在PVA存在下Os-SnCl_2-亮绿离子缔合体系的研究高纯镍中微量Os的测定

本文研究了Os-SnCl_2-PVA-亮绿离子缔合体系的显色反应,摩尔吸光系数ε_(434)为5.6×10~6L·mol~(-1)·cm~(-1),锇含量在0.1～0.7μg/25mL范围内遵守比耳定律,室温下显色后,吸光度在110min内稳定。研究了30种外来离子的影响,并进行了高纯镍中微量锇的测定。     

卟啉试剂与贵金属高灵敏显色反应的研究 Ⅴ.Ru(Ⅲ)-T(4-AOP)P-TritonX-100体系

本文研究了在Ｃｄ（Ⅱ）和ＴｒｉｔｏｎＸ－１００存在下，ｍｅｓｏ－四（４－乙酰氧基苯）卟啉［Ｔ（４－ＡＯＰ）Ｐ］与钌（Ⅲ）的显色反应。结果表明，在ｐＨ９．７～１０．３介质中，Ｒｕ（Ⅲ）与Ｔ（４－ＡＯＰ）Ｐ形成了灵敏度很高的稳定络合物，其表观摩尔吸光系数为７．０４×１０５Ｌ·ｍｏｌ－１·ｃｍ－１。钌浓度在０～１．２μｇ／１０ｍＬ范围内服从比尔定律。络合物的摩尔比为Ｒｕ（Ⅲ）∶Ｔ（４－ＡＯＰ）Ｐ＝１∶１。在掩蔽剂存在下，方法有一定的选择性，应用于合成试样中钌的测定，结果满意。     

低温原子化石墨炉原子吸收法测定环境和生物样中的镉

本文描述了以氩/氢混合气体作保护气体,测定环境和生物样品中痕量镉的石墨炉原子吸收法。实验证明,与纯氩气作保护气体相比较用氩/氢混合气体作保护气体,能够降低镉的原子化温度(100℃),并且减少基体物质如MgCl_2和NaClO_4的干扰。这种改善氯化物和高氯酸盐基体干扰的机理,主要是由于氢的存在与基体中的氯形成高离解能的氯化氢,从而避免了通常在镉原子化之前形成易挥发的氯化镉而损失。用本方法测定了七种标准参考物质,结果与标准值一致,证明方法是可靠的。     

气相色谱-质谱联用技术测定水中油

本文综述了近年来用气相色谱法测定水中油的技术进展。引用文献13篇。     

同步荧光法同时测定苯甲酸和水杨酸的研究

根据苯甲酸与水杨酸在酸性条件下荧光光谱出现的差异，用同步荧光法同时测定其混合物中二组份。苯甲酸及水杨酸的检测限分别为０．２４μｇ／ｍＬ和０．２５μｇ／ｍＬ相对标准偏差分别为１．３％和１．２％。方法用于商品杀菌腐剂中苯甲酸与水杨酸的同时测定，结果满意。     

新显色剂1－（对－偶氮苯）－3－（2－噻唑）－三氮烯与锌显色反应的研究及应用

本文研究了新显色剂１－（对－偶氮苯）－３－（２－噻唑）－三氮烯在非离子表面活性剂ＴｒｉｔｏｎＸ－１００存在下，与锌（Ⅱ）显色反应的适宜条件。结果表明，在ｐＨ１３．０～１４．０范围内，锌（Ⅱ）与题示试剂形成１：３的稳定粉红色配合物，其最大吸收波长为５４５ｎｍ，试剂的最大吸收波长为４６３ｎｍ。配合物表现摩尔吸光系数在５４５ｎｍ处为９．６×１０￣４Ｌ·ｍｏｌ￣（－１）＊ｃｍ￣（－１）；０～２４μｇ／２５ｍＬＺｎ符合比耳定律。该试剂对锌的选择性良好。方法用于铝合金中锌的直接测定，结果令人满意。     

A Polarographic Study of ϵ-Caprolactam Complexes of Uranium and Tellurium

The polarographic behaviour of uranium and tellurium has been studied in the presence of increasing concentration of complex forming agent viz. ?-caprolactam at pH 4.4 for U(VI) and at pH 10.0 for Te(IV) at μ=0.1 M KNO₃. In both cases the waves have been found to be diffusion controlled and irreversible. The values of kinetic parameters (σπ_a and K°_f,h) have been calculated as a function of the ligand concentration. Method is suitable for the quantitative determination of these metals individually and simultaneously with the effect of diverse ions.     

Spectrophotometric studies and analytical application of Ce(III) chelates with 1-(2-pyridylazo)-2-naphthol (PAN)

A sensitive procedure for spectrophotometric determination of cerium(III) has been developed. AtpH 10.2 cerium reacts with 1-(2-pyridylazo)-2-naphthol in 40% ethanol to form a red complex which has an absorption maximum at 545 nm. The molar absorptivity at 545 is 3.95·10³ mol^–1. Maximum stability of the complex was attained in pure ethanol. The stoichiometries and structures of the chelates were studied applying conductometric titration, visible spectrophotometry and IR spectrophotometry. The IR spectra revealed that coordination takes place through the N=N, C-OH and pyridyl group.

---

Spektrophotometrische Untersuchungen und analytische Anwendung von Ce(III)-Chelaten mit 1-(2-Pyridylazo)-2-naphthol (PAN)

Zusammenfassung Es wurde eine empfindliche Methode zur spektrophotometrischen Bestimmung von Cer(III) entwickelt. Bei einempH von 10,2 reagiert Cer mit 1-(2-Pyridylazo)-2-naphthol in 40% Ethanol unter Bildung eines roten Komplexes mit einem Absorptionsmaximum bei 545 nm (=3 950). Der Komplex besitzt in reinem Ethanol ein Maximum an Stabilität. Die Stöchiometrien und Strukturen der gebildeten 1:1- und 1:2-Chelate wurden mittels konduktometrischer Titration, Elektronen- und IR-Spektrometrie untersucht. Die IR-Daten zeigen, daß die Koordination über N=N, C-OH und Pyridyl erfolgt.

     

Fluorimetric determination of ascorbic acid with o-phenylenediamine

A simple and sensitive fluorimetric method for the determination of ascorbic acid (AA) is described. The method is based on the condensation reaction between AA and o-phenylenediamine (OPDA) in the absence of the oxidant. The fluorescence intensity is measured at excitation and emission wavelengths of 360 and 430 nm, respectively. Under optimum condition, a linear relationship is obtained between the fluorescence intensity and the concentration of AA in the range of 0.05-40 μg ml⁻¹. The detection limit is 0.006 μg ml⁻¹, which is obviously lower than that of other fluorimetric methods reported.     

化学发光—流动注射—胶束增敏连续测定钴铬研究

基于钴（Ⅱ）和铬（Ⅲ）对鲁米诺－过氧化氢化学发光反应均有催化作用，加入ＣＴＭＡＢ能明显提高发光的信噪比，可测定亚纳克量的钴和铬，加入ＥＤＴＡ掩蔽钴（Ⅱ）测得铬（Ⅲ）量，再由钴和铬总量求得钴（Ⅱ）量，实现钴和铬的不经分离而流动注射连续测定。此法线性范围宽达４个数量级（１０－１１～１０－７ｇ／ｍＬ），检测下限低（Ｃｏ２＋１．２×１０－１１ｇ／ｍＬ，Ｃｒ３＋１．０×１０－１１ｇ／ｍＬ），再现性好，工效高（１２０个样品／ｈ），用于三种矿泉水中痕量钴（Ⅱ）、铬（Ⅲ）连续测定，结果良好