Bestimmung von Melment in Zementmischungen durch UV-Spektralphotometrie

Ohne Zusammenfassung

---

Determination of melment in cement mixtures by UV-spectrophotometry

     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Gas-chromatographische Bestimmung von Glykokollbetain in Mischfuttermitteln

Zusammenfassung Es wird eine Methode zur gas-chromatographischen Bestimmung von Glykokollbetain in Mischfuttermitteln beschrieben. Die Extraktion erfolgt mit Alkohol, anschließend wird die Lösung über einen Kationenaustauscher gereinigt. Das Betain wird mit N-O-Bis-(trimethylsilyl)-trifluoracetamid und Acetonitril verestert und gas-chromatographisch bestimmt. Für die beschriebene Methode errechnete sich bei einem Mittelwert von 2309 ppm und 7 Parallelen ein Variationskoeffizient von 1,79%.

---

Gas-chromatographic determination of glycocoll betaine in feeding-stuffs

The betaine is extracted with ethanol, purified by cation-exchange chromatography, esterified with N-O-bis-trimethylsilyl-trifluoracetamide and determined by gas chromatography. The coefficient of variation for the described method for 7 parallels and an average of 2309 ppm was 1.79%.

     

In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

Biamperometric neutralisation titrations in non-aqueous solvents applying tin electrode pair for the end-point detection

Summary Tertiary amines and salts of organic acids in acetic anhydride with 5% of acetic acid were titrated applying a biamperometric indicating system consisting of a polarised or unpolarised pair of tin electrodes by means of 0.1 N perchloric acid in glacial acetic acid. Amounts of 15.4–29.8 mg were analysed with average deviations of <0.6%, the results obtained being in a good agreement with those of potentiometry. The biamperometric end-point detection using an indicating system of polarised pair of tin electrodes can be applied for coulometric determinations of these bases with satisfying accuracy. By means of anodic generation of hydrogen ions in the presence of hydroquinone amounts of 0.5–1.0 mg were titrated with average deviations of < 1.3%. The results obtained were compared with those obtained of catalytic thermometric and photometric titrations.

---

Biamperometrische Neutralisationstitrationen in nichtwärigen Lösungsmitteln unter Anwendung eines Zinn-Elektrodenpaares als Indicatorsystem

Zusammenfassung Tertiäre Amine und Salze organischer Säuren werden in Acetanhydrid mit 5% Essigsäure durch Titration mit einer 0,1 N Lösung von Perchlorsäure in Essigsäure bestimmt. Das verwendete biamperometrische Indicatorsystem besteht aus einem Paar polarisierter oder nichtpolarisierter Zinnelektroden. Mengen von 15,4–29,8 mg wurden mit einer mittleren Abweichung von <0,6% analysiert. Die Ergebnisse stimmen gut mit denen von potentiometrischen Titrationen überein. Die biamperometrische Endpunkttechnik mit polarisierten Zinnelektroden kann für coulometrische Bestimmungen dieser Basen mit zufriedenstellender Genauigkeit benutzt werden. Durch anodische Erzeugung von Wasserstoffionen in Gegenwart von Hydrochinon wurden Mengen von 0,5–1,0 mg mit einer mittleren Abweichung von < 1,3% titriert. Die Ergebnisse wurden mit denen von katalytisch-thermometrischen und photometrischen Titrationen verglichen.

     

Predicting the selectivity of imprinted polymers

Summary Imprinted polymers as stationary phases for HPLC separations have been the subject of extensive investigations in recent years. In order to aid the rational design of synthetic protocols for the preparation of imprinted polymers, a series of calculations were made to assess the equilibrium concentration of templatemonomer complexes as a function of association constant (K) for the functional groups involved in the interactions and initial concentrations of reactants. This data was then used to predict the selectivity of polymers prepared under different reaction conditions and the model was tested using an experimentally determined value ofK and separation factors taken from the literature.     

