离子色谱法测定水样中氯离子的测量不确定度评定

分析了离子色谱法测定水样中氯离子不确定度的来源,包括标准系列配制引入的不确定度、标准系列浓度-峰面积拟合直线引入的不确定度、样品稀释引入的不确定度,计算了不确定度分量及合成不确定度,扩展不确定度为5.6%。     

石墨炉原子吸收法测定土壤中镉的测量不确定度评定

石墨炉原子吸收法测定土壤中镉的不确定度主要来源于称量样品、定容样品消解液、测定样品消解液中镉的质量浓度及测定土壤水分引入的不确定度。对各不确定度分量进行了计算,求得合成标准不确定度和扩展不确定度分别为0.0026、0.005mg/kg。镉测量不确定度的主要来源是测定样品消解液中镉质量浓度引入的不确定度。     

大气颗粒物中总碳含量的测量不确定度评定

分析了元素分析仪测定大气颗粒物中碳质组分的测量不确定度来源,对总碳含量的测量不确定度进行了评估。测定咖啡碱标准样品中的碳含量,称样量为1 500~2 500μg时,测定结果为(49.27±0.26)%;测定大气颗粒物样品中的总碳含量,样品面积为3.14 cm2时,测定结果为(106±3)μg/cm2。     

对在建标技术报告中正确贯彻《测量不确定度表示指南》的理解

针对计量人员在贯彻《测量不确定表示指南》,尤其是在撰写“建标技术报告”时遇到的一些体问题,进行了探讨。     

Some aspects of quality assessment of the k0-based method of NAA

Neutron activation analysis is one of the analytical techniques often used for certification of reference materials. The k₀-based method of instrumental neutron activation analysis can also be applied in intercomparison runs in the certification process and therefore it is desirable to know its accuracy in advance. Possible systematic errors related to the application of nuclear data at given neutron flux rate parameters, that can affect the uncertainties of the results obtained by this specific method, are elucidated and error propagation factors calculated for a typical irradiation position in the TRIGA Mark II reactor of the Jozef Stefan Institute. It was found that these uncertainties are at the level of 1–2% on the average.     

石墨炉原子吸收光谱法测定土壤中铅量的测量不确定度评定

通过石墨炉原子吸收光谱法对土壤中的铅量进行了测定,对影响测量结果的不确定度分量进行了量化的计算.从而得出影响铅量测量不确定度的主要因素是测量样品消解液中的铅的质量浓度引起的不确定度.     

Measurement uncertainty and the use of reference materials

The use of (certified) reference materials and quality control materials can form a suitable basis for evaluating measurement uncertainty of routine measurements. In particular when these materials are used for quality control purposes, it is not always evident how the quality control data can be used in the uncertainty budget of a routine measurement. Current guidance documents on the evaluation of measurement uncertainty and the use of reference materials treat this subject only in part, or in very generic terms. ISO/REMCO has established a new working group that will provide practical guidance and examples on how to use quality control data in the evaluation of measurement uncertainty. A short introduction to the subject is given.

A Novel Method for Quantification of Circulating DNA in Serum by Capillary Zone Electrophoresis

In this paper, we first presented a novel method for quantification of circulating DNA in human serum based on capillary zone electrophoresis with laser-induced fluorescence detection (CZE-LIF). The serum was digested by proteinase to release free DNA, and then CZE-LIF system was used for the quantification of total circulating DNA. This method was successfully used to quantify the circulating DNA levels in sera from healthy individuals and certain cancer patients.We found the significantly elevated circulating DNA levels in certain prostate cancer patients. Our results demonstrated that CZE-LIF system has good linearity, excellent sensitivity (0.5 ng/mL DNA),satisfactory reproducibility (RSDs in one day and between days were both less than 5%) and reliability, and is well suitable to the quantification of the circulating DNA in human serum or plasma.     

A Validated Chiral LC Method for the Determination of Enantiomeric Purity of Pemetrexed Disodium on an Amylose-Based Chiral Stationary Phase

A simple and new isocratic normal phase chiral HPLC method has been developed for the determination of enantiomeric purity of pemetrexed disodium (l-enantiomer) in bulk drugs with a short run time of about 20 min. Chromatographic separation of l and d-enantiomers of pemetrexed disodium was achieved on an amylose based chiral stationary phase using a mobile phase consists of hexane, ethanol and trifluoro acetic acid. The resolution between the enantiomers was found to be more than 2.0. The system precision and method precision were found to be within 5% RSD for the distomer (d-enantiomer) at its specification level (i.e. not more than 1.0% w/w). The limit of detection and limit of quantification of distomer were 1.6 and 5 μg mL⁻¹, respectively for 10 μL injection volume. The percentage recovery of distomer was ranged from 90.6 to 105.7 in bulk drug samples. The test solution was found to be stable in the diluent for 48 h. The method was found to be specific for the enantiomers of pemetrexed disodium and can be conveniently used for the quantification of undesired d-enantiomer present in the bulk drug samples of pemetrexed disodium.     

Sampling and metrology

The result of a measurement refers in principle only to the amount of substance actually contributing to the analytical signal. However, an appropriate definition of the measurand must include a specification of the system for which the result of the measurement should apply. All systems being inherently heterogeneous, representativity assumes importance for the metrological quality of a measurement, and the process needed to ascertain representativity is sampling. The contribution from this characteristic must be included when expressing the uncertainty of the reported value of the measurand. Representative sampling of systems that are infinite or non-uniform was developed by Pierre Gy in his Theory of Sampling. Finite systems can achieve uniformity by mechanical treatment and mixing; the heterogeneity of these systems can be characterized by a sampling constant, expressed in units of weight, for each particular species being determined. Examples of the contribution of sampling to the uncertainty of analytical results are discussed for some biological materials. Presented at the 2nd International Conference on Metrology – Trends and Applications in Calibration and Testing Laboratories, November 4–6, 2003, Eilat, Israel.