An efficient low‐dissipative WENO filter scheme

This paper presents a simple and efficient procedure developed for tracing discontinuities in flow fields. Numerical experiments are carried out to test the new sensor coupled with the associated nonlinear WENO dissipation filter developed to suppress the numerical dissipation. The tests show that, for a problem containing shocks and vortices, the implementation of the new sensor and an optimized WENO scheme can obtain a stable and highly resolved solution. The numerical experiments demonstrated that the new filter scheme performs efficiently both in parallel and serial running for one‐dimensional inviscid flow problems. Direct numerical simulation of a Mach 5 turbulent boundary layer over a flat plate was carried out to demonstrate the applicability of the scheme to the DNS practices. Copyright © 2011 John Wiley & Sons, Ltd.     

The contact Yamabe flow on K-contact manifolds

We use the contact Yamabe flow to find solutions of the contact Yamabe problem on K-contact manifolds.     

Grafting onto Wool. XXVII. Graft Copolymerization of MixeD Vinyl Monomers by Use of Ceric Ammonium Nitrate as Redox Initiator

In order to ascertain the effect of a donor monomer, vinyl acetate (VAc), on the graft copolymerization of acceptor monomers, ethyl acrylate (EA) and butyl acrylate (BA), grafting of mixed vinyl monomers (EA + VAc) and (BA + VAc) was carried out on Himachali wool in aqueous medium using ceric ammonium nitrate (CAN) as a redox initiator. Graft copolymerization was carried out at different temperatures for various reaction periods. Percent grafting and percent efficiency were determined as functions of 1) concentration of mixed vinyl monomers, 2) concentration of CAN, 3) concentration of HNO₃ 4) temperature, and 5) reaction time. VAc, the donor monomer, was found to decrease percent grafting of EA and BA onto wool.     

Surface characterization and radical decay studies of oxygen plasma‐treated PMMA films

Polymethylmethacrylate (PMMA) films were modified by RF oxygen plasma with various powers applied for different periods, and the effects of these parameters on the surface properties such as hydrophilicity, surface free energy (SFE), chemistry, and topography were investigated by water contact angle, goniometer, X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy, and the types of the created free radicals and their decay were detected by electron spin resonance spectroscopy (ESR). SFE and contact angle results varied depending on the plasma parameters. Oxygen plasma treatment (100 W–30 min) enhanced the hydrophilicity of PMMA surface as shown by decreasing the water contact angle from 70° to 26°. XPS analysis showed the change in the amounts of the present functionalities as well as formation of new groups as free carbonyl and carbonate groups. The roughness of the surface increased considerably from ~2 nm to ~75 nm after 100 W–30 min oxygen plasma treatment. ESR analysis indicated the introduction of peroxy radicals by oxygen plasma treatment, and the intensity of the radicals increased with increasing the applied power. Significant decrease in radical concentration was observed especially for the samples treated with higher powers when the samples were kept under the atmospheric conditions. As a conclusion, RF plasma, causes changes in the chemical and physical properties of the materials depending on the applied parameters, and can be used for the creation of specific groups or radicals to link or immobilize active molecules onto the surface of a material. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Contact Angle Determined by Spontaneous Imbibition in Porous Media: Experiment and Theory

In this paper, a theoretical model was established to determine the contact angle by introducing a new defined effective capillary radius into the Lucas–Washburn equation. Based on the theoretical model, capillary rise experiments of water imbibed by different glass beads were carried out to measure the contact angle; the results were similar to the available data published in the literature. In addition, the model was modified to take account of the dynamic contact angle, according to the experimental data. The influence of the dynamic contact angle on the movement of the spontaneous imbibition was studied.     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.     

Simultaneous effect of carbon and water on NOx adsorption on a stabilized Pt–Ba/Al2O3 catalyst

The influence of the presence of H₂O on the contact between carbon, used as model soot, and a model four-way catalyst (1% Pt–10% BaO/Al₂O₃) was investigated. NO_x adsorption/TPD cycles at 300 °C together with XRD, XPS and DRIFTS characterizations showed that only surface nitrate species are destabilized by the carbon present in the catalytic bed, leading to a decrease of the NO_x storage capacity and carbonate species formation. In another way, injection of water in the reactive gas flow decreases also the NO_x storage capacity of the catalyst, but promotes the formation of stable nitrate species. A non-cumulative effect of carbon and water was observed. It was proposed that a competition between the destabilization, by carbon, of weakly bonded surface nitrate species and the enhancement of bulk nitrate species formation in the presence of water occurs.     

Photophysics of Fluorescent Contact Sensors Based on the Dicyanodihydrofuran Motif

Fluorescent molecular rotors have been used for measurements of local mobility on molecular length scales, for example to determine viscosity, and for the visualization of contact between two surfaces. In the present work, we deepen our insight into the excited-state deactivation kinetics and mechanics of dicyanodihydrofuran-based molecular rotors. We extend the scope of the use of this class of rotors for contact sensing with a red-shifted member of the family. This allows for contact detection with a range of excitation wavelengths up to ∼600 nm. Steady-state fluorescence shows that the fluorescence quantum yield of these rotors depends not only on the rigidity of their environment, but – under certain conditions – also on its polarity. While excited state decay via rotation about the exocyclic double bond is rapid in nonpolar solvents and twisting of a single bond allows for fast decay in polar solvents, the barriers for both processes are significant in solvents of intermediate polarity. This effect may also occur in other molecular rotors, and it should be considered when applying such molecules as local mobility probes.     

双分散颗粒体系在临界堵塞态的结构特征

堵塞行为是颗粒体系中一种常见的现象,其力学性质与堆积结构的关联非常复杂.本文采用离散元法研究了由两种不同半径颗粒组成的二维双分散无摩擦球形颗粒体系在临界堵塞态所呈现的结构特征,讨论了大小颗粒粒径比与大颗粒百分比对临界堵塞态的影响.数值模拟结果表明,当粒径比小于1.4时,临界平均接触数与大颗粒百分比关系不大,当粒径比大于1.4时随着大颗粒百分比的增大临界平均接触数先减小再增大.而临界体积分数在粒径比小于1.8时随着大颗粒百分比的增加先减小后增大,大于1.8时又基本不随大颗粒百分比而变化.大颗粒百分比在接近0或1时,系统近似为单分散体系,临界平均接触数与体积分数基本不随半径比的增大而变化;在接近0.5时,临界平均接触数随着半径比的增大逐渐减小,而临界体积分数则是先减小后增大.文中对大-小颗粒这一接触类型的百分比也进行了探讨,其值随着大颗粒百分比的增大呈二次函数的变化趋势,粒径比对这一变化趋势只有较小的影响.