Propagation of plane waves at the imperfect boundary of elastic and electro-microstretch generalized thermoelastic solids

The problem of reflection and transmission of plane waves incident on the contact surface of an elastic solid and an electro-microstretch generalized thermoelastic solid is discussed. It is found that there exist five reflected waves, i.e., longitudinal displacement （LD） wave, thermal （T） wave, longitudinal microstretch （LM） wave and two coupled transverse displacement and microrotational （CD（I） and CD（II）） waves in the electro-microstretch generalized thermoelastic solid, and two transmitted waves, i.e., longitudinal （P） and transverse （SV） waves in the elastic solid. The amplitude ratios of different reflected and transmitted waves are obtained for an imperfect boundary and deduced for normal force stiffness, transverse force stiffness, and perfect bonding. The variations of amplitude ratios with incidence angles have been depicted graphically for the LD wave and the CD（I） wave. It is noticed that the amplitude ratios of reflected and transmitted waves are affected by the stiffness, electric field, stretch, and thermal properties of the media. Some particular interest cases have been deduced from the present investigations.     

TM-like and TE-like Modes Coupling in a Two-Dimensional Photonic Crystal Slab Composed of Truncated Cone Silicon Rods

We numerically investigate the coupling of TE-like modes and TM-like modes in a two-dimensional （2D） photonic crystal （PC） slab composed of truncated cone silicon rods. In such structures, the classification of TE-like modes and TM-like modes is generally impossible and the coupling occurs due to vertical structural asymmetries. The frequency and wavevector dependences of the mode coupling are discussed by investigating the photonic band structures, and the coupling efficiency is studied by examining the transmittance. The results show that the efficiency of mode conversion is strengthened by the vertical asymmetry and weakened by the clear sinall gap. These structures could be used as polarization conversion devices in integrated optics.     

横向行波偏转结构中电磁场分布及腔间耦合系数的理论研究

 模拟分析了横向行波偏转结构中传播的HEM₁₁波的特性,并与加速模式TM₀₁进行了比较。设计并加工完成了该偏转结构的实验腔,用谐振微扰法测出了中间腔的横向场分布曲线,并与HFSS模拟结果进行了比较,模拟结果和测试结果一致,其横向场的最大值在偏离轴心径向的中间位置。用HFSS模拟了腔的色散特性,对有稳定孔和没有稳定孔的情况进行了比较,用谐振法对实验腔的色散特性进行了测试,测试结果和模拟结果一致。通过对等梯度偏转结构等效电路的简化,给出了等阻抗结构的等效电路,定性分析了此偏转结构的腔间耦合情况,计算了腔间耦合系数,模拟结果和测试结果一致。     

合肥光源逐束团横向反馈系统

 介绍了在合肥光源研制的一套横向(x, y方向)高频、宽带逐束团测量和反馈系统,以及抑制耦合束团不稳定性的初步实验。其中重点介绍了在该系统研制过程中所涉及的部分关键技术：矢量运算模块的开发使得反馈系统的调试简易方便;Notch滤波器用于滤除反馈信号中的直流分量以及回旋频率分量,节省反馈功率;激励条带的研制。初步的反馈实验结果表明：反馈系统开启后不稳定性振荡得到抑制。     

长春市第五光学仪器有限公司

长春市第五光学仪器有限公司是由长春市第五光学仪器厂转制而成,公司始建于1962年,主要从事光学仪器、教学实验仪器研制与开发,具备对光学仪器的机械加工、装配检测、独立设计及开发新产品的综合能力,具有完善的计量检测仪器,是长春市技术监督计量二级单位。     

Perturbation solution to unsteady flow in a porous channel with expanding or contracting walls in the presence of a transverse magnetic field

An incompressible flow in a porous channel with expanding or contacting walls in the presence of a transverse magnetic field is considered. Using similarity transformations, the governing equations are reduced to the nonlinear ordinary differential equations. The exact similar solutions for the different cases of the expansion ratio and the Hartmann number are obtained with a singular perturbation method, and the associated behavior is discussed in detail.     

Effect of vacancy defect on electrical properties of chiral single-walled carbon nanotube under external electrical field

Ab initio calculations demonstrated that the energy gap modulation of a chiral carbon nanotube with mono-vacancy defect can be achieved by applying a transverse electric field. The bandstructure of this defective carbon nanotube varying due to the external electric field is distinctly different from those of the perfect nanotube and defective zigzag nanotube. This variation in bandstructure strongly depends on not only the chirality of the nanotube and also the applied direction of the transverse electric field. A mechanism is proposed to explain the response of the local energy gap between the valence band maximum state and the local gap state under external electric field. Several potential applications of these phenomena are discussed.     

层内突进传质扩散数学模型及求解

针对窜流型油藏的特点,抽象出物理原型,同时考虑纵向和横向扩散,建立层内突进传质扩散数学模型.应用拉普拉斯变换,求得层内突进传质扩散数学模型的解析解,并得到小段塞情况下的解析解.应用通用有限元分析软件,建立层内突进传质扩散的几何模型,并求得层内突进传质扩散数学模型的数值解.绘制层内突进传质扩散数学模型的浓度分布二维剖面及不同时间步的浓度变化剖面;通过无因次距离和无因次浓度关系及孔隙体积与无因次浓度关系可以看出,贝克莱特(Pe)数越大,峰值浓度越高,见剂时间越晚.通过解析解及数值解结合的方法,可加深对传质扩散本质的理解.     

基于监督学习的紫外-可见光光谱水质在线异常检测方法研究

水资源关系到国计民生,近年来时有发生的水污染事件使污染物入侵预警得到了广泛的社会关注。针对现有基于紫外-可见光光谱的水质异常检测方法存在的检出下限偏低的问题,提出一种基于监督学习的紫外-可见光光谱水质异常检测方法。该方法首先获取不同数据集中的正常样本差异性空间,再使用正交投影方法去除差异性空间中的光谱数据分量,以达到基线校正的目的;然后采用偏最小二乘判别分析从校正后的光谱中提取特征,利用训练集得到的最优阈值确定离群点;最后采用序贯贝叶斯滚动更新每个时刻上的异常概率,确定水质报警序列。实验选用苯酚作为模拟污染入侵事件的注入试剂,采样2周内的紫外-可见光光谱数据,在实验平台上对提出的方法进行了验证。实验结果表明,采用的正交投影基线校正方法可以消除不同批次水质光谱的背景差异,更为充分的利用了光谱信息,降低了对特征污染物的检出下限。     

有监督学习的超声背散射方法在骨质评价中的应用

在超声背散射方法评价骨质的实际应用中,如何更为准确地判断测量对象是否为骨质疏松是一个重要问题。提出一种有监督学习的超声背散射评价方法,根据超声背散射离体实验的信号处理结果,对松质骨样本使用支撑向量机和自适应增强的有监督学习算法进行预测和分类。研究结果表明,有监督学习的超声背散射评价方法分类的准确率为80.00%~82.86%,并且对骨质疏松的样本具有较高的特异性(特异度>92.3%)。因此有监督学习的超声背散射评价方法具有有效性,评价效果优于现有的其它定量超声方法,对超声背散射方法的在体应用有一定帮助。