作动器参数对结构性能的影响和调整受力状态的实施策略模拟

基于规划法研究了作动器各参数对自适应超静定桁架性能的影响。该规划法能够使结构工作状态更合理化。这一方法能够改善自适应结构的工作状态因而提高承载能力。以此为基础，研究了具有作动器的组合杆的有关参数诸如变形上限、刚度和承载力上限对于控制效果的影响。从而为作动器的合理选择提供了理论根据。对于调整作动器变形以控制结构强度的实施策略进行了模拟和分析。该策略包括3部分：1．模拟和分析了“加载、调控、卸载”重复循环直至调控的完成；2．不同作动器按比例同时放大变形直到调控实现；3．多次加载、调控同一次加载、调控结构的等价性。研究表明本文提出的使结构工作状态合理化的调控过程是安全、可靠和灵活的。     

Electrochemical assessment of water|ionic liquid biphasic systems towards cesium extraction from nuclear waste

A room temperature ionic liquid (IL) composed of a quaternary alkylphosphonium (trihexyltetradecylphosphonium, P₆₆₆₁₄⁺) and tetrakis(pentafluorophenyl)borate anion (TB⁻) was employed within a water|P₆₆₆₁₄TB (w|P₆₆₆₁₄TB or w|IL) biphasic system to evaluate cesium ion extraction in comparison to that with a traditional water|organic solvent (w|o) combination. ¹³⁷Cs is a major contributor to the radioactivity of spent nuclear fuel as it leaves the reactor, and its extraction efficiency is therefore of considerable importance. The extraction was facilitated by the ligand octyl(phenyl)-N,N′-diisobutylcarbamoylphosphine oxide (CMPO) used in TRans-Uranium EXtraction processes and investigated through well established liquid|liquid electrochemistry. This study gave access to the metal ion to ligand (1:n) stoichiometry and overall complexation constant, β, of the interfacial complexation reaction which were determined to be 1:3 and 1.6 × 10¹¹ at the w|P₆₆₆₁₄TB interface while the study at w|o elicited an n equal to 1 with β equal to 86.5. Through a straightforward relationship, these complexation constant values were converted to distribution coefficients, δ_α, with the ligand concentrations studied for comparison to other studies present in the literature; the w|o and w|IL systems gave δ_α of 2 and 8.2 × 10⁷, respectively, indicating a higher overall extraction efficiency for the latter. For the w|o system, the metal ion-ligand stoichiometries were confirmed through isotopic distribution analysis of mass spectra obtained by the direct injection of an emulsified water–organic solvent mixture into an electron spray ionization mass spectrometer.     

Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).     

基于PH服务的工作休假排队的流体模型

研究了带有单重工作休假的M/PH/1排队系统驱动的流体模型.首先,通过拟生灭过程和矩阵几何解法分别得到无穷小生成元和驱动过程的稳态队长分布.其次,建立并分析流体模型,根据平衡方程给出流体模型的稳态联合分布函数满足的矩阵微分方程组,利用Laplace变换（LT）和Laplace-Stieltjes变换（LST）的方法,推导出平稳缓冲器（库）容量的空库概率表达式和稳态条件下的缓冲器（库）容量的均值表达式.最后,给出模型在移动自组织网络（Ad Hoc）中的应用,并通过数值例子讨论系统参数对系统性能指标的影响.     

具有工作故障及有限容量的MAP/M/1排队系统性能分析

为了拓展随机排队理论,在具有工作故障的MAP/M/1排队的基础上,引入有限容量策略建立起一个新的排队模型.通过Uniformization Technique将连续时间排队模型转化成对应的离散时间排队模型,运用矩阵几何组合解给出系统中的顾客数量和服务器状态的联合稳态概率表达式,并给出基于稳态概率的性能指标.最后通过一些数值例子展示参数对性能指标的影响.     

对立方型状态方程的分析和改进及对超临界工质的计算

1对现有立方型状态方程特性的分析研究与改进现有的立方型状态方程无论是SRK方程还是PR方程都有其固定的适用范围，井且与偏心因子有关。另外，这两个方程的引力项中均引人温度函数叫Tr；叫。但是，偏心因子。不反映强极性物质的特点，这对计算强极性质起不到应有的作用，还有这两个方程中的常数a和b，其系数几和成都是定值，特别是门数值偏大，对计算液体密度是不利的，甚至有时还出现摩尔体积比6值还小，即V＜6，这是很不合理的。在超临界流体区流体密度也比较大，相当于液体密度，故这种状态方程也不适用，基于这些不足之处，本文作者…     

光学仪器胶粘剂应用现状及进展

本文是在对国内光学零件加工及光学仪器产品胶粘剂的应用现状与研究动态的调研基础上，结合作者的工作，综合介绍了光学零件加工过程中工艺用粘接材料与工艺材料用树脂结合剂；光学零件、光学分划元件、光学偏振元件、光学塑料元件等的胶合用光学胶；光学仪器产品结构用结构胶及非结构胶；光学仪器产品及部件用密封胶等的应用现状及其进展概况     

准二级压缩空气源热泵系统的变工况试验研究

介绍了准二级涡旋压缩机空气源热泵系统,对研制出的具有蒸汽喷射的涡旋压缩机空气源热泵系统样机进行了大范围变工况试验研究,获得机组在各工况下的输入功率、制热量、COP、排气温度的变化。通过变工况实验,综合考虑制热量、COP和机组工作稳定性,得出准二级压缩热泵系统最佳中间补气压力为1200kPa~1400kPa。研究结果可为准二级压缩系统设计与应用提供参考。     

基于孔径分布概念的全景系统光学设计

为了改变坦克现有探测与观瞄系统低效、精确性不足等弱点,进行基于孔径分布概念的全景系统光学设计。原理是利用4个孔径大于90°的物镜对360°全景图像信息进行孔径分布实时采集,采集的四路图像通过内部转像系统的折转汇成一路,由一个CCD接收,提供准确和平整的全景图拼贴的图像,对系统理想情况下的发现和分清目标距离以及盲区范围进行估算,并通过光线追迹估算出系统失效探测距离。系统在57 m~6.45 km的工作距离内,实现全方位、实时性的观瞄与探测功能。     

基于CPLD工作模式可调的线阵CCD驱动电路设计

针对传统驱动电路一旦做出修改,则需对硬件或程序进行改变的缺点,以型号为TCD1707D的线阵CCD为例,介绍了一种工作模式可调的驱动方法.该方法是利用复杂可编程逻辑器件和控制外端结合,通过分别设置内外触发来实现的.在外触发模式下,利用外触发脉冲,可由用户控制CCD的曝光和信号输出时间;内触发时,可以调节CCD的积分时间和驱动频率.为提高信号输出质量,针对EMC问题给出了线阵CCD的外围驱动电路.实验结果表明,该方法调试方便、电路结构简单、集成度较高、输出信号可靠稳定、受干扰小,可配合多种用户需要,对高速精确测量及线阵推扫模式具有一定参考价值.