反气相色谱法测定有机溶剂型木质素的溶解度参数

采用反气相色谱法(IGC),于333.15～373.15 K温度范围内测定了有机溶剂型木质素的溶解度参数(δ2)及相关指标。以正辛烷(n-C8)、正癸烷(n-C10)、正十二烷(n-C12)和正十四烷(n-C14)为探针溶剂,计算了探针溶剂的特性保留体积(V0g)、摩尔吸收焓(ΔHs1)、无限稀释摩尔混合焓(ΔH∞1)、摩尔蒸发焓(ΔHv)、无限稀释活度系数(Ω∞1)以及探针溶剂与有机溶剂型木质素的Flory-Huggins相互作用参数(χ∞12)。结果表明,上述4种探针溶剂在测定的温度范围内均为有机溶剂型木质素的不良溶液;在同一温度下,参数χ∞12随着探针溶剂碳数的增加而降低。测得的有机溶剂型木质素的δ2为19.03 (J\5cm-3)1/2。     

反气相色谱法测定离子液体1-己基-3-甲基咪唑三氟甲磺酸盐的热力学参数

采用反气相色谱法研究了343.15~373.15 K温度范围内离子液体1-己基-3-甲基咪唑三氟甲磺酸盐([HMIM]OTF)的热力学参数。根据18种探针溶剂的保留时间计算出探针溶剂与[HMIM]OTF之间的摩尔吸附焓、无限稀释的摩尔混合焓、摩尔蒸发焓、质量部分活度系数、Flory-Huggins相互作用参数及[HMIM]OTF的溶解度参数。结果表明,所选溶剂中正构烷烃、四氢呋喃、乙醚、环己烷和苯为[HMIM]OTF的不良溶剂;二氯甲烷、丙酮、氯仿、乙酸乙酯、四氯化碳、乙酸甲酯、甲苯和甲醇为[HMIM]OTF的良溶剂;运用外推法得到了室温(298.15 K)时[HMIM]OTF的溶解度参数为20.74 (J/cm³)^0.5。本研究为离子液体的应用及相关工作提供了参考。     

基于GIS与灰色关联分析的水位方案综合评价模型

通过分析传统方法在方案形成与指标获取方面的不足,综合应用GIS与灰色关联分析,构建了顾及方案形成与指标获取的正常蓄水位优选综合评价模型,并提出了基于GIS的方案指标获取方法.针对现有灰色关联模型对不同评价尺度指标分开处理的局限,改进了灰色关联度分析模型,并引入了相对理想度的概念.通过逆向指标正向化,将正常蓄水位方案矩阵转换为理想度矩阵,使不同量纲的指标数据经归一化后具有相同的评价尺度,从而为关联度计算提供可靠的数据.最后,通过实例证明了GIS方法的可操作性和综合评价模型的正确性.     

Synthesis and Photocatalytic Property of ZnO/TiO2 Inverse Opals Films with Controllable Composition and Topology

A novel method to fabricate composition- and topology-controlled ZnO/TiO₂ inverse opals (IO) films using a positive sacrificial ZnO IO template has been developed. This method includes a two-step process, preparation of ZnO IO by a simple electrochemical deposition using a self-assembly polystyrene colloidal crystal template and preparation of ZnO/TiO₂ IO by a liquid phase deposition (LPD) process at room temperature. The composition and topology of ZnO/TiO₂ IO can be easily controlled by changing the duration of the LPD. After 20 min LPD process, a ZnO/TiO2 composite IO with non-close-packed face-centered cubic air sphere array was obtained. Prolonging the duration to 60 min, a pure TiO₂ IO (TIO-LPD60) with obviously thickened walls was formed. The formation mechanism for the compositional and topological variation was discussed. A preliminary study on UV photocatalytic property of the samples for degradation of methylene blue reveals that the composition and topology significantly influenced the photocatalytic activity of the IO film. The ZnO/TiO₂ composite IO demonstrates a higher degree of activity than both pure ZnO and pure TiO₂ IO, although they have a similar IO wall thickness. Moreover, with increasing IO wall thickness from ～52 nm to ～90 nm, TIO-LPD60 exhibits the highest level of photocatalytic performance.     

