聚3-己基噻吩：非富勒烯太阳能电池中的量子效率损失和电压损失

聚3-己基噻吩(P3HT)以其合成工艺简单、成本低廉的优势,成为有机光伏领域中最具吸引力的电子给体材料之一。然而,目前P3HT: 非富勒烯太阳能电池的光伏性能仍然较差。在本工作中,我们证明了与P3HT: 富勒烯太阳能电池相比,较快的电荷转移态的非辐射衰减速率(K_nr)是导致P3HT: 非富勒烯太阳能电池中较低的量子效率和较高的电压损失的原因。然后,我们研究了基于非富勒烯受体ZY-4Cl的太阳能电池的工作机理。研究结果表明与P3HT: 非富勒烯体系相比,P3HT: ZY-4Cl中K_nr的降低改善了器件的量子效率,同时降低了电压损失。K_nr降低的原因可以部分归因于电荷转移态能量的增加。此外,给体分子和受体分子之间的距离(DA间距)的增大也是K_nr减少的重要原因。因此,我们得出结论：为了提高P3HT太阳能电池的性能,需进一步降低器件的K_nr,这可通过增加活性层中的DA间距来实现。     

Ultrasound Microbubbles Enhance the Efficacy of Insulin-Like Growth Factor-1 Therapy for the Treatment of Noise-Induced Hearing Loss

The application of insulin-like growth factor 1 (IGF-1) to the round window membrane (RWM) is an emerging treatment for inner ear diseases. RWM permeability is the key factor for efficient IGF-1 delivery. Ultrasound microbubbles (USMBs) can increase drug permeation through the RWM. In the present study, the enhancing effect of USMBs on the efficacy of IGF-1 application and the treatment effect of USMB-mediated IGF-1 delivery for noise-induced hearing loss (NIHL) were investigated. Forty-seven guinea pigs were assigned to three groups: the USM group, which received local application of recombinant human IGF-1 (rhIGF-1, 10 µg/µL) following application of USMBs to the RWM; the RWS group, which received IGF-1 application alone; and the saline-treated group. The perilymphatic concentration of rhIGF-1 in the USM group was 1.95- and 1.67- fold of that in the RWS group, 2 and 24 h after treatment, respectively. After 5 h of 118 dB SPL noise exposure, the USM group had the lowest threshold shift in auditory brainstem response, least loss of cochlear outer hair cells, and least reduction in the number of synaptic ribbons on postexposure day 28 among the three groups. The combination of USMB and IGF-1 led to a better therapeutic response to NIHL. Two hours after treatment, the USM group had significantly higher levels of Akt1 and Mapk3 gene expression than the other two groups. The most intense immunostaining for phosphor-AKT and phospho-ERK1/2 was detected in the cochlea in the USM group. These results suggested that USMB can be applied to enhance the efficacy of IGF-1 therapy in the treatment of inner ear diseases.     

Influences of Sr2+ Doping on Microstructure,Giant Dielectric Behavior,and Non-Ohmic Properties of CaCu3Ti4O12/CaTiO3 Ceramic Composites

The microstructure, dielectric response, and nonlinear current-voltage properties of Sr²⁺-doped CaCu₃Ti₄O₁₂/CaTiO₃ (CCTO/CTO) ceramic composites, which were prepared by a solid-state reaction method using a single step from the starting nominal composition of CCTO/CTO/xSrO, were investigated. The CCTO and CTO phases were detected in the X-ray diffraction patterns. The lattice parameter increased with increasing Sr²⁺ doping concentration. The phase compositions of CCTO and CTO were confirmed by energy-dispersive X-ray spectroscopy with elemental mapping in the sintered ceramics. It can be confirmed that most of the Sr²⁺ ions substituted into the CTO phase, while some minor portion substituted into the CCTO phase. Furthermore, small segregation of Cu-rich was observed along the grain boundaries. The dielectric permittivity of the CCTO/CTO composite slightly decreased by doping with Sr²⁺, while the loss tangent was greatly reduced. Furthermore, the dielectric properties in a high-temperature range of the Sr²⁺-doped CCTO/CTO ceramic composites can be improved. Interestingly, the nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were significantly enhanced. The improved dielectric and nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were explained by the enhancement of the electrical properties of the internal interfaces.     

