玻璃态高聚物细观损伤断裂统计力学

对玻璃态高聚物内部细观损伤断裂判据、机理、动力学及统计模型的最新进展，进行了较为全面、系统的介绍和总结，并简要概述了细观损伤统计描述在金属材料及玻璃态高聚物领域里的应用。     

疲劳损伤问题中有效应力的一种定义

有效应力是损伤力学中的一个重要概念,这个概念的提出为用无损状态下的本构方程描述有损伤材料的行为提供了有效手段.本文探讨损伤力学中有效应力的定义,通过对损伤演化规律的分析,指出有效应力的一般定义不适用于疲劳损伤问题.本文认为,疲劳问题中的有效应力应该以等效寿命为基础,并根据剩余寿命的概念引入了疲劳损伤问题中有效应力的一种定义.     

疲劳损伤伤演方程中材料常数的确定

损伤力学作为近年来固体力学的一个非常活跃的分支,其本构关系和损伤演化方程是核心内容。损伤演化方程中材料常数的确定,是损伤力学中最基本却很重要的工作。利用大范围损伤下的预估拉压和弯曲疲劳裂纹形成寿命的封闭解答,应用最小二乘法给出了确定损伤演化方程dD/dN=α(Δε)m中材料常数α、m的方法。该方法可作为确定这种类型损伤演化方程材料常数的一般方法。     

负温钢纤维混凝土受压损伤过程的实验研究

利用岩石力学试验系统(RMT)对负温下钢纤维混凝土进行了单轴压缩实验,测得了-5℃、-10℃、-15℃、-20℃下钢纤维混凝土的应力-应变曲线、杨氏模量、极限应力、泊松比等。实验结果表明材料的强度、杨氏模量随温度的下降而上升,尤其是当温度由-10℃下降至-15℃时,这些物理量变化特别显著,之后它们将逐渐趋于某一稳定值。本文对钢纤维混凝土力学性能的温度效应进行了分析并对实验结果进行了细观上的讨论。最后针对负温钢纤维混凝土应力-应变曲线的特点,基于塑性力学和损伤力学理论,建立了负温钢纤维混凝土的含损伤本构方程。该方程物理概念清晰,形式简单,具有一定的应用参考价值。     

Micromechanics-based elastic damage modeling of particulate composites with weakened interfaces

A micromechanical framework is proposed to predict the effective elastic behavior and weakened interface evolution of particulate composites. The Eshelby’s tensor for an ellipsoidal inclusion with slightly weakened interface [Qu, J., 1993a. Eshelby tensor for an elastic inclusion with slightly weakened interfaces. Journal of Applied Mechanics 60 (4), 1048–1050; Qu, J., 1993b. The effect of slightly weakened interfaces on the overall elastic properties of composite materials. Mechanics of Materials 14, 269–281] is adopted to model spherical particles having imperfect interfaces in the composites and is incorporated into the micromechanical framework. Based on the Eshelby’s micromechanics, the effective elastic moduli of three-phase particulate composites are derived. A damage model is subsequently considered in accordance with the Weibull’s probabilistic function to characterize the varying probability of evolution of weakened interface between the inclusion and the matrix. The proposed micromechanical elastic damage model is applied to the uniaxial, biaxial and triaxial tensile loadings to predict the various stress–strain responses. Comparisons between the present predictions with other numerical and analytical predictions and available experimental data are conducted to assess the potential of the present framework.     

电荷耦合器件在质子辐照下的粒子输运仿真与效应分析

应用蒙特卡洛方法计算了质子在科学级电荷耦合器件(charge-coupled device, CCD) 结构中的能量沉积, 并结合该CCD的质子辐照试验及退火试验数据, 分析了器件的辐射损伤机理. 仿真计算体硅内沉积的位移损伤剂量和栅氧化层的电离损伤剂量, 辐照与退火试验过程中主要考察暗信号、电荷转移效率两个参数的变化规律. 研究结果显示, 暗信号和电荷转移效率的变化规律与位移、电离损伤剂量一致; 退火后暗信号大幅度降低, 辐照导致的表面暗信号增加占总暗信号增加的比例至少为80%; 退火后电荷转移效率恢复较小, 电荷转移效率降低的原因主要为体缺陷. 通过总结试验规律, 推导出了电荷转移效率退化程度的预估公式及其损伤因子k_damage.     

混合堆第一壁中子辐照损伤模拟

利用蒙特卡罗程序和辐照损伤程序,通过构建模型,对常用的第一壁材料W,Fe,Be的中子辐照造成的离位损伤、裂变气体产生量进行了模拟计算,结果表明,混合堆与纯聚变堆相比,可以明显降低对第一壁材料的损伤要求。在W,Fe,Be三种材料之中,对于纯聚变堆来说,Be的离位损伤最小;对于混合堆来说,W的离位损伤、裂变气体产生量最低。从中子辐照损伤的角度来说,Be更适宜作纯聚变堆的第一壁材料,而W则更适宜作混合堆的第一壁材料。     

Surface modified microarray chip and laser induced fluorescence microscopy to detect DNA cleavage

This work describes a quantitative method to detect DNA damage in the presence of Pb and Cd ions using a surface modified microarray chip and a laser induced fluorescence microscopy (LIFM). The detection was carried out by the immobilization of a single-stranded DNA oligomer, tagged with a Cy5 fluorophore on a polydimethylsiloxane (PDMS) microarray chip followed by LIFM. Sulfosuccinimidyl-4-(N-maleimidomethyl) cyclohexane-1-carboxylate (Sulfo-SMCC) was attached as a cross-linker via the formation of covalent amide bonds. Then, the single-stranded DNA oligomer containing Cy5 as a fluorophore and thiol functional groups at both terminals, was bonded to the linker by reaction with sulfhydryl group. As the DNA oligomers were reacted with metal ions of Pb and Cd, the un-cleaved DNA oligomers were quantitatively identified by monitoring Cy5 fluorescence. Cadmium showed a quenching constant of 0.84 in the Stern–Volmer plot, whereas lead gave 0.22, indicating that cadmium ions suppress fluorescence more than lead ions. When optimized, fluorescence reductions of 23% (± 2.1) for Pb and 25% (± 1.4) for Cd were observed in air and decreased to almost < 5.0% in a radical scavenger of 5 mM. The cleaved DNA was also confirmed by MALDI-TOF-MS. In result, this experimental method using a microarray chip with surface modification provided quantitative determination of DNA oligomer damage with reproducible results, significantly reduced sample volumes and analysis times.     

Chemical synthesis, crystal structure and enzymatic evaluation of a dinucleotide spore photoproduct analogue containing a formacetal linker

Spore photoproduct (SP) is the exclusive DNA photodamage product found in bacterial endospores. Its photoformation and repair by a metalloenzyme spore photoproduct lyase (SPL) composes the unique SP biochemistry. Despite the fact that the SP was discovered almost 50 years ago, its crystal structure is still unknown and the lack of structural information greatly hinders the study of SP biochemistry. Employing a formacetal linker and organic synthesis, we successfully prepared a dinucleotide SP isostere 5R-CH(2) SP, which contains a neutral CH(2) moiety between the two thymine residues instead of a phosphate. The neutral linker dramatically facilitates the crystallization process, allowing us to obtain the crystal structure for this intriguing thymine dimer half a century after its discovery. Further ROESY spectroscopic, DFT computational, and enzymatic studies of this 5R-CH(2) SP compound prove that it possesses similar properties with the 5R-SP species, suggesting that the revealed structure truly reflects that of SP generated in Nature.