反相气相色谱法探究铜镁铝水滑石的表面性质

采用共沉淀法合成了Cu_xMg_3-xAl-LDHs (x＝0～3), 利用FTIR 及IGC 法(反相气相色谱法)对合成的样品进行测试和表征, 并结合计算机模拟的结果来探讨铜镁铝水滑石的表面性质. 结果表明, 随 Cu²⁺含量的增加, 铜镁铝水滑石表面吸附自由能及表面能色散组分增加, 稳定性下降, 这可能由于Cu²⁺本身具有的Jahn-Teller 畸变会很大程度地影响层板的稳定性, 导致含铜水滑石体系的稳定性降低; 随着Cu²⁺含量的增加, 水滑石表面碱性先减小后增大.     

A Compton scattering image reconstruction algorithm based on total variation minimization

Compton scattering imaging is a novel radiation imaging method using scattered photons.Its main characteristics are detectors that do not have to be on the opposite side of the source,so avoiding the rotation process.The reconstruction problem of Compton scattering imaging is the inverse problem to solve electron densities from nonlinear equations,which is ill-posed.This means the solution exhibits instability and sensitivity to noise or erroneous measurements.Using the theory for reconstruction of sparse images,a reconstruction algorithm based on total variation minimization is proposed.The reconstruction problem is described as an optimization problem with nonlinear data-consistency constraint.The simulated results show that the proposed algorithm could reduce reconstruction error and improve image quality,especially when there are not enough measurements.     

On the validity of planar, thick curved beam models derived with respect to centroidal and neutral axes

Most dynamic analyses of planar curved beams found in the literature are carried out based on a curved beam model which assumes that the neutral axis coincides with the centroidal axis of the curved beam. This assumption leads to governing equations of motion which are relatively simple with analysis results that have acceptable accuracy for shallow curved beams. However, when a curved beam is not shallow and/or its cross section is not doubly symmetric, the offset distance between the neutral and centroidal axes may be large enough to influence the in-plane dynamics of the curved beam even for small motion. In this paper, the validity of this underlying assumption for modeling a linear curved beam is examined. To this end, two sets of equations of motion governing the in-plane dynamics of a planar curved beam are derived, in a consistent manner for comparison, based on the linear strain-displacement relations and Hamilton’s principle. The first set of equations is derived from the displacement components measured with reference to the neutral axis of the curved beam while the second set is derived with respect to the centroidal axis of the cross section. The curved beam is considered extensional and the effects of rotary inertia and radial shear deformation are included. In addition to the curvature parameter that characterizes the wave motion for both curved beam models, an eccentricity parameter is introduced in the first model to account for the offset between the neutral and centroidal axes. The dynamic behavior predicted by each curved beam model is compared in terms of the dispersion relations, frequency spectra, cutoff frequencies, natural frequencies and modeshapes, and frequency responses. In order to ensure that the comparison is accurate, the wave propagation technique is applied to obtain exact wave solutions. It is shown that, when the curvature parameter is not small, the underlying assumption has a substantial impact on the accuracy of the linear dynamic analysis of a curved beam.     

PECULIARITIES OF IRREVERSIBLE STRAINING IN STEP-WISE LOADING, REVERSE AND INVERSE CREEP

The paper is concerned with the generalization of synthetic theory to the modeling of phenomena such as the Bauschinger negative effect,creep delay,reverse and inverse creep.Detailed calculations of pl...     

SHEAR-HORIZONTAL WAVES IN A ROTATED Y-CUT QUARTZ PLATE WITH AN ISOTROPIC ELASTIC LAYER OF FINITE THICKNESS

We study shear-horizontal (SH) waves in a rotated Y-cut quartz plate carrying an isotropic elastic layer of finite thickness.The three-dimensional theories of anisotropic elasticity and isotropic elast...     

圆柱壳的塑性膨胀和变形

根据材料不可压缩假设,适当选取材料塑性本构关系,将圆柱壳塑性膨胀运动简化为以圆柱壳内 半径为因变量的常微分方程初值问题。对3种初始内外半径比纯铜厚壁圆柱壳膨胀过程的计算表明,应变率 硬化阻碍圆柱壳的塑性膨胀运动,应变硬化和温度效应的影响可以忽略,而与圆柱壳的厚度无关。