一维无序体系电子跳跃导电研究

建立了电子隧穿电导模型,推导了一维无序体系新的直流电导公式.通过计算20000格点无序体系的直流电导率,分析了直流电导率和温度及外场电压的关系,讨论了无序度对直流电导的影响.计算结果表明,无序体系的直流电导率随无序度的增加而减小;外加电场较小时,电导率相对较大,且出现一系列峰值,电压较大时,电导率反而较小;无序体系在低温区出现了负微分电阻特性,电导率随温度的升高而增大,在高温区电导率随温度的升高而减小.计算结果和实验符合很好 关键词： 无序体系 电子隧穿 直流电导率     

我国医疗费用增长与医疗设备投入的相关性研究

近年来我国卫生总费用占GDP的比例增长很快,而在卫生费用结构上则发生政府投入下降和个人支出的上升。本文采集了大量的统计数据,采用统计相关性研究的方法,论证了医疗设备规模的不断扩大是导致医疗费用上升的主要因素之一;医疗设备的快速增长与医院维修费用投入的增长直接相关,而引起医疗设备维修大量投入的主要原因则是故障期内医疗设备的非正常闲置。本文通过对个人卫生费用的上升、医疗设备规模的扩大及其医疗设备维修投入费用增加相关性的分析,说明了在这种关系下,十分有必要研究医院医疗设备维修体系,以在卫生投入和患者权益上达到平衡。     

基于Web的图书馆管理系统访问控制策略

针对基于Web的图书馆管理系统资源访问控制的动态性问题，提出了一种基于角色的访问控制策略描述方案．通过对基于Web的图书馆管理系统访问控制管理影响因素和访问控制需求的分析，结合NIST基于角色的访问控制统一模型标准，构造了一种基于角色的访问控制元模型．并在这一元模型的基础上，提出了一种紧凑的基于角色的访问控制XML策略描述语言框架．结果表明该访问控制策略描述语言框架适合表述动态环境下对图书馆资源的访问策略，提高了基于Web的图书馆管理系统资源访问的安全性．     

19F+27Al耗散反应中双核系统的转动与形变

测量了¹⁹F+²⁷Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV到118.75MeV, 能量步长为250keV. 从产物的 能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量, 与相粘模型计算的刚体转动惯量相比较, 结果表明形成的双核系统有大的形变.     

Necessary conditions for multistationarity in discrete dynamical systems

R. Thomas conjectured, 20 years ago, that the presence of a positive circuit in the interaction graph of a dynamical system is a necessary condition for the presence of several stable states. Recently, E. Remy et al. stated and proved the conjecture for Boolean dynamical systems. Using a similar approach, we generalize the result to discrete dynamical systems, and by focusing on the asynchronous dynamics that R. Thomas used in the course of his analysis of genetic networks, we obtain a more general variant of R. Thomas’ conjecture. In this way, we get a necessary condition for genetic networks to lead to differentiation.     

Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.     

确定线性偏微分方程组可积系统的对合特征集方法

基于Ritt-Wu特征集方法和Riquier-Janet理论,给出一种将线性微分方程组化成简单标准形式的有效算法．该算法通过消去冗余和添加可积条件获得线性微分方程组的完全可积系统(有形式幂级数解)或不相容判定．该算法不仅适用于常系数的线性偏微分方程组,而且对于变系数(以函数为系数)仍然有效．作者还给出了完全可积系统判定定理及其严格证明．     

Lower bound for the convergence rate of nonstationary Jacobi-like iteration

Stationary and nonstationary Jacobi-like iterative processes for solving systems of linear algebraic equations are examined. For a system whose coefficient matrix A is an H-matrix, it is shown that the convergence rate of any Jacobi-like process is at least as high as that of the point Jacobi method as applied to a system with 〈A〉 as the coefficient matrix, where 〈A〉 is a comparison matrix of A.     

Estimating Sampling Errors in REA Survey: A Model Approach for the Synthetic Presentation of Results for Main Variables Involved in Economic Analysis

A new sample business survey for agriculture, the REA survey, and a project of integration with the FADN network (RICA in Italy) have significantly changed the production of statistical information nowadays available with reference to the agricultural sector. On the basis of this relevant information, new economic analyses are being developed on farms’ performance, agricultural households’ income and the Common Agricultural Policy (CAP). In this paper the authors estimate the relationship between the levels of variables of interest and their sampling errors using models in order to improve the accessibility of the information on estimates accuracy to the final users (agricultural analysts, policy makers). The paper is the result of a joint research of the three authors. Sections 1–3 and 6 by Pizzoli, Sects. 4 and 5 by Rondinelli, Sect. 7 by Filiberti, conclusions joint to the three authors.