Mössbauer study on LiFePO4 cathode material for lithium ion batteries

Crystalline LiFePO₄ has been synthesized using solid-state, spray pyrolysis, and wet chemical methods. The crystal parameters were obtained from Rietveld’s refinement methods of the X-ray diffraction patterns. A detailed investigation of the Fe valency carried out using Mössbauer spectroscopy at room temperature indicates that Fe is predominantly present in its bivalent state.     

Numerical analysis of a model of cure process for composites

We consider a composite material composed of fibres included in a resin which becomes solid when it is heated up (reaction of reticulation). The mathematical modelling of the cure process is given by a kinetic equation describing the evolution of the reaction of reticulation coupled with the heat equation. In this paper, we are interested in the computation of approximate solutions. We propose a family of discretized problems depending on two parameters (β₁, β₂) ε [0, 1]² which split the linear and non‐ linear terms in implicit and explicit parts. We prove the stability and convergence of the discretization for any (β₁, β₂) ε [½, 1 ] × [0, 1]. We present also some numerical results. Copyright © 2006 John Wiley & Sons, Ltd.     

聚合物纳米孔隙增透膜制备工艺的研究

论述了聚合物纳米孔隙增透膜的制备工艺流程,分析了聚合物材料分子量、实验环境温度和湿度、溶剂挥发性等条件对纳米孔隙增透膜的影响。研究表明,聚合物材料分子量的增大、温度的降低、湿度的升高以及采用挥发性弱的溶剂都将导致增透膜孔隙尺寸的增大,孔隙越大其对光的散射损耗就会增大,所以增透膜的透过率就越低。通过大量的试验分析得出一组较理想的工艺参量:使用低分子量的聚合物材料(小于15 kg/mol),环境温度大于25℃、环境相对湿度小于30%,在采用低沸点的溶剂如四氢呋喃等措施下可有效降低增透膜散射损耗。     

The nanogranular nature of C-S-H

Despite its ubiquitous presence as binding phase in all cementitious materials, the mechanical behavior of calcium-silicate-hydrates (C-S-H) is still an enigma that has deceived many decoding attempts from experimental and theoretical sides. In this paper, we propose and validate a new technique and experimental protocol to rationally assess the nanomechanical behavior of C-S-H based on a statistical analysis of hundreds of nanoindentation tests. By means of this grid indentation technique we identify in situ two structurally distinct but compositionally similar C-S-H phases heretofore hypothesized to exist as low density (LD) C-S-H and high density (HD) C-S-H, or outer and inner products. The main finding of this paper is that both phases exhibit a unique nanogranular behavior which is driven by particle-to-particle contact forces rather than by mineral properties. We argue that this nanomechanical blueprint of material invariant behavior of C-S-H is a consequence of the hydration reactions during which precipitating C-S-H nanoparticles percolate generating contact surfaces. As hydration proceeds, these nanoparticles pack closer to center on-average around two characteristic limit packing densities, the random packing limit (η=64%) and the ordered face-centered cubic (fcc) or hexagonal close-packed (hcp) packing limit (η=74%), forming a characteristic LD C-S-H and HD C-S-H phase.     

Instrumental neutron activation analysis of mass fractions of toxic metals in plastic

It is very challenging to decompose a plastic product for the purpose of analysis of hazardous elements contained. To circumvent such technical problem, it is imperative that an analyst employ a nondestructive analytical method free of any pretreatments. The analytical results of the concentrations of toxic metals such as Cd and Cr in polypropylene for seven samples at two different levels were obtained using the instrumental neutron activation analysis. This work was intended ultimately to establish certified reference materials (CRMs) of these metals in the polypropylene, traceable to the SI. The uncertainties associated with the analytical procedures were estimated in accordance with the ISO guideline. The results were subsequently validated by a comparison with those for CRM-680 and −681 of the Bureau Communautaire de Reference (BCR), which demonstrated acceptable agreement within their uncertainty ranges.     

非均匀多孔介质有效热导率分析

本文采用控制容积法,界面调和平均导热系数值以及图形处理方法对典型非均匀多孔介质硬质聚氨酯泡沫材料的导热过程进行了分析与模拟计算。结果表明:多孔介质的内部结构是影响温度分布和热量传递的主要的因素,其影响程度与骨架和孔隙的导热系数,孔隙的大小和分布有关;计算得到的有效热导率值与文献中实验测量结果吻合较好。本文的研究结果可以推广到更为复杂的非均匀多孔介质的场合,从而可以进一步认识非均匀多孔介质中的导热规律,为工程计算提供更精确的计算方法。     

锂离子电池硅基负极材料的研究进展

硅基材料是新一代高容量锂离子蓄电池负极材料的典型代表,近年来已成为理论研究和应用研究的热点.本文介绍了锂离子电池硅基负极材料的制备方法、电化学性能及其研究现状,分析了硅材料作为锂离子电池负极材料存在的问题;讨论了硅材料作为锂离子电池负极材料的研究前景.并指出若能克服目前存在问题,将有望成为新一代锂离子电池负极材料.     

Body waves in fractured porous media saturated by two immiscible newtonian fluids

A study of body waves in fractured porous media saturated by two fluids is presented. We show the existence of four compressional and one rotational waves. The first and third compressional waves are analogous to the fast and slow compressional waves in Biot's theory. The second compressional wave arises because of fractures, whereas the fourth compressional wave is associated with the pressure difference between the fluid phases in the porous blocks. The effects of fractures on the phase velocity and attenuation coefficient of body waves are numerically investigated for a fractured sandstone saturated by air and water phases. All compressional waves except the first compressional wave are diffusive-type waves, i.e., highly attenuated and do not exist at low frequencies.Now at Izmir Institute of Technology, Faculty of Engineering, Gaziosmanpasa Bulvari, No.16, Cankaya, Izmir, Turkey.     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

可降解磷酸酯聚合物的合成与应用研究进展

磷酸酯类聚合物在自然界中可以降解,是环境友好的化学品.其中,分子量高的聚磷酸酯近年来在医药、塑料助剂等方面有广泛应用,分子量相对较低的磷酸酯类聚合物在饲料、表面活性剂等方面很重要.按用途的不同,综述了可降解磷酸酯聚合物的合成与应用近况.