同轴周期慢波结构色散特性的通用数值解法

 运用场匹配法和傅里叶级数理论,提出一种原则上可数值求解任意同轴周期慢波结构色散特性的方法,给出了同轴慢波结构TM_0n模的色散方程。基于该方法,编制了Matlab程序,给出了同轴波纹波导和同轴双波纹波导色散特性,以算例形式分析计算了同轴盘荷波导的色散特性。数值计算结果与多维全电磁模拟软件结果进行比较,证明了该数值算法的准确性和可靠性。     

脉冲激光入射下介质薄膜双频互相关散射截面及功率展宽

 结合特殊的镀金聚酯薄膜表面的粗糙度和半球反射率,依据基尔霍夫近似及粗糙面脉冲散射互相关函数,数值计算了脉冲激光（1.06 μm）在不同入射角照射下该材料薄膜双频互相关散射截面随相干带宽频差和散射角的变化情况。并给出δ脉冲和高斯脉冲波入射下,其散射功率随时间和散射角的波形分布。计算结果表明：该薄膜材料激光双频互相关散射截面在镜反射方向有最大的散射峰值,在非镜反射方向上,其散射值随相干带宽频差的增大迅速减小,当窄脉冲垂直入射时,粗糙面散射功率展宽现象明显。     

高功率微波器件2.5维通用粒子模拟软件——尤普

 利用体积加权宏粒子模型,考虑了阴极形状的爆炸电子发射模型、散度校正完全匹配层边界等新型和改进型电磁粒子模拟算法模型,提高了粒子模拟算法的计算精度,并有效降低数值噪声。在此基础上开发出2.5维全电磁通用粒子模拟软件——尤普,可在x-y,z-r和r-φ3种坐标系下应用于高功率微波器件的2.5维数值模拟研究和结构设计。对相对论磁控管、磁绝缘线振荡器和虚阴极振荡器等高功率微波器件的模拟结果表明：尤普软件得到了正确的物理图像和物理规律。     

一种大功率窄脉冲半导体激光器测试台的研制

大功率窄脉冲半导体激光器主要光电性能参数为:输出峰值光功率、阈值电流、正向电压、上升时间、峰值波长、光谱半宽、半强度角.根据激光制导系统对大功率窄脉冲激光器参数的特殊测试要求,研制一种大功率窄脉冲激光器测试平台,将小型化大功率激励器功放模块、大范围可调DC-DC模块、信号源板、激光器座、光学准直镜集成在一个平台上,与峰值功率计、光谱仪、CCD摄像机等仪器配合,可测出大功率窄脉冲激光器的峰值功率、峰值波长及波长随温度变化的漂移特性、发光芯均匀性等参数.介绍了大功率窄脉冲激光器测试台的特点,并对测试结果作了论述.     

直接空冷凝汽器理论最佳背压的研究

为了更好地提高直接空冷机组系统运行的经济性,本文以直接空冷系统为研究对象,以空冷系统的热力模型为基础,综合考虑汽轮机功率与空冷风机耗功率,从理论上探索研究运行工况下的最佳背压以及有关主要因素对最佳背压影响的基本规律,从而为直接空冷机组的冷端优化和经济运行提供指导.     

Performance of a 4×10 Gbit/s optical time domain multiplexed system using SMZ switching

Optical time division multiplexing (OTDM) is emerging and promising alternative for future high-speed photonic networks because of its ability to accommodate higher bit rate and flexible bandwidth. Among other factors the performance of an OTDM system largely depends upon the switching characteristics of a de-multiplexer (DEMUX). Symmetric Mach-Zehnder (SMZ) have been found to be most suitable than all the available de-multiplexing switches because of compact size, thermal stability, and low power operation. In this paper, we simulate four-channel OTDM systems (all channel multiplexer (MUX) and DEMUX) with a Mach-Zehnder modulator and SMZ DEMUX to investigate the impact of signal power, pulse width and control signal power on BER.     

Measuring derived acoustic power of an ultrasound surgical device in the linear and nonlinear operating modes

