A temperature and pH double sensitive cholesteric polymer film from a photopolymerizable chiral hydrogen-bonded assembly

In this study, a novel H-bonded cholesteric polymer film responding to temperature and pH by changing the reflection color was fabricated. The H-bonded cholesteric polymer film was achieved by UV-photopolymerizing a cholesteric liquid crystal (Ch-LC) monomers mixture containing a photopolymerizable chiral H-bonded assembly (PCHA). The cholesteric polymer film based on PCHA can be thermally switched to reflect red color from the initial green/yellow color as temperature is increased, which is due to a change in helical pitch induced by the weakening of H-bonded interaction in the polymer film. Additionally, the selective reflection band (SRB) of the cholesteric polymer film in solution with pH > 7 showed an obvious red shift with increasing pH values. While the SRB of the cholesteric polymer film in solutions with pH = 7 and pH < 7 hardly changed. This pH sensitivity in solutions with pH > 7 could be explained by the breakage of H-bonds in the cholesteric polymer film and the structure changes induced by―OH and―K + ions in the alkaline solution. In contrast, it couldn’t happen in the neutral and acidic solutions. The cholesteric polymer film in this study can be used as optical/photonic papers, optical sensors and LCs displays, etc.     

自掺杂TiO2纳米管：液相制备及光催化性能

采用水合肼（N₂H₄·H₂O）作为还原剂,在液相环境中制备了自掺杂TiO₂纳米管阵列（NTs）。利用FE-SEM、EDS、XPS、XRD、Raman、UV-Vis/NIR分光光度法以及半导体特性分析系统（Keithley 4200 SCS）分别对样品的形貌,晶体结构,光学特性以及电学性能进行了表征。结果表明：通过这种方法制备的自掺杂TiO₂NTs在带隙中引入了大量的氧空位,创造了氧空位能级,从而提高了样品的电导率,有效提高光生电子-空穴对的产生、分离和传输。此外,由于氧空位的作用,使得TiO₂NTs的带隙变窄,增强了可见光吸收能力,致使样品具有较高的光催化活性,并通过降解甲基橙溶液对样品的光催化活性进行评估。结果显示当光照150min后,自掺杂TiO₂NTs对甲基橙溶液的降解率达73%,并且这种催化剂便于回收和重复使用。     

The Fourier space restricted Hartree-Fock method for the electronic structure calculation of linear poly(tetrafluoroethylene)

Building on the pioneering work of Jean-Marie André and working in the laboratory he founded, the authors have developed a code called FT-1D to make Hartree-Fock electronic structure computations for stereoregular polymers using Ewald-type convergence acceleration methods. That code also takes full advantage of all line-group symmetries to calculate only the minimal set of two-electron integrals and to optimize the computation of the Fock matrix. The present communication reports a benchmark study of the FT-1D code using polytetrafluoroethylene(PTFE) as a test case. Our results not only confirm the algorithmic correctness of the code through agreement with other studies where they are applicable, but also show that the use of convergence acceleration enables accurate results to be obtained in situations where other widely-used codes(e.g., PLH and Crystal) fail. It is also found that full attention to the line-group symmetry of the PTFE polymer leads to an increase of between one and two orders of magnitude in the speed of computation. The new code can therefore be viewed as extending the range of electronic-structure computations for stereoregular polymers beyond the present scope of the successful and valuable code Crystal.     

