Numerical simulation: The dynamic behavior of reinforced concrete plates under normal impact

This investigation deals with the use of the finite element method on the reinforced concrete structural dynamic response and failure behavior when subjected to the projectile impacts of different velocities, using the test conducted in [S.J. Hanchak, M.J. Forrestal, E.R. Young, J.Q. Ehrgott, Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengths, Int. J. Impact Eng. 12 (1992) 1–7]. The Johnson–Holmquist concrete material constitutive law model is employed to simulate the large strains, high strain states and high pressures to which the concrete is subjected. The projectile impact velocity ranges from 381 m/s to 1058 m/s. Numerical simulations demonstrate that the Johnson–Holmquist concrete material constitutive model can describe the different failure modes without any predefined defects in the element mesh, and normally obtain good agreement between the numerical simulations and test results.     

土中爆炸冲击混凝土道面的数值模拟

炸药在多相介质中的爆炸是气态爆轰产物和固态介质之间的耦合作用问题，对其进行数值模拟一般不考虑炸药而直接将爆轰压力加在介质上，而耦合方法对炸药和其周围的介质进行离散，炸药和介质采用统一的控制方程，通过界面条件实现相互作用。任意拉格朗日欧拉（Arbitary Lagrangian and Eularian）法，是最近兴起的适用于计算固体大变形问题的数值计算方法。将其引入爆炸力学计算，可以避免由于物质的大变形引起的单元畸变和计算困难。同时混凝土的损伤模型，更加符合混凝土在高应变率加载条件下的力学特性和破坏机理。将这三种方法引入数值模拟，计算结果与相关试验结果有较好的吻合。     

Simulation of crack spacing using a reinforced concrete model with an internal length parameter

Summary A gradient-enhanced smeared crack model and bond-slip interface elements are utilized in finite element simulations of reinforced concrete. The crack model is rooted in an enhanced plasticity theory. It uses the Rankine failure surface dependent on an equivalent inelastic strain measure as well as on its Laplacian. As a result, finitely sized fracture process zones and realistic crack spacings are obtained. A reinforced concrete bar in uniaxial tension is analyzed to demonstrate the regularizing influence of the internal length parameter in the model and to evaluate the influence of the model parameters on the energy dissipation in multiple cracks. A comparison of numerical simulations with experimental results for a beam without shear reinforcement in four-point bending concludes the analysis. Received 4 November 1997; accepted for publication 23 April 1998     

多孔饱和半空间上刚体垂直振动的轴对称混合边值问题

研究圆柱形刚体在多孔饱和半空间上的垂直振动．首先应用Ｈａｎｋｅｌ变换求解多孔饱和固体的动力基本方程———Ｂｉｏｔ波动方程．然后按混合边值条件建立多孔饱和半空间上刚体垂直振动的对偶积分方程，用Ａｂｅｌ变换化对偶积分方程为第二类Ｆｒｅｄｈｏｌｍ积分方程．文末给出了多孔饱和半空间表面动力柔度系数的计算曲线．     

Studies on Stress Transference Mechanism of Steel Fibre Reinforced Concrete

ＩｎｔｒｏｄｕｃｔｉｏｎＨｏｗｔｈｅｉｎｔｅｎｓｉｏｎａｎｄｍｏｄｕｌｅｏｆｓｔｅｅｌｆｉｂｒｅｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅ (ＳＦＲＣ)ｄｅｐｅｎｄｓｏｎｉｔｓｃｏｎｓｔｉｔｕｅｎｔｐｒｏｐｅｒｔｉｅｓａｎｄｃｏｎｔｅｎｔｉｓａｐｒｉｎｃｉｐａｌｐｒｏｂｌｅｍｔｏｐｒｅｄｉｃｔｍａｃｒｏ＿ｍｅｃｈａｎｉｃｓｐｒｏｐｅｒｔｉｅｓｏｆＳＦＲＣ,ｔｈｅｋｅｙｃｏｎｓｉｓｔｓｉｎｔｈｅｃｏｎｆｉｒｍａｔｉｏｎｏｆｓｔｒｅｓｓｄｉｓｔｒｉｂｕｔｉｏｎ .Ｉｎｔｅｒｆａｃｉａｌｓｔｒｅｓｓｔｒａｎｓｆｅ…     

Numerical simulation of a fluid-saturated soil under a dynamically loaded pile

The behaviour of the soil under a dynamically loaded pile toe is studied. The soil is modelled as a fluid saturated porous continuum. The constitutive behaviour of the solid skeleton is described by the elasto-plastic model of Drücker-Prager. The wave propagation is simulated with a dynamical finite-element program.A two-phase model of soil gives useful information about effective stress and pore pressure in the soil. In saturated soil the main wave under the pile toe propagates more downards than in dry soil, due to the higher compressional stiffness in saturated soil. The plastic zone under the pile toe propagates with the velocity of the fast compressional wave. The pore fluid influences the plasticity strongly and can be expected to affect pile driving too.The distribution of effective stress and pore pressure under the pile toe depends on the permeability of the soil and cannot be calculated uniquely from a single-phase calculation. Therefore, a nonlinear soil cannot be modelled correctly as a conventional single-phase material.     

Transition Metal Free Chemoselective Reduction of α,β‐Unsaturated Ketones to Saturated Ketones Using Tosyl Hydrazide as a Hydrogen Donor

An efficient, inexpensive and simple method for the reduction of various α,β‐unsaturated ketones to corresponding saturated ketones using tosyl hydrazide as a hydrogen donor in DMF using calcium oxide powder has been reported. A variety of enones underwent reduction without forming undesirable side products. High chemoselectivity, broad functional group tolerance and good yields are the noteworthy features of this protocol.     

混凝土轴拉加卸载随机损伤模型的建立与试验验证

为了分析及深入探讨混凝土在受拉加载及卸载情况下的力学特性,基于随机损伤本构关系提出了一种混凝土轴拉加卸载模型,推导出了混凝土加卸载的应力 应变关系表达式.为了印证理论表达式,进行了混凝土轴向拉伸及加卸载的试验研究,测得了混凝土的材料参数及其相应的轴拉加卸载应力-应变曲线.结合模型的计算结果,对混凝土的轴拉加卸载试验结果进行了对比分析,结果表明:混凝土轴拉加卸载模型能够预测混凝土的极限强度,同时能描述混凝土的强度软化、加载过程中的弹模折减及卸载后的塑性变形.     

混凝土破裂过程的三维数值模型

利用混合同余法产生了随机变量,将混凝土中的骨料简化为球体,采用循环比较法将随机变量赋给球心坐标(X,Y,Z),实现了混凝土骨料的空间随机分布,最终建立了三维混凝土数值模型。对模型整体进行单元剖分,将骨料、砂浆、界面层分别投影到该有限元网格中,采用多次网格划分技术完成模型网格划分。通过对算例进行有限元计算,结果表明该模型基本上反映了混凝土骨料分布的实际情况,较好地模拟了混凝土的不均匀性与各向异性,验证了建立该模型的方法是可行的。     

基于SMP破坏准则的饱和砂土弹塑性本构模型

利用土体的塑性流动理论，提出了用于描述饱和砂土在单调荷载作用下的应力一应变反应性质的弹塑性本构模型。土体总的变形由三部分组成：即弹性应变、与体积屈服机制相关的塑性应变和与剪切屈服机制相关的塑性应变，其中与剪切屈服机制相关的塑性应变的得出是基于SMP破坏准则。通过将模型预测的结果与试验结果进行对比，表明该模型能够较为准确地描述饱和砂土在单调加载条件下的反应性质。