结合部切向接触刚度分形模型研究

根据球体与平面接触的切向接触刚度和粗糙表面的接触分形理论，从理论上首次建立了结合部切向接触刚度分形模型，该模型具有尺度独立性。通过对所建模型的数字仿真，直观地给出了结合部切向接触刚度与其影响因素之间的非线性关系，并与实验研究结果具有较好的一致性，从而说明了该模型是合理的。     

Effect and importance of static-load on airflow resistivity determination and its consequences on dynamic stiffness

Airflow resistivity is a physical parameter which characterizes porous and fibrous sound absorbent materials. It is well-known that such property allows the evaluation of the acoustic behaviour of sound absorbent materials in various fields of application, including automotive noise mitigation, architectural acoustics and building acoustics. In structure-borne sound insulation, airflow resistivity is essential for the evaluation of the dynamic stiffness of porous and fibrous resilient insulating materials used as underlay in floating floors.However, an inconsistency between the dynamic stiffness and the airflow resistivity test conditions can be recognized. In order to evaluate dynamic stiffness of a resilient material, a static load of about 2 kPa is applied, while in airflow resistivity determination this condition is not explicitly required. As a result, the density of analyzed material, in dynamic stiffness and airflow measurements, is different. Since these two quantities are correlated, it is necessary to measure materials under the same conditions of applied static load.In this work the effects of static load (or density after compression) in airflow resistivity determination of various porous and fibrous resilient materials are investigated, and the consequent influence on dynamic stiffness is discussed. A simply empirical relation between density and airflow resistivity is also put forth.The main focus of this paper is to propose an harmonization among requirements of the Standards in order to prevent significant errors in dynamic stiffness determination and incorrect evaluations of the acoustic behaviour.     

Assessment of pulmonary artery stiffness using velocity-encoding magnetic resonance imaging: evaluation of techniques

The loss of pulmonary artery (PA) compliance has significant pathophysiological effect on the right ventricle. Noninvasive and reliable assessment of PA wall stiffness would be an essential determiner of right heart load and a clinically useful factor to assess cardiovascular risk. Two MRI techniques have been proposed for assessing PA stiffness by measuring pulse wave velocity (PWV): transit time (TT) and flow area (QA). However, no data are available that compares the two techniques and evaluates their performance, especially over a wide range of PWV values or at 3.0-T, which is the purpose of the present study. Thirty-three patients with different heart conditions were imaged using optimized high-temporal resolution and high-spatial resolution velocity-encoding MRI sequences. Statistical analysis was conducted to study intermethod, interobserver and intraobserver variabilities. The PWV measurements using TT and QA techniques showed good agreement (P>0.1). The Bland-Altman analysis showed negligible differences between the two methods (mean±S.D.=0.11±0.35 m/s, correlation coefficient r=0.94). The repeated measurements showed low interobserver and intraobserver variabilities, although the S.D. of the differences was larger in the QA technique. The mean±S.D. of the TT/QA measurement differences were −0.05±0.2/0.0±0.36 m/s and 0.02±0.26/0.02±0.39 m/s for the interobserver and intraobserver differences, respectively. In conclusion, each technique has its own advantages and disadvantages. The two techniques result in similar measurements, although the QA method is more subjective due to its dependency on operator intervention.     

Influence of Different Factors on the Stiffness and Strength of Multilayer Composite Elements

In the paper, the bending stiffness and strength of multilayer structural elements in relation to the mechanical properties of layers and their number layout and sizes are investigated and the corresponding correlations are established. It is found that the most rational structure of a multilayer element in bending is a symmetric three-layer structure formed from two materials with the thickness of the core less than the half-thickness of the element. The values of normal stresses in the layers of a multilayer beam in bending depends on its bending stiffness and the position of layers relative to the neutral axis. The influence of the number of layers on the stiffness of the structural element and on the magnitude of normal stresses is insignificant.     

On Calculating a Translational Flow Through a System of Circular or Spherical Layers with Different Permeabilities

The problem of finding the potential of a translational flow through a system of circular or spherical layers in a porous medium obeying Darcy's law is considered. The permeability coefficients change stepwise across the interface. The method is based on deriving special recurrence relations which give a rational dependence of the potentials on the permeability coefficients suitable for specific calculations.     

HT-7U超导托卡马克装置极向场线圈的等效弹性常数及其残余刚度

HT－7装置的超导极向场线圈由导管，超导材料和绝缘体组合而成，具有复杂的正交各向异性的性质。本文从微观力学的观点出发，将极向场线圈整体作为一种复合材料来考虑，采用微观力学的复合律和损伤力学的细观损伤模型，求出了极向场线圈的等效弹性常数和残余刚度；并且，残余刚度的计算结果已得到了实验验证。这些材料特性已被用于有限元分析的输入数据。     

磨削粗糙表面法向接触刚度研究

为更加准确地描述机械磨削表面的接触刚度,本文在现有统计分析理论的基础上,提出了一种新的粗糙表面接触模型。模型针对接触表面微凸体形貌,将原有的球体假设采用cos函数曲线回转体代替,在假设形貌的基础上重新解算了微凸体弹塑性变形的临界压入深度,推导出了接触区域真实接触压力与接触刚度关系表达式。通过数值仿真方法得到了不同塑性指数下平均距离、接触刚度与接触压力之间的变化关系。对比结果显示,随着塑性指数的增大,本文模型的平均距离与球形模型的平均距离之间的差值逐渐增大。在接触刚度方面,本文模型相比球形模型更加贴近实验结果,并且随着塑性指数的增加,球形模型与本文模型之间的差值越来越大。本文模型结果与实验数据的相对偏差能够控制在5%以内,从而验证了本文模型的正确性,为更加准确地描述磨削表面零件的接触行为提供理论基础。     

抗扭刚度自动测定仪的研究

本文详细介绍了基于电磁涡流比拟理论运用微电脑和辅助机构，研究制造的抗扭刚度自动测定仪的基本原理，系统的误差分析等。对工程轴类以及几种特殊面杆件的抗扭刚度进行了测试研究。     

非协调四结点平面等参位移元新列式方法

本文导出一种等参协调元位移函数的新的表示方法,在此基础上建立起了构造等参非协调元的新方法。作为实例,构造出两个可以给出单刚显式的四结点平面非协调新单元。     

微加速度传感器的结构刚度分析新法

微传感器结构刚度是优化传感器结构尺寸、研究传感器动态响应特性的一个重要参数．目前多采用有限元分析获取这一参数,但该方法难于给出一个物理思想比较明确的解析表达式．针对自主开发设计的一种具有复杂微结构的加速度传感器,提出综合运用力法和能量法原理求解其主轴刚度,并通过仿真分析验证了理论推导．理论计算与仿真分析的结果有较好的一致性．该方法可推广应用于具有对称、静不定微结构的加速度传感器的刚度分析．