基于BiOCl-Fe2O3@TiO2介孔复合材料的光电化学合成氨性能研究

传统合成氨工艺存在能耗高、污染严重的问题. 因此, 高效、低能耗绿色合成氨工艺的开发迫在眉睫. 光电化学以H₂O和N₂为原料, 可以在太阳光驱动下, 在常温常压条件下实现氨的合成, 因而受到广泛重视. 但总的来说, 效率和产率都达不到实际要求. 新型高效催化剂及工艺的开发是提高合成氨产率及效率的关键. 非贵金属催化剂具备成本低、来源广泛、可操作性强的优势, 有利于光电化学合成氨的产业化. 本实验采用溶胶凝胶结合原位热裂解的方法制备了分散性好、结构均匀的BiOCl-Fe₂O₃@TiO₂复合材料, 对其物相、微观结构、表面状态、光学性能、电学性能等方面进行了系统表征, 并探究了该材料在常温常压下光电化学合成氨的催化活性. 结果表明, 同纯介孔TiO₂相比_, BiOCl-Fe₂O₃@TiO₂的吸收带隙变窄, 可见光吸收能力增强, 光生载流子的利用率增加, 光电合成氨的产率提升了7倍, 且BiOCl-Fe₂O₃@TiO₂显示了优异的化学稳定性. 本研究工作为绿色合成氨催化材料及工艺设计提供了新思路.     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.     

拓展光催化材料光谱响应的研究进展

光催化技术在解决能源短缺和环境污染问题方面有重要的应用前景,引起了人们的广泛关注。宽光谱响应和高量子效率是实现光催化材料大规模应用的前提。本文介绍了近年来紫外、可见和近红外光催化方面的最新进展,阐述了拓展光响应范围和促进载流子分离的有效途径,总结了光催化材料发展所面临的问题,并对其发展趋势进行了展望。     

Influence of MgO on structure and optical properties of alumino-lithium-phosphate glasses

MgO doped lithium alumino phosphate glasses (PLA: P₂O₅+Li₂O+Al₂O₃+MgO) were prepared by melt quenching technique. Raman spectra display three significant peaks at 698, 1164 and 1383 cm⁻¹ attributed to: symmetric stretching vibrations of the bridging oxygen (BO) in the P–O–P chains, symmetric stretching vibrations of the PO₂ groups, and the asymmetric vibrations vas(PO₂) of the non-bridging oxygen (NBO) atoms, respectively. Also, the density, molar volumes and ion concentration have been discussed and correlated with the structural changes within the glassy matrix. Some optical constants such as refractive index and dispersion parameters (E_o: single-oscillator energy and E_d: dispersive energy) of the glasses were determined. Finally, the values of the optical band gap for direct and indirect allowed transitions have been determined from the absorption edge studies. It is deduced that the values of E_opt increase with increasing MgO content. It was assigned to structural changes induced from the formation of non-bridging oxygen. The Urbach energy (ΔE) was found to decrease from 0.578 to 0.339 eV with increasing MgO content from 0.5 to 2 mol.     

Interface formation of Al2O3 on n‐GaN(0001): Photoelectron spectroscopy studies

Al₂O₃ insulator layers were deposited step by step by the physical vapor deposition (PVD) method onto gallium nitride in the wurtzite form, n‐type and (0001)‐oriented. The substrate surface and the early stages of Al₂O₃/n‐GaN(0001) interface formation were characterized in situ under ultra‐high vacuum conditions by X‐ray and ultraviolet photoelectron spectroscopy (XPS, UPS). The electron affinity (EA) of the substrate cleaned by annealing was 3.6 eV. Binding energies of the Al 2p (76.0 eV) and the O 1s (532.9 eV) confirmed the creation of the Al₂O₃ compound in the deposited film for which the EA was 1.6 eV. The Al₂O₃ film was found to be amorphous with a bandgap of 6.9 eV determined from the O 1s loss feature. As a result, the calculated Al₂O₃/n‐GaN(0001) valence band offset (VBO) is ?1.3 eV and the corresponding conduction band offset (CBO) 2.2 eV.     

高压下锐钛矿TiO2的电阻率及能带结构的研究

应用在位电阻率测量方法研究高压下锐钛矿TiO2的电学性质. 通过研究电阻率随压力变化的异常变化点, 观察到了TiO2从锐钛矿-柯铁矿-斜锆石的相变. 卸压后,电阻率和初始值相差2个数量级, 说明该相变为不可逆相变. 结合第一性原理计算结果表明, 柯铁矿结构更小的带隙是导致TiO2电阻率减小的根本原因.