNO3(pH 2.60)底液中对NO-2有良好的吸附性和选择性,其峰电流与NO-2的浓度在1.5×10-6～1.0×10-3 mol/L范围内呈较好的线性关系;检测限可达2.0×10-7 mol/L.将壳聚糖修饰电极应用于雨水、湖水中NO-2的测定,结果满意.     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.