The synthesis and crystal structure of metal complexes S-alkyl-N-(ferrocenyl-1-methyl-methylidene)-dithiocarbazate and the study on their quenching the luminescence ofruthenium(bipyridine)_~3(2+)

The cobalt, nickel, copper, zinc and cadmium complexes of S-methyl-N-(ferrocenyl-l-methyl-methylidene)-dithiocarbazate (H-LSM) and S-benzyl-N-(ferrocenyl-l-methyl-methylidene)-dithiocarbazate (H-LSB) were synthesized and the crystal structure of Cd[Fe-C(CH3) = NNCSS. (CH3)]2 was solved by X-ray diffraction. The crystal is in the orthorhombic system with space group Pbca, cell parameters a=19.741(3), b=19.924(5), c=15.452(4) A, and the final factors of R=0.032. The study on quenching the luminescence of Ru(bpy)3 by those complexes showed that bimolecular quenching constants obtained from the Stern-Vohner constant and the excited-state lifetime were related to the redox potential of the quencher. Linear relationship is shown in the plot of logkq vs. E1/2(Q+/Q). The main factor which influences the quenching rate constant and the redox potential is the coordinating ability of the metal in the complex.     

Photometric titration of arsenate with thorium nitrate on the microgram and milligram scale

Summary A method is described for the photometric titration of arsenate with thorium nitrate using pyrocatechol violet as indicator. The method works at a low pH level and is therefore not subject to the most cationic interferences. Alkali salts do not affect the determination even at high concentrations if present as halides, nitrates or perchlorates. This makes the method particularly suitable for the analysis of arsenic in organic and inorganic compounds after decomposition.

---

Zur photometrischen Titration von Arsenat mit Thoriumnitrat im Mikrogramm- und Milligrammbereich

Zusammenfassung Ein Verfahren zur photometrischen Titration von Arsenat mit Thoriumnitrat gegen Brenzcatechinviolett als Indicator wird beschrieben. Die Titration erfolgt bei niedrigem pH-Wert und wird deshalb von den meisten Kationen nicht beeinflußt. Außerdem stören auch hohe Konzentrationen an Alkalisalzen nicht, wenn diese als Halogenide, Nitrate oder Perchlorate vorliegen. Deshalb ist das Verfahren insbesondere zur Analyse von anorganischen und organischen Arsenverbindungen nach Aufschlüssen geeignet.

     

On the loss of cadmium, antimony and silver during dry ashing of biological material

Summary The loss of cadmium, antimony and silver during dry ashing of marine weeds, mussels and shrimps was studied with the aid of radioactive tracers. Except for antimony all biological material was labelled by uptake of the radioactive tracers by the organisms while still alive. At an ashing temperature of 500° C and below no significant loss by volatilization of these elements occurs. The results obtained at higher temperatures with cadmium show that the behaviour of this element may depend on the composition of the organic material. Retention on the wall of quartz crucibles did not cause serious losses.

---

Über den Verlust an Cadmium, Antimon und Silber bei der Trockenveraschung von biologischem Material

Zusammenfassung Mit Hilfe radioaktiver Tracer wurden die Verluste an Cadmium, Antimon und Silber bei der Trockenveraschung von Seetang, Muscheln und Krabben untersucht. Mit Ausnahme von Antimon wurden alle Materialien mit den Tracern durch Aufnahme im lebenden Zustand markiert. Bei Veraschungstemperaturen von 500° C und darunter konnten keine signifikanten Verluste durch Verflüchtigung der Elemente festgestellt werden. Das Verhalten von Cadmium bei höheren Temperaturen kann von der Zusammensetzung des organischen Materials abhängen. Verluste durch Haften an der Wand des Quarztiegels waren unbedeutend.

     

NCO自由基与SO_2、CS_2反应的速率常数

利用波长为266nm的激光光解CHBr3产生CH自由基,其与NO反应作为NCO自由基的来源.在298K,总压2660Pa的条件下,采用激光诱导荧光的方法,研究了NCO自由基与SO2、CS2的反应.得到了NCO自由基与SO2、CS2双分子反应速率常数分别为(1.8±0.3)×10-11和(3.1±0.4)×10-12cm3·molecule-1·s-1.对这两个反应在B3LYP/6-31 G(d)的水平上进行理论研究的结果表明,NCO自由基与SO2、CS2的反应是加成反应,其机理是NCO自由基中的N原子攻击反应物的中心原子,得到加成产物.