宽带膜厚实时监控过程中膜层折射率的确定方法

为了准确计算出镀膜过程中每层膜的折射率，介绍了实时监控过程中确定膜层折射率的2种方法：一种是由实测的透射比光谱直接反算出膜层的折射率；另一种是用最小二乘法的优化算法实时拟合折射率。试验结果表明：在线反算适合单点监控，所得折射率误差小于2%。然而在实际镀膜过程中,由于宽带内膜层参数误差较大,一般大于25%。为此，采用最小二乘法拟合，即在整个宽光谱范围内采集每个波长点的信息，所得结果误差很小，一般都在2％～5%之间,有时可达到10%,在很大程度上提高了实际镀膜时膜厚监控的精度。     

相变光盘介电薄膜ZnS-SiO2 的微结构和光学特性

采用射频磁控溅射法制备了ZnS-SiO₂ 介电薄膜,利用透射电镜和椭偏仪研究了溅射条件对ZnS-SiO₂薄膜微结构和折射率n的影响.研究表明,ZnS-SiO₂薄膜中存在微小晶粒,大小为2～10 nm的ZnS颗粒分布在SiO₂基体中,当溅射功率和溅射气压变化时,ZnS-SiO₂薄膜的微结构和折射率n发生显著变化,微结构的变化是导致折射率n变化的主要原因,通过优化溅射条件可以制备适用于相变光盘的高质量ZnS-SiO₂介电薄膜.     

Extremes of deterministic sub‐sampled moving averages with heavy‐tailed innovations

Let {X_k}_k?1 be a strictly stationary time series. For a strictly increasing sampling function g:?→? define Y_k=X_g(k) as the deterministic sub‐sampled time series. In this paper, the extreme value theory of {Y_k} is studied when X_k has representation as a moving average driven by heavy‐tailed innovations. Under mild conditions, convergence results for a sequence of point processes based on {Y_k} are proved and extremal properties of the deterministic sub‐sampled time series are derived. In particular, we obtain the limiting distribution of the maximum and the corresponding extremal index. Copyright © 2003 John Wiley & Sons, Ltd.     

Index Heuristics for Multiclass M/G/1 Systems with Nonpreemptive Service and Convex Holding Costs

We consider the optimal service control of a multiclass M/G/1 queueing system in which customers are served nonpreemptively and the system cost rate is additive across classes and increasing convex in the numbers present in each class. Following Whittle's approach to a class of restless bandit problems, we develop a Langrangian relaxation of the service control problem which serves to motivate the development of a class of index heuristics. The index for a particular customer class is characterised as a fair charge for service of that class. The paper develops these indices and reports an extensive numerical investigation which exhibits strong performance of the index heuristics for both discounted and average costs.     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

求线性规划初始可行基的新方法

本文提出一个求线性规划初始可行基的新算法，该算法不仅避免了人工变量，而且理论分析及初步的数值实验结果表明其效率更高。     

组合DEA方法与成熟度模型对项目效益的评价

为全面考虑资金、管理决策能力等因素对项目效益的影响，本运用数据包络分析与项目成熟度模型结合的方法来对企业各个项目之间的相对效益进行评价，应用结果表明该评价方法对于企业资源的最优配置、提高总体效益是十分有用的。     

基于遗传算法和指标满意度求解的第三方物流企业物流中心选址方法

本利用AHP和模糊综合评价法评价物流中心选址的定性指标、用量化选址模型结合遗传算法计算定量指标，再藉助指标满意度求解把定性和定量的指标进行综合，从而为决策对物流中心选址做出科学的决策提供支持。     

Poincaré-Hopf inequalities

In this article the main theorem establishes the necessity and sufficiency of the Poincaré-Hopf inequalities in order for the Morse inequalities to hold. The convex hull of the collection of all Betti number vectors which satisfy the Morse inequalities for a pre-assigned index data determines a Morse polytope defined on the nonnegative orthant. Using results from network flow theory, a scheme is provided for constructing all possible Betti number vectors which satisfy the Morse inequalities for a pre-assigned index data. Geometrical properties of this polytope are described.