Objective and motivationThe method for measuring derived acoustic power of an ultrasound point source in the form of a sonotrode tip has been considered in the free acoustic field, according to the IEC 61847 standard. The main objective of this work is measuring averaged pressure magnitude spatial distribution of an sonotrode tip in the free acoustic field conditions at different electrical excitation levels and calculation of the derived acoustic power at excitation frequency (f₀ ≈ 25 kHz). Finding the derived acoustic power of an ultrasonic surgical device in the strong cavitation regime of working, even in the considered laboratory conditions (anechoic pool), will enable better understanding of the biological effects on the tissue produced during operation with the considered device.Experimental methodThe pressure magnitude spatial distribution is measured using B&;K 8103 hydrophone connected with a B&;K 2626 conditioning amplifier, digital storage oscilloscope LeCroy Waverunner 474, where pressure waveforms in the field points are recorded. Using MATLAB with DSP processing toolbox, averaged power spectrum density of recorded pressure signals in different field positions is calculated. The measured pressure magnitude spatial distributions are fitted with the appropriate theoretical models.Theoretical approachesIn the linear operating mode, using the acoustic reciprocity principle, the sonotrode tip is theoretically described as radially oscillating sphere (ROS) and transversely oscillating sphere (TOS) in the vicinity of pressure release boundary. The measured pressure magnitude spatial distribution is fitted with theoretical curves, describing the pressure field of the considered theoretical models. The velocity and displacement magnitudes with derived acoustic power of equivalent theoretical sources are found, and the electroacoustic efficiency factor is calculated. When the transmitter is excited at higher electrical power levels, the displacement magnitude of sonotrode tip is increased, and nonlinear behaviour in loading medium appears, with strong cavitation activity produced hydrodynamically. The presence of harmonics, subharmonics and ultraharmonics as a consequence of stable cavitation is evident in the averaged power spectral density. The cavitation noise with continuous frequency components is present as a consequence of transient cavitation. The averaged pressure magnitude at the frequency components of interest (discrete and continous) in the field points is found by calculating average power spectral density of the recorded pressure waveform signal using the welch method. The frequency band of interest where average power spectral density is calculated is in the range from 15 Hz up to 120 kHz due to measurement system restrictions. The novelty in the approach is the application of the acoustic reciprocity principle on the nonlinear system (sonotrode tip and bubble cloud) to find neccessary acoustic power of the equivalent acoustic source to produce the measured pressure magnitude in the field points at the frequency components of interest.ResultsIn the nonlinear operating mode, the ROS model for the considered sonotrode tip is chosen due to the better agreement between measurement results and theoretical considerations. At higher excitation levels, it is shown that the averaged pressure magnitude spatial distribution of discrete frequency components, produced due to stable cavitation, can be fitted in the far field with the inverse distance law. The reduced electroacoustic efficiency factor, calculated at excitation frequency component as ratio of derived acoustic power with applied electrical power, is reduced from 40% in the linear to 3% in the strong nonlinear operating mode. The derived acoustic power at other frequency components (subharmonic, harmonic and ultraharmonic) is negligible in comparison with the derived acoustic power at excitation frequency.Discussion and conclusionsThe sonotrode tip and loading medium are shown in the strong cavitation regime as the coupled nonlinear dynamical system radiating acoustic power at frequency components appearing in the spectrum. The bubble cloud in the strong nonlinear operating mode decreases the derived acoustic power significantly at the excitation frequency.     

幂强化材料和超弹性材料组合球体中孔穴的动态生成

在简单加载条件下,研究幂强化材料和超弹性材料组合球体中的动态孔穴生成和增长问题,首先在有限变形动力学的框架下建立了相应的非线性数学模型,得到了应力的表达式,利用变量变换的方法求得了外加载荷和孔穴半径之间的一个精确的微分关系式,证明了当突加载荷超过其临界值时,球体内部有孔穴的突然生成,并随时间呈现非线性的周期振动．通过数值计算,分析了材料参数和球体的半径比对孔穴生成和增长的影响,并与相应的静态结果进行了比较．结果发现,惯性力的影响降低孔穴生成的临界载荷,而且材料的塑性对孔穴生成和增长有明显的影响．     

刚性块轴向撞击杆的弹塑性动力屈曲

用特征线法分析了刚性块轴向撞击弹塑性直杆时应力波传播的全过程,得到了杆冲击端与固定端应力的变化规律及刚性块与杆首次分离的时间．基于能量原理,考虑了弹塑性应力波的传播与反射,建立了弹塑性杆在刚性块轴向撞击下的横向扰动方程,给出了问题的级数解,由解的稳定性得到了发生屈曲时的临界条件;通过数值计算和分析,给出了临界速度与冲击质量、线性强化模量及临界时间间的关系．     

多孔硅拉曼光谱随激发功率变化的研究

用阳极氧化法新制备了多孔硅样品,以457．5nm固体激光器为激发光源,在不同激发功率下,获得了拉曼谱图和一些谱峰参量随激光功率的变化关系。解释了520cm^-1和300cm^-1附近拉曼峰随功率变化的一系列可逆的实验现象：随激光功率升高出现的红移和非对称性展宽,主要是由于样品局域平均粒径变小而受量子限域效应的影响导致的;样品局域平均粒径在表面上的二维减小与随激光功率升高而导致的局域温升并不违背基本的热力学定律;高功率时520cm^-1附近双峰的出现是由于多孔硅样品局域平均粒径达到一定阈值而导致的纵模和横模双声子模的分裂。