考虑密封的悬臂转子系统的裂纹故障分析

以双盘悬臂立式转子-轴承系统为研究对象，建立了系统运动微分方程，并用数值方法分析了在非线性密封力和非线性油膜力作用下的裂纹转子的动力学特性。分析表明，在一定深度裂纹下，转子系统响应随不同角频率比表现出复杂的非线性现象，出现了周期k运动、拟周期运动和混沌运动等多种运动形式。在一定角速度时，工作在远离临界角速度区的转子系统对裂纹非常敏感，而工作在近临界角速度区的转子系统对裂纹不是特别敏感，但是裂纹对它的运动状态影响较大。该研究结果为该类转子-轴承系统的安全运行与故障诊断提供了一定的理论参考。     

Simulation of crack spacing using a reinforced concrete model with an internal length parameter

Summary A gradient-enhanced smeared crack model and bond-slip interface elements are utilized in finite element simulations of reinforced concrete. The crack model is rooted in an enhanced plasticity theory. It uses the Rankine failure surface dependent on an equivalent inelastic strain measure as well as on its Laplacian. As a result, finitely sized fracture process zones and realistic crack spacings are obtained. A reinforced concrete bar in uniaxial tension is analyzed to demonstrate the regularizing influence of the internal length parameter in the model and to evaluate the influence of the model parameters on the energy dissipation in multiple cracks. A comparison of numerical simulations with experimental results for a beam without shear reinforcement in four-point bending concludes the analysis. Received 4 November 1997; accepted for publication 23 April 1998     

Mode-3 spontaneous crack propagation along functionally graded bimaterial interfaces

The effects of combining functionally graded materials (FGMs) of different inhomogeneous property gradients on the mode-3 propagation characteristics of an interfacial crack are numerically investigated. Spontaneous interfacial crack propagation simulations were performed using the newly developed spectral scheme. The numerical scheme derived and implemented in the present work can efficiently simulate planar crack propagation along functionally graded bimaterial interfaces. The material property inhomogeneity was assumed to be in the direction normal to the interface. Various bimaterial combinations were simulated by varying the material property inhomogeneity length scale. Our parametric study showed that the inclusion of a softening type FGM in the bimaterial system leads to a reduction in the fracture resistance indicated by the increase in crack propagation velocity and power absorbed. An opposite trend of increased fracture resistance was predicted when a hardening material was included in the bimaterial system. The cohesive tractions and crack opening displacements were altered due to the material property inhomogeneity, but the stresses ahead of the cohesive zone remained unaffected.     

两种正交异性材料界面上裂纹冲击后的动态响应

本文研究了两种不同正交异性材料界面半无限长裂纹，在冲击荷载下的动态弹塑性响应。通过积分变换，Ｗｉｅｎｅｒ－Ｈｏｐｆ方法和Ｃａｇｎｉａｒｄ－ｄｅＨｏｏｐ反演围通技术，求得一般解析解，获得了该裂纹的动应力强度因子；通过采用Ｄｕｇｄａｌｅ模型，建立了裂纹尖端塑性区延伸速度与裂纹扩展速度的关系，以及动态ＣＯＤ与裂纹扩展速度的关系。     

Numerical solution of a singular integral equation arising in a cruciform crack problem

A singular integral equation arising in a cruciform crack problem is investigated in the present paper. Based on the convex technique, the piecewise Taylor-series expansion method is extended by introducing a weight parameter. An approximate solution of the singular integral equation is constructed and its convergence and error estimate are made. The variations of the approximate solutions associating with stress intensity factors are analyzed by considering internal pressures of power and sine functions, respectively. By comparing with the known methods, the observations reveal that a good approximation can be achieved using less derivative times, less discretization points, and a suitable weight parameter. The obtained results show that the crack growth is dependent on applied mechanical loadings.     

一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题

依据一维六方准晶压电材料反平面问题的基本方程,利用复变函数方法,通过引入适当的保角映射,研究了一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题,并利用Cauchy积分理论,得到电不可通和电可通边界条件下的应力场和位移场的复表示以及裂纹尖端场强度因子的解析表达式.     

A DECAGONAL QUASICRYSTAL WITH AN ARC-SHAPED CRACK

A decagonal quasicrystal,which is weakened by an arc-shaped crack penetratingthrough the solid in the period direction,and which is subjected to remote uniform phonon stresses,is investigated by applying the complex variable method which is just developed by the authors.It is found that the phonon and phason stresses near the crack tips exhibit inverse square rootsingularities.The four complex stress functions characterizing the phonon and phason fields arederived.Explicit expressions for the phonon and phason stress intensity factors,crack openingdisplacements and energy release rate are also presented.     

Three-Dimensional Dynamic Contact Problem for an Elliptic Crack Interacting with a Normally Incident Harmonic Compression–Expansion Wave

The paper deals with the three-dimensional dynamic problem for an elliptic crack interacting with a normally incident harmonic compression–expansion wave, considering the contact interaction of the crack faces. An asymmetric solution is obtained using an iteration algorithm developed earlier. Numerical results are presented     

V型缺口裂端的三维应力状态及约束分析

利用三维有限元方法，研究了有限厚度板中V型缺口根部穿透裂纹前沿的三维弹性应力场。对不同厚度、不同缺口张开角和裂纹长度对应力强度因子及裂尖附近的三维约束程度的影响进行了分析，同时还讨论了三维约束区的大小。研究结果显示：当缺口张开角小于60度时，不同缺口的应力强度因子和离面约束因子的分布基本一致，角度的影响不明显。应力强度因子是厚度的函数，板中面的应力强度因子随厚度的增加逐渐减小趋近干平面值，最大为1．08倍的平面值。当板厚超过15倍的缺口深度时，应力强度因子最大值将从中面转移至接近自由表面位置，距中面约0．4倍板厚。三维约束非常明显的区域在裂尖前沿约0.45倍厚度的范围内．二维到三维的过渡区在裂尖前沿1.5倍厚度的区域内；在中面上三维效应影响区最大，随着离中面距离的增加逐渐减小，在自由表面上降为0。     

软夹硬力学不均匀焊接接头疲劳裂纹闭合行为的实验研究

力学性能不均匀是焊接接头的三大待征之一，本文采用柔度法研究了不同硬夹层宽度的软夹硬力学不均匀焊接接头疲劳裂纹的闭俣行为。研究结果表明，裂纹尖端附近软区的局部屈服在疲劳载荷卸载过程中促使裂纹闭合。随着硬夹层宽度的减小，这一影响越来越明显。