低压催化氚化亮石松碱的定位效应的研究

近年来,中草药有效成分的研究引起国内外有关学者普遍关注。氚标记中草药有效成分是研究其相应的药代动力学和代谢产物的主要手段,它具有操作简便,条件温和等优点,但是一般氚化方法均不能明确给出氚化位置。而研究氚化定位效应又是药理工作者急待解决的重要课题,所以在很大程度上限制了该项技术的使用范围。最近,郑冬珠等人用FX—100型核磁共振谱仪给出了在PdO催化剂存在条件下,低压氚化亮石松碱的氚化位置及其相对含量。本文在前文基础上,以亮石松碱为底物,根据Fraser和Garnett等人提出的氢—氚同位素交换反应动力学理论,采用CNDO/2法,对PdO催化亮石松碱的立体构型讲行了计算,得出一些有意义的结果。     

冠醚配合物的研究XV.若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应

本文运用微量电导滴定及计算机拟合技术，研究了若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应，测定了配合物的组成及稳定常数，并对实验结果进行了讨论。     

Investigation of Aconitine-type Alkaloids from Processed Tuber of Aconitum carmiechaeli by HPLC-ESI-MS/MS~n

Introduction Aconitine-type alkaloids isolated from the roots of Aconitum carmiechaeli show a potential toxicity and a broad spectrum of bioactivity[1-4].On the basis of the C8-substituent of C19-diterpenoid skeleton,aconitine-type alkaloids can be divided into diester-diterpenoid alkaloids(DDAs),monoester-diterpenoid alkaloids(MDAs),and lipo-alkaloids(Fig.1).     

Ln(Ⅲ)与2-羟基-1-萘醛缩蛋氨酸盐及邻菲咯啉三元配合物的合成与表征

合成了稀土硝酸盐与希夫碱盐2-羟基-1-萘醛缩蛋氨酸钾(以KL表示)及邻菲咯啉(Phen)的四种固体三元配合物。通过元素分析，IR，UV，DTA-TG及摩尔电导分析等手段确定配合物的组成为[Ln(L)(Phen)(NO3)(H2O)]NO3(Ln＝Gd，Dy，Er，Yb)，并对它们的配合方式及某些物理和化学性质进行了研究。     

含金鸡纳碱的光活性聚合物──Ⅰ．金鸡纳碱／丙烯酰胺共聚物的合成与表征

研究了金鸡纳碱与丙烯酰胺的自由基共聚反应。发现在氯仿／乙醇混合溶剂中采用硫酸奎宁作为金鸡纳碱共聚单体可以合成收率和金鸡纳碱含量均较高的新型水溶性共聚物。对共聚物用元素分析、核磁共振、粘度和旋光度测定等方法进行表征，发现在假定丙烯酰胺链节为非光活性的条件下共聚物中金鸡纳碱链节的比旋光度随聚合配方中金鸡纳碱含量的增加而增加。     

A New Method of Synthesis of Azo Schiff Base Ligands with Azo and Azomethine Donors： Synthesis of N-4-Methoxybenzylidene-2-（3-hydroxyphenylazo）-5-hydroxyaniline and Its Nickel（Ⅱ） Complex

A new method for the synthesis of azo Schiff an base ligand in which the azo and azomethine groups are coordination sites was developed through a Schiff base precursor. The precursor, N-4-methoxybenzylidene-3-hydroxyphenylamine （SB） derived from 3-aminophenol was regioselectively coupled with a diazonium ion para to the hydroxyl group of the amine component of the Schiff base. The para selectivity was controlled by the directing effect of the hydroxyl group. The ligand and its nickel（Ⅱ） complex were characterized by elemental analyses, IR and UV-Vis spectroscopy. The analytical and spectral data supported the mononuclear formulation of the complex with metal to ligand ratio （M ： L = 1 ： 2） and suggested a square planar geometry for the complex.     

Cu[C5H3N(CCH3=N-C6H5)2]2(PF6)2配合物的合成、晶体结构和热分解反应动力学

The title complex Cu[C₅H₃N(CCH₃=N-C₆H₅)₂]₂(PF₆)₂ has been synthesized by reaction of Schiff base C₅H₃N(CCH₃=N-C₆H₅)₂ and cupric sulfate in toluene solution. The crystal structure was determined by X-ray diffraction method and the chemical formula weight of the complex is 1041.85. The crystal structure belongs to triclinic system with space group P1 and cell parameters: a=12.6470(10)?, b=14.123(2)?, c=15.613(2)?;α=66.150(10)°,β=79.470(10)°,γ=78.290(10)°, V=2481.6(5)?³, Z=2, D_c=1.394Mg·m^-3 and F(000)=1064. The final R[I >2σ(I)]:R₁=0.0668, wR₂=0.1927; R(all data): R₁=0.1133, wR₂=0.2357. The Cu(Ⅱ) was coordinated by six nitrogen, at the same time the Cu(Ⅱ) formed a distorted octahedron, besides the angles and planes of this compound were discussed . The result of kinetics of the thermal decomposition indicated that the first step of it is 2 series chemical reactions, the function of machanism is f(a)=(1-a)², and the activation energy is 144.64E/kJ. CCDC: 180872.     

MMM分子筛的制备与表征

 以碱溶液处理ZSM－5分子筛，得到了含微孔及介孔的MFI结构分子筛（简称MMM），并采用XRD，XRF，SEM，XPS和低温氮吸附等技术对分子筛进行了表征．结果表明，通过改变处理碱的浓度可以得到具有不同物化性能的MMM分子筛，其化学组成、介孔及微孔的大小和多少，及分子筛晶体上n（Al）／n（Si）均随碱浓度的变化而变化，随着碱浓度的增加，分子筛部分微孔结构遭到破坏，介孔的数量增加，孔径增大，n（Al）／n（Si）增大．碱处理脱硅的过程包括脱除晶粒间的无定形物质，脱除分子筛表面的硅及脱除分子筛体相硅等步骤，硅脱除以后形成了介孔．