Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

聚合物载体－稀土金属络合物的研究ⅩⅤ．聚（苯乙烯－丙烯酰胺）载体－氯化钕络合物对异戊二烯聚合的催化行为

研究了聚（苯乙烯－丙烯酰胺）（ＰＳＡＣ）载体－氯化钕（ＮｄＣｌ３）络合物对异戊二烯（Ｉｐ）聚合的催化行为．ＰＳＡＣ·ＮｄＣｌ３络合物保留了小分子稀土催化剂对双烯烃聚合的催化规律和高度的定向效应．络合物的催化活性随着Ｎｄ／Ｉｐ和Ａｌ／Ｎｄ比的增加而增加，所得聚异戊二烯的特性粘数［η］却随之下降．聚异戊二烯的顺式－１，４结构含量达９５％．此外，ＰＳＡＣ·ＮｄＣｌ３络合物的活性受ＰＳＡＣ和ＰＳＡＣ·ＮｄＣｌ３的组成与结构的影响．在一定的条件下，络合物的活性随着ＰＳＡＣ中功能团含量的增加而下降．ＰＳＡＣ中单体链节交替分布的程度越低，络合物的活性越高     

钙钛矿型CaSiO_3解压缩和重压缩过程的分子动力学模拟

用分子动力学模拟方法 (MD)研究了 3 0 0K时钙钛矿型CaSiO3 ,从高压到负压的解压缩过程 .MD模拟获得的P V关系与实验数据相近 ,与已报道的MD模拟数据基本一致 ,所得体积模量也在实验数据分布范围内 .减压缩和重压缩的MD模拟数据与实验结果相似 .钙钛矿型CaSiO3 解压缩成非晶态时 ,存在两个结构破坏阶段 :破坏硅氧八面体和破坏钙氧二十面体 .当钙氧二十面体被破坏后 ,重压缩不能得到钙钛矿型结构 .只要钙氧二十面体未被破坏 ,重压缩可恢复钙钛矿型结构 .本研究得到的结果尚未见相关报道 .由MD模拟数据计算了CaSiO3 系统的红外光谱 ,分析这些数据可知钙钛矿型CaSiO3 解压缩非晶化是一个二阶软模相变 .研究表明钙钛矿型CaSiO3 结构存在一个等容的亚稳极限 ,其解压缩非晶化是一个受动力学控制的亚稳状态 .     

多壁碳纳米管负载铂的甲苯加氢脱芳催化剂

以多壁碳纳米管(CNTs)为载体制备了负载型Pt催化剂Pt/CNTs并将其用于催化甲苯加氢脱芳(HDA)反应.结果表明,在1.0%Pt/CNTs催化剂上,在0.4MPa,373K,PhCH3/H2摩尔比=6/94和GHSV=120L/(h.g)的反应条件下,甲苯转化率可达100%,比反应速率为0.0523mmol/(s.m2),分别是γ-Al2O3和AC负载各自最佳Pt负载量催化剂1.4%Pt/γ-Al2O3和2.4%Pt/AC上相应值的1.17和1.18倍.甲苯加氢产物全部为甲基环己烷,其他可能的加氢产物均在气相色谱检测限以下.催化剂的表征研究揭示,用CNTs代替γ-Al2O3或AC作为载体并不会引起所负载Pt催化剂上甲苯HDA反应的表观活化能发生明显变化.与γ-Al2O3或AC负载的相应催化剂相比,一方面,CNTs负载的Pt催化剂易于在较低温度下还原活化,并且其工作态催化剂表面催化活性Pt物种(Pt0)所占表面Pt摩尔分率有所提高;另一方面,CNTs负载的Pt催化剂对H2具有较高的吸附/活化和储存能力.这些促进效应对催化剂HDA活性的提高都有重要贡献.     