Enhanced Physical and Mechanical Properties of Nitrile-Butadiene Rubber Composites with N-Cetylpyridinium Bromide-Carbon Black

The physical and mechanical properties of nitrile–butadiene rubber (NBR) composites with N-cetylpyridinium bromide-carbon black (CPB-CB) were investigated. Addition of 5 parts per hundred rubber (phr) of CPB-CB into NBR improved the tensile strength by 124%, vulcanization rate by 41%, shore hardness by 15%, and decreased the volumetric wear by 7% compared to those of the base rubber-CB composite.     

Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

Thermally stimulated depolarization currents, TSDC, wide-angle X-ray scattering, WAXS, differential scanning calorimetry, DSC, and polarized light optical microscopy, PLOM, have been used to examine poly(L-lactide)-b -poly( -caprolactone) diblock copolymers in a wide composition range. Both components are crystallizable and the miscibility in the amorphous phase has been determined from the behavior of the primary relaxations which are the dielectric manifestation of the glass transition, and also from the superstructural morphology revealed by PLOM and the compositional dependence of the melting points as determined by DSC. Distinct segmental mobilities in the amorphous phase which can be well resolved by TSDC are present; the mode of the slower component shifts to lower temperatures as the PCL content increases while the glass transition of neat PCL is present for all compositions. A relaxation times bimodal distribution is apparent for PCL-rich copolymers. The composition dependence of the multiple glass transitions detected in these weakly segregated copolymers are predicted by the self-concentration model for a miscible blend made of components with a large T_g contrast.     

Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating

The higher wear resistance of Ni based nano composite coatings makes them potential replacement in protecting the substrate materials. The role of surface roughness of the coating along with wear parameters on the specific wear rate, pin temperature, and COF are addressed in the present study. The use of hard nano Al₂O₃ particles found significant role in increasing the resistance to wear for Ni matrix coatings on Al6061 material. The resistance to dislocation offered by these nano Al₂O₃ particles and smear out of debris with plastic deformation indicated abrasive and adhesive nature of wear mechanism in combination. The optimization of wear parameters are carried out by surface response method based grey relation analysis. The normal load applied onto the pin has significant influence on the specific wear rate and temperature rise in the pin. The surface roughness of the coating has also found instrumental in the higher pin temperature and friction coefficient.     

Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

手性负折射率材料的最新进展

阐述了手性负折射率现象的产生机制;总结了近几年国内外手性负折射率材料在仿真模拟和实验制备方面的研究进展;分析了手性负折射率材料的旋光性、手性参数、损耗等;介绍了手性负折射率材料在各个领域的应用。分析认为,探索手性负折射率材料的新机制、新方法和新材料,从而在可见光波段实现负折射率是未来手性负折射率材料的重要发展方向之一。     

操控非线性损耗实现稳定的高功率单频激光及可调谐激光的输出

通过操控线性和非线性损耗,使激光器满足单频运转的物理条件,获得了稳定高功率单频激光输出.利用非线性损耗取代了现有的标准具锁定技术,实现无调制锁定的宽带连续可调谐激光输出.     

Swift heavy ion induced capacitance and dielectric properties of Ni/n-GaAs Schottky diode

The in-situ capacitance and dielectric properties of 25 MeV C⁴⁺ ion irradiated Ni/n-GaAs Schottky barrier diode (SBD) were studied at 100 kHz in the fluence range 5 × 10¹⁰ – 5 × 10¹³ ions/cm². The investigation shows reduction in capacitance and charge density with increase in ion fluence. Consequent changes were observed in other related parameters like conductance, dielectric constant, dielectric loss, loss tangent and electrical modulus. The results were interpreted in terms of generation of swift heavy ion induced acceptor trap states by electronic energy loss mechanism. Besides, the switch over characteristics of depletion to inversion regions in the CV plot reveals minority carrier recombination centers also. The dispersion and relaxation peaks observed in bias dependent dielectric plots were ascribed to the polarization and relaxation mechanism due to the interfacial trap states. The traps and recombination centers were found to alter the barrier characteristics of the fabricated SBD depending upon the ion fluence.