软X射线显微术Si_3N_4薄膜窗口的研制

介绍了在软Ｘ－射线显微术研究领域中有重要应用的Ｓｉ_３Ｎ_４薄膜窗口的实验室制作方法，并形成一套独特制备工艺，Ｓｉ_３Ｎ_４薄膜窗口的研制成功推动了我国软Ｘ射线显微术研究的发展。     

软珊瑚Sinularia sp.中次生代谢产物的结构鉴定

细胞毒性;软珊瑚Sinularia sp.中次生代谢产物的结构鉴定     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

香蕉组织膜草酸电极的研究

将香焦组织与氧电极偶合,制成了草酸生物组织电极。在静态和流动条件下,测得电极的线性响应范围分别为8.8×10~(-5)～6.3×10~(-4)mol/L和5.0×10~(-5)～1.8×10~(-3)mol/L,二者的相关系数均为0.9998。研究了介质条件、pH、温度、流速、取样量和固定化等条件的影响。测定了电极的选择性和使用寿命等性能。计算了该实验条件下酶反应的米氏常数。采用静态法和流动注射法测得7份草酸标液的平均回收率分别为98.4％和98.9％。电极已用于一些食品中草酸的测定,所得结果与文献报道基本一致。     

Different protein expression of myocardium from Chinese mini-swine model of myocardial infarct

High-resolution two-dimensional gel electrophoresis (2-DE), followed by computer-assisted image analysis was used to screen protein patterns of normal and infarcted myocardial tissues for quantitative and qualitative differences in protein expression. In the gels of pH 5–8 immobilized pH gradient (IPG) strips, 851 protein spots were detected in normal myocardial tissue and 1 032 protein spots were resolved in infarcted myocardial tissue. Thirteen protein spots only expressed in normal myocardial tissue, and 14 protein spots only expressed in infarcted myocardial tissue. Results also showed that 49 protein spots displayed quantitative changes in expression between normal and infarcted myocardial tissue. Eleven protein spots were subjected to mass spectrometry (MS) analysis and seven proteins were identified by peptide mass fingerprinting (PMF). These proteins may be involved in cardiovascular injury, and could play an important role in the treatment of coronary heart disease. __________ Translated from Chemical Journal of Chinese Universities, 2006, 8(27): 1467–1471 [译自: 高等学校化学学报]     

低热-高压法制备PLGA多孔支架及其体外降解研究

采用低热-高压法制备了聚(dl-丙交酯／乙交酯)75／25(PLGA75／25)组织工程多孔支架。该方法避免了使用有机溶剂，支架的孔隙率在90％以上，孔径大小分布均匀。多孔支架经过酒精处理后，支架表面产生许多微小的凹陷；用藻酸钙改性处理后，支架形态保持良好。两种处理都使支架的压缩强度有所增大，亲水性增强。虽然孔隙率高的支架降解速率稍慢，但其体外降解规律基本一致：特性粘数争力学强度衰减快，而质量损失较慢，降解6周后，支架的质量损失仅为3％左右；体外降解3周后，支架的形态保持良好，可望在细胞移植争组织修复的早期发挥支撑作用。     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

薄层扫描法测定冬眠过程中刺猬活性组织酶的周期变化

薄层扫描法测定冬眠过程中刺猬活性组织酶的周期变化冯金城（天津师范大学天津３０００７４）孙金生（天津水产研究所天津３００２２１）１前言为了跟踪观察刺猬在冬眠过程中体内乳酸脱氢酶的周期性变化，利用薄层扫描仪测定了其相关的组织同工酶的差异。实践证明，此法简...     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

二价金属离子萃取速率常数与软硬酸碱规则

用上升液滴法测定了２－乙基己基膦酸单（２－乙基己基）酯－正辛烷从硝酸介质中萃取镁、钙、锌、镍、铜和铅等二价金属离子的正向初始速率，建立了速率方程，计算出正向萃取反应的速率常数、活化能及活化熵，首次将软硬酸碱规则与金属溶萃取速率常数关联。结果表明，在萃取机理相同时，萃取速率常数的大小与金属离子的软硬酸碱标度一致，即萃取过程中，作为酸的被萃取金属离子，其硬度越大，萃取速率常数亦越大，萃取反应的活化能…