Polymeric Pd catalysts for the reduction of acetamidocinnamic acid azlactone and its solvolysis products

Pd complexes have been obtained from linear and cross-linked copolymers ofR,S-, R-, andS-1-(4-vinylphenyl)ethylamine (1) with styrene and divinylbenzene. Reduction of these compounds gave catalysts which were active in the reductive solvolysis of -acetaminocinnamic acid azlactone (2) and hydrogenation of the solvolysis products -acetamidocinnamic acid (ACA), its esters, and its 1-phenylethylamide. The catalysts showed no enantioselective properties in the reductive hydrolysis, but were more active than the catalyst obtained in the absence of the polymer (the monomeric analog). The use of polymeric catalysts has shown that, in reductive aminolysis, the chiral nucleophile plays the dominant part in determining the stereoselectivity of the reaction, rather than the chiral ligand of the catalytic complex. The polymer matrix stabilizes the low-valent state of the palladium in the complex. In the hydrogenation of ACA and its esters, the catalyst on the cross-linked polymer is much more active than its monomeric analog, but showed no enantioselectivity. Hydrogenation of acetamidocinnamic acidR-andS-1-phenylethylamides on a chiral Pd-polymer catalyst occurred with double asymmetric induction.Deceased.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. A. V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, 117912 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2368–2380, October, 1992.     

Synthesis and Structure Characterization of a Tetranuclear Manganese(Ⅲ) Complex:[Mn4O2(O2CMe)6(MeOH)2(dbm)2]·2MeCOOH·2CH2Cl2

The title compound, [Mn4O2(O2CMe)6(MeOH)2(dbm)2]·2MeCOOH·2CH2Cl2 (Hdbm = dibenzoylmethane), has been synthesized and structurally determined by single-crystal X-ray diffraction. The crystal belongs to triclinic, space group P(-l), with a = 10.729(3), b = 12.269(3), c =13.085(4) (A), a = 106.367(3), β = 107.643(2), γ = 94.771(2)°, V = 1547.9(7) (A)3, Z = 1,C50H64Cl4Mn4O24, Mr= 1410.57, Dc= 1.513 g/em3, F(000) = 724, Rint = 0.0147, T = 293(2) K and μ = 1.046 mm-1. The fimal R = 0.0359 and wR = 0.0938 for 5791 observed reflections with I ＞ 2( )I).The structure of the complex consists of one [Mn4(μ3-O)2]8+ core with four coplanar Mn atoms disposed in an extended "butterfly-like" arrangement and two O atoms triply bridging each "wing",and the peripheral ligation is provided by six μ2-MeCO2-, two terminalμ2-dbm- groups at the two hydrogen bonding interactions are found within the structure of the compound.     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

制备参数对Au／Fe2O3催化剂水煤气变换性能的影响

 采用共沉淀法制备了Au／Fe2O3催化剂，并系统地考察了制备参数对其催化WGS性能的影响．通过BET，XRD，XRF，H2－TPR和HRTEM等表征手段，初步考察了Au／Fe2O3催化剂具有高催化活性的原因．结果表明，金负载量、沉淀剂种类、沉淀方式、沉淀pH值、焙烧气氛和焙烧温度对Au／Fe2O3催化剂的催化性能均具有较大的影响．Au／Fe2O3催化剂的低温高活性是纳米Au与Fe3O4协同作用的结果；Au／Fe2O3催化剂的高温活性是由于活性相Fe3O4起主要作用的结果．纳米Au粒子的烧结会降低其催化活性．     

担载Ru_3（CO）_（12）－Fe_2（CO）_9混合簇的脱羰基作用和表面加氢反应

担载于ＺｒＯ２上的Ｒｕ３（ＣＯ）１２－Ｆｅ（ＣＯ）９混合簇的红外光谱表明，Ｒｕ３（ＣＯ）１２以Ｒｕ（ＣＯ）２Ｏ２表面络合物存在．混合族在真空中随温度升高而发生脱羰基作用，５００℃左右羰基完全脱掉；以Ａｌ２Ｏ３为载体者其羰基不易脱除，升高温度出现多种羰基带．混合簇中的Ｆｅ２－（ＣＯ）９极易脱羰基．担载混合簇在Ａｒ气中进行ＴＰＤＥ时，低温时以脱羰基为主，高于１５０℃时发生表面歧化反应而生成ＣＯ２；在Ｈ２气中，低温时仍以脱羰基为主，高于１５０℃时发生表面加氢反应而生成ＣＨ４．混合簇的脱羰基和表面反应能力与Ｒｕ／Ｆｅ比及载体有关．担载混合簇在ＣＯ加氢反应中以Ｒｕ（ＣＯ）２Ｏ２和分散Ｆｅ存在，还出现－ＣＨｘ多种表面物种．